[Enter `^Ec?' for help] [spying] [ OK ] Created slice User Slice of ubuntu. [ OK ] Started Session 3 of user ubuntu. + ethtool enp3s0f0 + grep -q 'Link detected: yes' + ifconfig enp3s0f0 down [ 38.789374] ixgbe 0000:03:00.0: removed PHC on enp3s0f0 + for nic in '$nics' + ifconfig enp3s0f1 up + sleep 5 [ OK ] Started Crash recovery kernel arming. + ethtool enp3s0f1 + grep -q 'Link detected: yes' + command -v zypper + command -v apt-get + echo -e 'DEVICE=enp3s0f1\nBOOTPROTO=dhcp\nONBOOT=yes' + set +e + ifdown enp3s0f1 Starting Network Manager Script Dispatcher Service... Device 'enp3s0f1' successfully disconnected. + ifup enp3s0f1 [ OK ] Started Network Manager Script Dispatcher Service. Starting Hostname Service... [ OK ] Started Hostname Service. Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/2) + attempts=0 + ping -I enp3s0f1 -nq -c1 172.21.0.11 PING 172.21.0.11 (172.21.0.11) from 172.21.15.123 enp3s0f1: 56(84) bytes of data. --- 172.21.0.11 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.420/0.420/0.420/0.000 ms + '[' 0 == 5 ']' + touch /.cephlab_net_configured + break + set +e + attempts=0 + myips= + '[' '' '!=' '' ']' + '[' 0 -ge 10 ']' ++ ip -4 addr ++ grep -oP '(?<=inet\s)\d+(\.\d+){3}' ++ grep -v '127.0.0.1\|127.0.1.1' + myips=172.21.15.123 + attempts=1 + sleep 1 + '[' 172.21.15.123 '!=' '' ']' + set -e + '[' -n 172.21.15.123 ']' + for ip in '$myips' + timeout 1s ping -I 172.21.15.123 -nq -c1 172.21.0.1 ++ dig +short -x 172.21.15.123 @172.21.0.1 ++ sed 's/\.com.*/\.com/g' + newhostname=smithi123.front.sepia.ceph.com + '[' -n smithi123.front.sepia.ceph.com ']' + hostname smithi123.front.sepia.ceph.com ++ hostname -d + newdomain=front.sepia.ceph.com ++ hostname -s + shorthostname=smithi123 + echo smithi123 + grep -q front.sepia.ceph.com /etc/hosts + sed -i 's/.*front.sepia.ceph.com.*/172.21.15.123 smithi123.front.sepia.ceph[ OK ] Started /etc/rc.d/rc.local Compatibility. Starting Wait for Plymouth Boot Screen to Quit... Starting Terminate Plymouth Boot Screen... CentOS Linux 7 (Core) Kernel 3.10.0-1062.4.1.el7.x86_64 on an x86_64 smithi123 login: [ 137.800458] SGI XFS with ACLs, security attributes, no debug enabled [ 137.854976] xor: automatically using best checksumming function: [ 137.870922] avx : 22144.000 MB/sec [ 137.899924] raid6: sse2x1 gen() 8441 MB/s [ 137.920926] raid6: sse2x2 gen() 11300 MB/s [ 137.941928] raid6: sse2x4 gen() 14109 MB/s [ 137.962930] raid6: avx2x1 gen() 20296 MB/s [ 137.983931] raid6: avx2x2 gen() 25656 MB/s [ 138.004933] raid6: avx2x4 gen() 29363 MB/s [ 138.009210] raid6: using algorithm avx2x4 gen() (29363 MB/s) [ 138.014880] raid6: using avx2x2 recovery algorithm [ 138.072556] Btrfs loaded, crc32c=crc32c-intel [ 138.095271] fuse init (API version 7.23) [ 138.358126] XFS (dm-1): Mounting V5 Filesystem [ 138.370016] XFS (dm-1): Ending clean mount [ 138.374179] SELinux: Context system_u:object_r:ceph_var_lib_t:s0 is not valid (left unmapped). [ 138.428065] XFS (dm-1): Unmounting Filesystem [ 138.451952] XFS (dm-0): Mounting V4 Filesystem [ 138.462061] XFS (dm-0): Ending clean mount [ 138.506086] XFS (dm-0): Unmounting Filesystem [ OK ] Started Show Plymouth Reboot Screen. [ OK ] Unmounted RPC Pipe File System. [ OK ] Stopped LVM2 PV scan on device 259:0. [ OK ] Removed slice system-lvm2\x2dpvscan.slice. [ OK ] Stopped Dynamic System Tuning Daemon. [ OK ] Stopped target Network. Stopping LSB: Bring up/down networking... [ OK ] Stopped Login Service. [ OK ] Stopped LSB: Bring up/down networking. [ OK ] Stopped Network Manager Wait Online. Stopping Network Manager... [ OK ] Stopped Network Manager. Stopping D-Bus System Message Bus... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped target Basic System. [ OK ] Stopped target Paths. [ OK ] Stopped Forward [ 140.325474] type=1305 audit(1574018045.894:396): audit_pid=0 old=8478 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 Password Requests to Wall Direct[ 140.338594] type=1131 audit(1574018045.907:397): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=auditd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' ory Watch. [[[ 140.361745] type=1131 audit(1574018045.930:398): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' 32m OK ] S[ 140.384840] type=1131 audit(1574018045.953:399): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=rhel-import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' topped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped Forward Password Req[ 140.417123] type=1131 audit(1574018045.985:400): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=rhel-readonly comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' uests to Plymouth Directory Watch. [ OK ] Stopped target Sockets. [ OK ] Closed RPCbind Server Activation Socket. [ OK ] Closed D-Bus System Message Bus Socket. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Local Encrypted Volumes. [ OK ] Stopped Setup Virtual Console. [ OK ] Stopped Update is Completed. Stopping Load/Save Random Seed... [ OK ] Stopped Rebuild Hardware Database. [ OK ] Stopped Apply Kernel Variables. Stopping Security Auditing Service... [ OK ] Stopped Rebuild Journal Catalog. [ OK ] Stopped Read and set NIS domainname from /etc/sysconfig/network. [ OK ] Stopped Load/Save Random Seed. [[ 140.509335] type=1131 audit(1574018046.078:401): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' OK ] Stopped Security Auditing Service. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped Import network configuration from initramfs. [ OK ] Stopped target Lo[ 140.534181] type=1131 audit(1574018046.103:402): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' cal File Systems. Unmounting Configuration File System... Unmounting /run/user/1000... [ OK ] Stopped Configure read-only root support. [ OK ] Unmounted Configuration File System. [ OK ] Unmounted /run/user/1000. [ OK ] Reached target Unmount All Filesystems. [ 140.574928] type=1131 audit(1574018046.143:403): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-readahead-collect comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Stopped target Swap. [ OK ] Stopped target Local File Systems (Pre). [ 140.627507] type=1131 audit(1574018046.196:404): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-readahead-replay comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Stopped Collect Read-Ahead Data. [ OK ] Stopped Replay Read-Ahead Data. [ OK ] Reached target Shutdown. [ 140.753728] watchdog: watchdog0: watchdog did not stop! [ 140.763139] systemd-shutdown[1]: Syncing filesystems and block devices. [ 140.845946] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 140.879167] systemd-journald[4357]: Received SIGTERM from PID 1 (systemd-shutdow). [ 140.886031] type=1106 audit(1574018046.447:405): pid=32525 uid=0 auid=1000 ses=4 subj=system_u:system_r:sshd_t:s0-s0:c0.c1023 msg='op=PAM:session_close grantors=pam_selinux,pam_loginuid,pam_selinux,pam_namespace,pam_keyinit,pam_keyinit,pam_limits,pam_unix,pam_lastlog acct="ubuntu" exe="/usr/sbin/sshd" hostname=teuthology.front.sepia.ceph.com addr=? terminal=ssh res=success' [ 140.930352] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 140.948042] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0 [ 140.956961] systemd-shutdown[1]: Unmounting file systems. [ 140.964392] systemd-shutdown[354]: Remounting '/' read-only in with options 'seclabel,data=ordered'. [ 141.065995] EXT4-fs (sda1): re-mounted. Opts: data=ordered [ 141.082574] systemd-shutdown[1]: All filesystems unmounted. [ 141.090664] systemd-shutdown[1]: Deactivating swaps. [ 141.097992] systemd-shutdown[1]: All swaps deactivated. [ 141.105433] systemd-shutdown[1]: Detaching loop devices. [ 141.124565] systemd-shutdown[1]: All loop devices detached. [ 141.132450] systemd-shutdown[1]: Detaching DM devices. [ 141.140262] systemd-shutdown[1]: Detaching DM 253:4. [ 141.158310] systemd-shutdown[1]: Detaching DM 253:3. [ 141.186327] systemd-shutdown[1]: Detaching DM 253:2. [ 141.205321] systemd-shutdown[1]: Detaching DM 253:1. [ 141.240319] systemd-shutdown[1]: Detaching DM 253:0. [ 141.260318] systemd-shutdown[1]: All DM devices detached. [ 141.404416] systemd-shutdown[1]: Syncing filesystems and block devices. [ 141.412764] systemd-shutdown[1]: Rebooting. [ 141.418641] kvm: exiting hardware virtualization [ 141.425453] sd 4:0:0:0: [sda] Synchronizing SCSI cache [ 143.684896] Restarting system. [ 143.689785] reboot: machine restart € € € Initializing Intel(R) Boot Agent XE v2.1.60 PXE 2.1 Build 088 (WfM 2.0)  Press Ctrl+S to enter the Setup Menu.                      Press Ctrl+S to enter the Setup Menu..  € €  PXE 2.1 Build 088 (WfM 2.0)  Press Ctrl+S to enter the Setup Menu.                      Initializing Intel(R) Boot Agent XE v2.1.60 Press Ctrl+S to enter the Setup Menu..  € € Initializing Intel(R) Boot Agent GE v1.5.13 PXE 2.1 Build 092 (WfM 2.0) Press Ctrl+S to enter the Setup Menu.                       Press Ctrl+S to enter the Setup Menu..  € € € €  Intel(R) Boot Agent XE v2.1.60 Copyright (C) 1997-2009, Intel Corporation  Initializing and establishing link...                     PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent. Intel(R) Boot Agent XE v2.1.60 Copyright (C) 1997-2009, Intel Corporation CLIENT MAC ADDR: 0C C4 7A 8F D3 F1 GUID: 00000000 0000 0000 0000 0CC47AD8DA6C DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ GATEWAY IP: 172.21.15.254 PXE->EB: !PXE at 96D3:0070, entry point at 96D3:0106  UNDI code segment 96D3:3E70, data segment 8F94:73F0 (574-619kB)  UNDI device is PCI 03:00.1, type DIX+802.3  574kB free base memory after PXE unload iPXE initialising devices... CLIENT IP: 172.21.15.123 MASK: 255.255.240.0 DHCP IP: 172.21.0.10 iPXE initialising devices...ok iPXE 1.0.0+ (1b67a) -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS HTTP HTTPS iSCSI TFTP VLAN AoE ELF MBOOT PXE bzImage Menu PXEXT Configuring (net0 0c:c4:7a:8f:d3:f1)... Intel(R) Boot Agent XE v2.1.60 Copyright (C) 1997-2009, Intel Corporation  PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent.  Intel(R) Boot Agent XE v2.1.60 Copyright (C) 1997-2009, Intel Corporation  CLIENT MAC ADDR: 0C C4 7A 8F D3 F1 GUID: 00000000 0000 0000 0000 0CC47AD8DA6C CLIENT IP: 172.21.15.123 MASK: 255.255.240.0 DHCP IP: 172.21.0.10 GATEWAY IP: 172.21.15.254 PXE->EB: !PXE at 96D3:0070, entry point at 96D3:0106  UNDI code segment 96D3:3E70, data segment 8F94:73F0 (574-619kB)  UNDI device is PCI 03:00.1, type DIX+802.3  574kB free base memory after PXE unload iPXE initialising devices...ok  Configuring (net0 0c:c4:7a:8f:d3:f1).... Configuring (net0 0c:c4:7a:8f:d3:f1)..... PXE-E61: Media test failure, check cable  [?25lUse the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt.   CentOS Linux (3.10.0-1062.4.3.el7.x86_64) 7 (Core)  CentOS Linux (3.10.0-1062.4.1.el7.x86_64) 7 (Core)  CentOS Linux (3.10.0-957.el7.x86_64) 7 (Core)  CentOS Linux (0-rescue-a1739c9c60b14f0891126d2e603bb003) 7 (Core)              The selected entry will be started automatically in 5s.    CentOS Linux (3.10.0-1062.4.3.el7.x86_64) 7 (Core)   CentOS Linux (3.10.0-1062.4.1.el7.x86_64) 7 (Core)  CentOS Linux (3.10.0-957.el7.x86_64) 7 (Core)  CentOS Linux (0-rescue-a1739c9c60b14f0891126d2e603bb003) 7 (Core)           The selected entry will be started automatically in 4s.   Use the * and * keys to change the selection.  Press 'e' to edit the selected item, or 'c' for a command prompt.  The selected entry will be started automatically in 4s.    The selected entry will be started automatically in 3s.  The selected entry will be started automatically in 3s.  The selected entry will be started automatically in 2s.  The selected entry will be started automatically in 2s.  The selected entry will be started automatically in 1s.  The selected entry will be started automatically in 1s.  The selected entry will be started automatically in 0s. [?25h       Probing EDD (ed [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Linux version 3.10.0-1062.4.3.el7.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 4.8.5 20150623 (Red Hat 4.8.5-39) (GCC) ) #1 SMP Wed Nov 13 23:58:53 UTC 2019 [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-1062.4.3.el7.x86_64 root=UUID=60ab4ba9-cdc2-4668-aaad-a5769fd8ef67 ro crashkernel=auto console=ttyS1,115200 console=tty0 console=ttyS1,115200 [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008bbff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078ec6fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078f76000-0x00000000798affff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000798b0000-0x0000000079d4cfff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079d4d000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0 12/17/2015 [ 0.000000] e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000 [ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WP UC- UC [ 0.000000] e820: last_pfn = 0x78ec7 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fda20-0x000fda2f] mapped at [ffffffffff200a20] [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x35c6c000-0x36e2dfff] [ 0.000000] Early table checksum verification disabled [ 0.000000] ACPI: RSDP 00000000000f0580 00024 (v02 SUPERM) [ 0.000000] ACPI: XSDT 00000000798b0098 000B4 (v01 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 00000000798e35b0 0010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 00000000798b01e8 333C4 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.000000] ACPI: FACS 0000000079d4bf80 00040 [ 0.000000] ACPI: APIC 00000000798e36c0 000C8 (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 00000000798e3788 00044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 00000000798e37d0 0009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: SPMI 00000000798e3870 00040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.000000] ACPI: MCFG 00000000798e38b0 0003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.000000] ACPI: UEFI 00000000798e38f0 00042 (v01 SUPERM SMCI--MB 01072009 00000000) [ 0.000000] ACPI: HPET 00000000798e3938 00038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.000000] ACPI: WDDT 00000000798e3970 00040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.000000] ACPI: SSDT 00000000798e39b0 1717F (v02 SUPERM PmMgt 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 00000000798fab30 0264C (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.000000] ACPI: SSDT 00000000798fd180 00064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.000000] ACPI: PRAD 00000000798fd1e8 00102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.000000] ACPI: DMAR 00000000798fd2f0 000BC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.000000] ACPI: HEST 00000000798fd3b0 0027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 00000000798fd630 00030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 00000000798fd660 00230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 00000000798fd890 00130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x87ffd9000-0x87fffffff] [ 0.000000] Reserving 162MB of memory at 688MB for crashkernel (System RAM: 32654MB) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x00001000-0x00ffffff] [ 0.000000] DMA32 [mem 0x01000000-0xffffffff] [ 0.000000] Normal [mem 0x100000000-0x87fffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x00001000-0x0008afff] [ 0.000000] node 0: [mem 0x00100000-0x78ec6fff] [ 0.000000] node 0: [mem 0x100000000-0x87fffffff] [ 0.000000] Initmem setup node 0 [mem 0x00001000-0x87fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb000020 (or later) [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x0008b000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x78ec7000-0x78f75fff] [ 0.000000] PM: Registered nosave memory: [mem 0x78f76000-0x798affff] [ 0.000000] PM: Registered nosave memory: [mem 0x798b0000-0x79d4cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x79d4d000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] e820: [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] setup_percpu: NR_CPUS:5120 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 38 pages/cpu @ffffa13dffc00000 s118784 r8192 d28672 u262144 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8228864 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.10.0-1062.4.3.el7.x86_64 root=UUID=60ab4ba9-cdc2-4668-aaad-a5769fd8ef67 ro crashkernel=auto console=ttyS1,115200 console=tty0 console=ttyS1,115200 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100 [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form [ 0.000000] Memory: 3828168k/35651584k available (7760k kernel code, 2213564k absent, 795064k reserved, 5967k data, 1984k init) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] x86/pti: Unmapping kernel while in userspace [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=5120 to nr_cpu_ids=8. [ 0.000000] NR_IRQS:327936 nr_irqs:896 0 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS1] enabled [ 0.000000] allocated 134217728 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3499.779 MHz processor [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.55 BogoMIPS (lpj=3499779) [ 0.011073] pid_max: default: 32768 minimum: 301 [ 0.015921] Security Framework initialized [ 0.020233] SELinux: Initializing. [ 0.023944] Yama: becoming mindful. [ 0.029203] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.041150] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.050574] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.057695] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.065582] Initializing cgroup subsys memory [ 0.070158] Initializing cgroup subsys devices [ 0.074818] Initializing cgroup subsys freezer [ 0.079481] Initializing cgroup subsys net_cls [ 0.084143] Initializing cgroup subsys blkio [ 0.088623] Initializing cgroup subsys perf_event [ 0.093539] Initializing cgroup subsys hugetlb [ 0.098202] Initializing cgroup subsys pids [ 0.102604] Initializing cgroup subsys net_prio [ 0.108066] CPU0: Thermal monitoring enabled (TM1) [ 0.113114] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.118641] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0 [ 0.124258] tlb_flushall_shift: 6 [ 0.127791] FEATURE SPEC_CTRL Not Present [ 0.132012] FEATURE IBPB_SUPPORT Not Present [ 0.136495] Spectre V1 : Mitigation: Load fences, usercopy/swapgs barriers and __user pointer sanitization [ 0.146588] Spectre V2 : Vulnerable: Retpoline without IBPB [ 0.152377] Speculative Store Bypass: Vulnerable [ 0.157224] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.163966] TAA: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.171505] Freeing SMP alternatives: 28k freed [ 0.177575] ACPI: Core revision 20130517 [ 0.200096] ACPI: All ACPI Tables successfully acquired [ 0.205824] ftrace: allocating 29557 entries in 116 pages [ 0.229938] DMAR: Host address width 46 [ 0.233995] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 0.239533] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de [ 0.247904] DMAR: RMRR base: 0x0000007ba75000 end: 0x0000007ba84fff [ 0.254385] DMAR: ATSR flags: 0x0 [ 0.257915] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 0.264399] DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 0 [ 0.270965] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 0.277535] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 0.283150] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.290183] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.298685] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.304207] IRQ remapping doesn't support X2APIC mode, disable x2apic. [ 0.311453] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.327668] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz (fam: 06, model: 4f, stepping: 01) [ 0.439368] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.450385] ... version: 3 [ 0.454609] ... bit width: 48 [ 0.458916] ... generic registers: 4 [ 0.463139] ... value mask: 0000ffffffffffff [ 0.468661] ... max period: 00007fffffffffff [ 0.474183] ... fixed-purpose events: 3 [ 0.478402] ... event mask: 000000070000000f [ 0.484828] smpboot: Booting Node 0, Processors #1[ 0.491281] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter. #2 #3 #4 #5 #6 #7 OK [ 0.510835] Brought up 8 CPUs [ 0.514017] smpboot: Max logical packages: 1 [ 0.518498] smpboot: Total of 8 processors activated (55996.46 BogoMIPS) [ 0.621612] node 0 initialised, 7203697 pages in 88ms [ 0.627017] devtmpfs: initialized [ 0.630589] x86/mm: Memory block size: 128MB [ 0.637994] EVM: security.selinux [ 0.641523] EVM: security.ima [ 0.644700] EVM: security.capability [ 0.648533] PM: Registering ACPI NVS region [mem 0x798b0000-0x79d4cfff] (4837376 bytes) [ 0.657833] atomic64 test passed for x86-64 platform with CX8 and with SSE [ 0.664924] pinctrl core: initialized pinctrl subsystem [ 0.670398] RTC time: 19:15:42, date: 11/17/19 [ 0.675104] NET: Registered protocol family 16 [ 0.683845] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.691775] ACPI: bus type PCI registered [ 0.695998] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.702691] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.712357] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.719362] PCI: Using configuration type 1 for base access [ 0.728624] ACPI: Added _OSI(Module Device) [ 0.733017] ACPI: Added _OSI(Processor Device) [ 0.737672] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.742587] ACPI: Added _OSI(Processor Aggregator Device) [ 0.748197] ACPI: Added _OSI(Linux-Dell-Video) [ 0.770831] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.824372] ACPI: Dynamic OEM Table Load: [ 0.828755] ACPI: PRAD (null) 00102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.851269] ACPI: Interpreter enabled [ 0.855148] ACPI: (supports S0 S4 S5) [ 0.859021] ACPI: Using IOAPIC for interrupt routing [ 0.864215] HEST: Enabling Firmware First mode for corrected errors. [ 0.870847] HEST: Table parsing has been initialized. [ 0.876110] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.885624] ACPI: GPE 0x24 active on init [ 0.889995] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.917287] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.923421] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.933313] acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug AER] [ 0.941400] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 0.949414] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.957982] PCI host bridge to bus 0000:ff [ 0.962288] pci_bus 0000:ff: root bus resource [bus ff] [ 1.034161] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 1.040554] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 1.049275] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER] [ 1.057097] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 1.065116] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 1.073837] PCI host bridge to bus 0000:00 [ 1.078148] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 1.085148] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 1.092150] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 1.099995] pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f window] [ 1.107837] pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f window] [ 1.115683] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 1.123526] pci_bus 0000:00: root bus resource [bus 00-fe] [ 1.129414] pci 0000:00:01.0: System wakeup disabled by ACPI [ 1.135395] pci 0000:00:02.0: System wakeup disabled by ACPI [ 1.141374] pci 0000:00:03.0: System wakeup disabled by ACPI [ 1.148756] pci 0000:00:14.0: System wakeup disabled by ACPI [ 1.155064] pci 0000:00:1a.0: System wakeup disabled by ACPI [ 1.161058] pci 0000:00:1c.0: System wakeup disabled by ACPI [ 1.167060] pci 0000:00:1c.2: System wakeup disabled by ACPI [ 1.173057] pci 0000:00:1c.4: System wakeup disabled by ACPI [ 1.179096] pci 0000:00:1d.0: System wakeup disabled by ACPI [ 1.185463] acpiphp: Slot [1] registered [ 1.189611] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.194986] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.200356] pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 1.210988] pci 0000:03:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 1.221700] pci 0000:03:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x8 link at 0000:00:03.0 (capable of 63.008 Gb/s with 8 GT/s x8 link) [ 1.235999] pci 0000:03:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 1.246629] pci 0000:03:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 1.257368] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.262586] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 1.269791] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 1.275539] pci 0000:05:00.0: PCI bridge to [bus 06] [ 1.280987] pci 0000:07:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 1.291540] pci 0000:07:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 1.302129] pci 0000:07:00.0: 16.000 Gb/s available PCIe bandwidth, limited by 5 GT/s x4 link at 0000:00:1c.4 (capable of 31.504 Gb/s with 8 GT/s x4 link) [ 1.316533] pci 0000:07:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 1.327087] pci 0000:07:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 1.339775] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 1.344963] pci 0000:00:1c.4: bridge has subordinate 07 but max busn 08 [ 1.352378] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 1.360590] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 1.368807] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 1.376773] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 1.384735] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.394374] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.404022] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.413669] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 1.423475] vgaarb: device added: PCI:0000:06:00.0,decodes=io+mem,owns=io+mem,locks=none [ 1.431918] vgaarb: loaded [ 1.434829] vgaarb: bridge control possible 0000:06:00.0 [ 1.440404] SCSI subsystem initialized [ 1.444378] ACPI: bus type USB registered [ 1.448606] usbcore: registered new interface driver usbfs [ 1.454309] usbcore: registered new interface driver hub [ 1.459852] usbcore: registered new device driver usb [ 1.465170] EDAC MC: Ver: 3.0.0 [ 1.468668] PCI: Using ACPI for IRQ routing [ 1.478382] NetLabel: Initializing [ 1.481991] NetLabel: domain hash size = 128 [ 1.486551] NetLabel: protocols = UNLABELED CIPSOv4 [ 1.491738] NetLabel: unlabeled traffic allowed by default [ 1.497566] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.504650] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.512714] amd_nb: Cannot enumerate AMD northbridges [ 1.517986] Switched to clocksource hpet [ 1.525409] pnp: PnP ACPI init [ 1.528685] ACPI: bus type PNP registered [ 1.533180] system 00:01: [io 0x0500-0x057f] has been reserved [ 1.539310] system 00:01: [io 0x0400-0x047f] could not be reserved [ 1.545792] system 00:01: [io 0x0580-0x059f] has been reserved [ 1.551918] system 00:01: [io 0x0600-0x061f] has been reserved [ 1.558046] system 00:01: [io 0x0880-0x0883] has been reserved [ 1.564174] system 00:01: [io 0x0800-0x081f] has been reserved [ 1.570302] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 1.577127] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 1.583956] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 1.590777] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.597608] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 1.604437] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 1.611257] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 1.618221] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 1.624356] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 1.630489] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 1.636618] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 1.642746] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 1.649531] pnp: PnP ACPI: found 5 devices [ 1.653838] ACPI: bus type PNP unregistered [ 1.664010] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 1.672201] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.677382] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.682553] pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 1.689555] pci 0000:03:00.0: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 1.697480] pci 0000:03:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 1.705750] pci 0000:03:00.0: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 1.713758] pci 0000:03:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 1.722114] pci 0000:03:00.1: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 1.730036] pci 0000:03:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 1.738306] pci 0000:03:00.1: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 1.746321] pci 0000:03:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 1.754680] pci 0000:03:00.0: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 1.762608] pci 0000:03:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 1.770876] pci 0000:03:00.0: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 1.778884] pci 0000:03:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 1.787242] pci 0000:03:00.1: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 1.799034] pci 0000:03:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 1.807307] pci 0000:03:00.1: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 1.815323] pci 0000:03:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 1.823678] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.828850] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 1.835155] pci 0000:00:03.0: bridge window [mem 0xfb200000-0xfb2fffff] [ 1.842150] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbefffff 64bit pref] [ 1.850247] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 1.855433] pci 0000:05:00.0: PCI bridge to [bus 06] [ 1.860610] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 1.866916] pci 0000:05:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 1.873925] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 1.879366] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.885670] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff] [ 1.892686] pci 0000:07:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 1.900793] pci 0000:07:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 1.908983] pci 0000:07:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 1.917087] pci 0000:07:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 1.925277] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 1.930451] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 1.936755] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 1.943752] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 1.951855] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 1.961304] NET: Registered protocol family 2 [ 1.966086] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.974103] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.981127] TCP: Hash tables configured (established 262144 bind 65536) [ 1.987979] TCP: reno registered [ 1.991451] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 1.997917] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 2.004837] NET: Registered protocol family 1 [ 2.040247] Unpacking initramfs... [ 2.212591] Freeing initrd memory: 18184k freed [ 2.219346] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 2.226007] software IO TLB [mem 0x74ec7000-0x78ec7000] (64MB) mapped at [ffffa135f4ec7000-ffffa135f8ec6fff] [ 2.236282] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 2.244556] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 2.250513] RAPL PMU: hw unit of domain package 2^-14 Joules [ 2.256381] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 2.262648] sha1_ssse3: Using AVX2 optimized SHA-1 implementation [ 2.268984] sha256_ssse3: Using AVX2 optimized SHA-256 implementation [ 2.275850] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 2.282344] Initialise system trusted keyring [ 2.286929] audit: initializing netlink socket (disabled) [ 2.292550] type=2000 audit(1574018141.647:1): initialized [ 2.316163] HugeTLB registered 1 GB page size, pre-allocated 0 pages [ 2.322726] HugeTLB registered 2 MB page size, pre-allocated 0 pages [ 2.330179] zpool: loaded [ 2.333015] zbud: loaded [ 2.336031] VFS: Disk quotas dquot_6.5.2 [ 2.340186] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 2.346963] msgmni has been set to 32768 [ 2.351136] Key type big_key registered [ 2.355617] NET: Registered protocol family 38 [ 2.360271] Key type asymmetric registered [ 2.364576] Asymmetric key parser 'x509' registered [ 2.369683] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 2.377457] io scheduler noop registered [ 2.381588] io scheduler deadline registered (default) [ 2.386954] io scheduler cfq registered [ 2.391002] io scheduler mq-deadline registered [ 2.395746] io scheduler kyber registered [ 2.400702] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt [ 2.407889] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt [ 2.415063] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt [ 2.421811] pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt [ 2.428987] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt [ 2.435722] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt [ 2.442467] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt [ 2.449656] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt [ 2.456828] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt [ 2.463570] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt [ 2.470314] pcieport 0000:00:1c.4: Signaling PME through PCIe PME interrupt [ 2.477489] pci 0000:07:00.0: Signaling PME through PCIe PME interrupt [ 2.484227] pci 0000:07:00.1: Signaling PME through PCIe PME interrupt [ 2.490992] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 2.496778] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 2.503688] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.510904] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0 [ 2.519447] ACPI: Power Button [PWRB] [ 2.523341] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.531098] ACPI: Power Button [PWRF] [ 2.534990] ACPI: Requesting acpi_cpufreq [ 2.540275] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.548115] pstore: Registered erst as persistent store backend [ 2.554375] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.562178] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.589241] 00:03: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 2.615640] 00:04: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A [ 2.621722] Non-volatile memory driver v1.3 [ 2.626139] Linux agpgart interface v0.103 [ 2.630594] crash memory driver: version 1.1 [ 2.635155] rdac: device handler registered [ 2.639579] hp_sw: device handler registered [ 2.644066] emc: device handler registered [ 2.648397] alua: device handler registered [ 2.652821] libphy: Fixed MDIO Bus: probed [ 2.657156] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.663897] ehci-pci: EHCI PCI platform driver [ 2.668648] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.674113] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.681869] ehci-pci 0000:00:1a.0: debug port 2 [ 2.690501] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb434000 [ 2.702068] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.708054] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10 [ 2.716670] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.724253] usb usb1: Product: EHCI Host Controller [ 2.729337] usb usb1: Manufacturer: Linux 3.10.0-1062.4.3.el7.x86_64 ehci_hcd [ 2.736684] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.741583] hub 1-0:1.0: USB hub found [ 2.745547] hub 1-0:1.0: 2 ports detected [ 2.749908] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.755369] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.763126] ehci-pci 0000:00:1d.0: debug port 2 [ 2.771771] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb433000 [ 2.783072] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.789050] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10 [ 2.797668] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.805249] usb usb2: Product: EHCI Host Controller [ 2.810334] usb usb2: Manufacturer: Linux 3.10.0-1062.4.3.el7.x86_64 ehci_hcd [ 2.817682] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.822571] hub 2-0:1.0: USB hub found [ 2.826535] hub 2-0:1.0: 2 ports detected [ 2.830834] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.837229] ohci-pci: OHCI PCI platform driver [ 2.841898] uhci_hcd: USB Universal Host Controller Interface driver [ 2.848556] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.854038] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.862841] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 2.872440] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 3.10 [ 2.881057] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.888639] usb usb3: Product: xHCI Host Controller [ 2.893724] usb usb3: Manufacturer: Linux 3.10.0-1062.4.3.el7.x86_64 xhci-hcd [ 2.901074] usb usb3: SerialNumber: 0000:00:14.0 [ 2.905964] hub 3-0:1.0: USB hub found [ 2.909933] hub 3-0:1.0: 15 ports detected [ 2.915702] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.921172] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.928928] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.935536] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 3.10 [ 2.944157] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.951738] usb usb4: Product: xHCI Host Controller [ 2.956824] usb usb4: Manufacturer: Linux 3.10.0-1062.4.3.el7.x86_64 xhci-hcd [ 2.964169] usb usb4: SerialNumber: 0000:00:14.0 [ 2.969074] hub 4-0:1.0: USB hub found [ 2.973055] hub 4-0:1.0: 6 ports detected [ 2.978018] usbcore: registered new interface driver usbserial_generic [ 2.984759] usbserial: USB Serial support registered for generic [ 2.991004] i8042: PNP: No PS/2 controller found. Probing ports directly. [ 3.080092] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 3.147095] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 3.216440] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05 [ 3.224980] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.232461] hub 1-1:1.0: USB hub found [ 3.236566] hub 1-1:1.0: 6 ports detected [ 3.263106] tsc: Refined TSC clocksource calibration: 3499.996 MHz [ 4.035828] i8042: No controller found [ 4.039799] Switched to clocksource tsc [ 4.039832] mousedev: PS/2 mouse device common for all mice [ 4.039920] rtc_cmos 00:00: RTC can wake from S4 [ 4.040055] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 4.040088] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 4.040117] usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05 [ 4.040118] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.040127] intel_pstate: Intel P-state driver initializing [ 4.040255] hub 2-1:1.0: USB hub found [ 4.040366] hub 2-1:1.0: 8 ports detected [ 4.044120] cpuidle: using governor menu [ 4.044504] hidraw: raw HID events driver (C) Jiri Kosina [ 4.044707] usbcore: registered new interface driver usbhid [ 4.044707] usbhid: USB HID core driver [ 4.044974] drop_monitor: Initializing network drop monitor service [ 4.045081] TCP: cubic registered [ 4.045087] Initializing XFRM netlink socket [ 4.045281] NET: Registered protocol family 10 [ 4.045570] NET: Registered protocol family 17 [ 4.045579] mpls_gso: MPLS GSO support [ 4.049768] intel_rdt: Intel RDT L3 allocation detected [ 4.049769] intel_rdt: Intel RDT L3DATA allocation detected [ 4.049769] intel_rdt: Intel RDT L3CODE allocation detected [ 4.049770] intel_rdt: Intel RDT L3 monitoring detected [ 4.049777] mce: Using 22 MCE banks [ 4.049837] microcode: sig=0x406f1, pf=0x1, revision=0xb000010 [ 4.054581] microcode: Microcode Update Driver: v2.01 , Peter Oruba [ 4.054692] Loading compiled-in X.509 certificates [ 4.054712] Loaded X.509 cert 'CentOS Linux kpatch signing key: ea0413152cde1d98ebdca3fe6f0230904c9ef717' [ 4.054726] Loaded X.509 cert 'CentOS Linux Driver update signing key: 7f421ee0ab69461574bb358861dbe77762a4201b' [ 4.055164] Loaded X.509 cert 'CentOS Linux kernel signing key: 3f59ae1577d58723184f6dbab18ad5f59de41d39' [ 4.055180] registered taskstats version 1 [ 4.057635] Key type trusted registered [ 4.059762] Key type encrypted registered [ 4.059782] IMA: No TPM chip found, activating TPM-bypass! (rc=-19) [ 4.060049] Magic number: 11:45:294 [ 4.060055] misc hpet: hash matches [ 4.060064] tty tty27: hash matches [ 4.060162] memory memory156: hash matches [ 4.060821] rtc_cmos 00:00: setting system clock to 2019-11-17 19:15:45 UTC (1574018145) [ 4.158198] usb 3-12: new high-speed USB device number 2 using xhci_hcd [ 4.274666] Freeing unused kernel memory: 1984k freed [ 4.280439] Write protecting the kernel read-only data: 12288k [ 4.284422] usb 3-12: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 4.284426] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.284814] hub 3-12:1.0: USB hub found [ 4.284895] hub 3-12:1.0: 4 ports detected [ 4.312858] Freeing unused kernel memory: 420k freed [ 4.320014] Freeing unused kernel memory: 552k freed [ 4.330441] random: systemd: uninitialized urandom read (16 bytes read) [ 4.337865] random: systemd: uninitialized urandom read (16 bytes read) [ 4.344732] random: systemd: uninitialized urandom read (16 bytes read) [ 4.353602] systemd[1]: systemd 219 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 -SECCOMP +BLKID +ELFUTILS +KMOD +IDN) [ 4.372596] systemd[1]: Detected architecture x86-64. [ 4.377874] systemd[1]: Running in initial RAM disk. Welcome to CentOS Linux 7 (Core) dracut-033-554.el7 (Initramfs)! [ 4.391347] systemd[1]: Set hostname to . [ 4.439058] random: systemd: uninitialized urandom read (16 bytes read) [ 4.445931] random: systemd: uninitialized urandom read (16 bytes read) [ 4.452810] random: systemd: uninitialized urandom read (16 bytes read) [ 4.459726] random: systemd: uninitialized urandom read (16 bytes read) [ 4.467275] random: systemd: uninitialized urandom read (16 bytes read) [ 4.474302] random: systemd: uninitialized urandom read (16 bytes read) [ 4.481476] random: systemd: uninitialized urandom re[ 4.492468] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 4.501298] systemd[1]: Reached target Timers. [ OK ] Reached target Timers. [ 4.510299] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. [ 4.522573] systemd[1]: Created slice Root Slice. [ OK ] Created slice Root Slice. [ 4.532365] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 4.542357] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 4.553440] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 4.564047] systemd[1]: Starting dracut cmdli] usb 3-12.1: ne 3 using xhci_hcdline hook... [ 4.581759] systemd[1]: Starting Journal Service... Starting Journal Service... [ 4.591283] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 4.600840] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 4.611753] systemd[1]: Starting Create list of required static device nodes for the current kernel... Starting Create list of required st... nodes for the current kernel... [ 4.630667] systemd[1]: Starting Setup Virtual Console... Starting Setup Virtual Console... [ 4.642349] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 4.658253] systemd[1]: Reached target Sockets. [ OK ] Reached target Sockets. [ 4.667528] systemd[1]: Start[32m OK [ 4.673516] usb 3-12.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 ] Started Journa[ 4.682689] usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 l Service. [ OK ] Started dracut cmdline hook. [ 4.6put: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/input/input2 [ OK ] Started Apply Kernel Variables. [ OK ] Started Create list of required sta...ce nodes for the current kernel. [ OK ] Started Setup Virtual Console. Starting Create Static Device Nodes in /dev... Starting dracut pre-udev hook... [ OK ] Started Create Static Device Nodes in /dev. [ 4.758421] hneric 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-12.1/input0 [ 4.771369] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/input/input3 [ 4.781793] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-12.1/input1 [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... Mounting Configuration File System... [ OK ] Mounted Configuration File System. [ OK ] Started udev Coldplug all Devices. Starting dracut initqueue hook... Starting Show Plymouth Boot Screen... [ OK ] Reached target System Initialization. [ OK ] Started Show Plymouth Boot Screen. [ OK ] Reached target Paths. [ OK ] Started Forward Password Requests to Plymouth Directory Watch. [ OK ] Reached target Basic System. [ 5.113956] dca service started, version 1.12.1 [ 5.120586] pps_core: LinuxPPS API ver. 1 registered [ 5.125790] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 5.138135] nvme nvme0: pci function 0000:02:00.0 [ 5.144829] PTP clock support registered [ 5.165078] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 5.173550] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst [ 5.183341] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 5.188492] scsi host0: ahci [ 5.188589] scsi host1: ahci [ 5.188663] scsi host2: ahci [ 5.199832] igb: Copyright (c) 2007-2014 Intel Corporation. [ 5.205788] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k-rh7.7 [ 5.214343] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 5.220487] scsi host3: ahci [ 5.223736] ata1: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438100 irq 35 [ 5.231524] ata2: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438180 irq 35 [ 5.239290] ata3: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438200 irq 35 [ 5.247081] ata4: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438280 irq 35 [ 5.255177] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 5.263754] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 5.264592] igb 0000:07:00.0: added PHC on eth0 [ 5.264592] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 5.264594] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:d8:da:6c [ 5.264671] igb 0000:07:00.0: eth0: PBA No: 050B00-000 [ 5.264672] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 5.316573] scsi host4: ahci [ 5.320844] scsi host5: ahci [ 5.323885] igb 0000:07:00.1: added PHC on eth1 [ 5.323887] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection [ 5.323889] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:d8:da:6d [ 5.323978] igb 0000:07:00.1: eth1: PBA No: 050B00-000 [ 5.323980] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 5.359931] scsi host6: ahci [ 5.363908] [drm] Using P2A bridge for configuration [ 5.365197] scsi host7: ahci [ 5.368042] scsi host8: ahci [ 5.368929] scsi host9: ahci [ 5.368980] ata5: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432100 irq 54 [ 5.368983] ata6: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432180 irq 54 [ 5.368985] ata7: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432200 irq 54 %G[ 5.368987] ata8: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432280 irq 54 [ 5.368989] ata9: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432300 irq 54 [ 5.368991] ata10: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432380 irq 54 [ 5.409536] [drm] AST 2400 detected [ 5.409552] [drm] Analog VGA only [ 5.409576] [drm] dram MCLK=408 Mhz type=1 bus_width=16 size=01000000 [ 5.410991] [TTM] Zone kernel: Available graphics memory: 16332062 kiB [ 5.410992] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 5.410992] [TTM] Initializing pool allocator [ 5.410998] [TTM] Initializing DMA pool allocator [ 5.464409] fbcon: astdrmfb (fb0) is primary device [ 5.507512] Console: switching to colour frame buffer device 128x48 [ 5.541176] ast 0000:06:00.0: fb0: astdrmfb frame buffer device [ 5.548276] [drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on minor 0 [ 5.561399] ata4: SATA link down (SStatus 0 SControl 300) [ 5.561474] ata2: SATA link down (SStatus 0 SControl 300) [ 5.561491] ata3: SATA link down (SStatus 0 SControl 300) [ 5.565303] ata1: SATA link down (SStatus 0 SControl 300) %G[ 5.673307] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 5.679564] ata6: SATA link down (SStatus 0 SControl 300) [ 5.685024] ata7: SATA link down (SStatus 0 SControl 300) [ 5.690490] ata10: SATA link down (SStatus 0 SControl 300) [ 5.696048] ata9: SATA link down (SStatus 0 SControl 300) [ 5.701522] ata8: SATA link down (SStatus 0 SControl 300) [ 5.707094] ata5.00: ATA-9: ST1000NM0033-9ZM173, SN06, max UDMA/133 [ 5.713392] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 5.721620] ata5.00: configured for UDMA/133 [ 5.726116] scsi 4:0:0:0: Direct-Access ATA ST1000NM0033-9ZM SN06 PQ: 0 ANSI: 5 [ 5.767287] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 5.775063] sd 4:0:0:0: [sda] Write Protect i779926] sd 4:0:0: enabled, read esn't support DPO or FUA [ 5.796997] sda: sda1 [ 5.799541] sd 4:0:0:0: [sda] Attached SCSI disk [ 5.898708] random: fast init done [ OK ] Found device ST1000NM0033-9ZM173 1. Starting File System Check on /dev/...9-cdc2-4668-aaad-a5769fd8ef67... [ OK ] Started File System Check on /dev/d...ba9-cdc2-4668-aaad-a5769fd8ef67. [ 6.346194] ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 6.357913] ixgbe 0000:03:00.0: PCI Express bandwidth of 32GT/s available [ 6.366016] ixgbe 0000:03:00.0: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%) [ 6.374528] ixgbe 0000:03:00.0: MAC: 2, PHY: 1, PBA No: 0210FF-0FF [ 6.381924] ixgbe 0000:03:00.0: 0c:c4:7a:8f:d3:f0 [ 6.391553] ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection [ 6.399287] libphy: ixgbe-mdio: probed [ 6.555201] ixgbe 0000:03:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 6.566860] ixgbe 0000:03:00.1: PCI Express bandwidth of 32GT/s available [ 6.574906] ixgbe 0000:03:00.1: (Speed:5.0GT/s, Width: x8, Encoding Loss:20%) [ 6.583365] ixgbe 0000:03:00.1: MAC: 2, PHY: 14, SFP+: 4, PBA No: 0210FF-0FF [ 6.591561] ixgbe 0000:03:00.1: 0c:c4:7a:8f:d3:f1 [ 6.601097] ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection [ 6.608735] libphy: ixgbe-mdio: probed [ OK ] Started dracut initqueue hook. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Mounting /sysroot... [ 6.833633] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ OK ] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting dracut pre-pivot and cleanup hook... [ OK ] Started dracut pre-pivot and cleanup hook. Starting Cleaning Up and Shutting Down Daemons... [ OK ] Stopped target Timers. Starting Plymouth switch root service... [ OK ] Stopped Cleaning Up and Shutting Down Daemons. [ OK ] Stopped dracut pre-pivot and cleanup hook. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped dracut initqueue hook. [ OK ] Stopped target Initrd Default Target. [ OK ] Stopped target Basic System. [ OK ] Stopped target System Initialization. [ OK ] Stopped target Swap. [ OK ] Stopped Apply Kernel Variables. Stopping udev Kernel Device Manager... [ OK ] Stopped udev Coldplug all Devices. [ OK ] Stopped [ 7.142014] systemd-journald[136]: Received SIGTERM from PID 1 (systemd). target Local File Systems. [ OK ] Stopped target Sockets. [ OK ] Stopped target Slices. [ OK ] Stopped target Paths. [ OK ] Stopped udev Kernel Device Manager. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create list of required sta...ce nodes for the current kernel. [ OK ] Stopped dracut pre-udev hook. [ OK ] Stopped dracut cmdline hook. [ OK ] Closed udev Control Socket. [ OK ] Closed udev Kernel Socket. Starting Cleanup udevd DB... [ OK ] Started Cleanup udevd DB. [ OK ] Reached target Switch Root. [ OK ] Started Plymouth switch root service. Starting Switch Root... [ 7.421958] random: crng init done [ 7.612491] type=1403 audit(1574018149.051:2): policy loaded auid=4294967295 ses=4294967295 [ 7.627663] systemd[1]: Successfully loaded SELinux policy in 236.825ms. [ 7.846658] ip_tables: (C) 2000-2006 Netfilter Core Team [ 7.853166] systemd[1]: Inserted module 'ip_tables' [ 7.895482] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 32.670ms. Welcome to CentOS Linux 7 (Core)! [ OK ] Stopped Switch Root. [ OK ] Stopped Journal Service. Starting Journal Service... [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 metadata daemon socket. Starting Create list of required st... nodes for the current kernel... [ OK ] Created slice system-selinux\x2dpol...grate\x2dlocal\x2dchanges.slice. Starting Replay Read-Ahead Data... [ OK ] Listening on Delayed Shutdown Socket. [ OK ] Created slice system-getty.slice. [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. Mounting Debug File System... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target RPC Port Mapper. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Stopped target Switch Root. [ OK ] Stopped target Initrd File Systems. [ OK ] Stopped target Initrd Root File System. [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Monitoring of LVM2 mirrors... dmeventd or progress polling... [ OK ] Reached target Swap. [ OK ] Set up automount Arbitrary Executab...ats File System Automount Point. Mounting POSIX Message Queue File System... Mounting Huge Pages File System... Starting Read and set NIS domainname from /etc/sysconfig/network... [ OK ] Listening on udev Kernel Socket. Starting Collect Read-Ahead Data... [ OK ] Listening on udev Control Socket. [ OK ] Started Journal Service. [ OK ] Started Replay Read-Ahead Data. [ OK ] Started Collect Read-Ahead Data. [ OK ] Started Create list of required sta...ce nodes for the current kernel. Starting Remount Root and Kernel File Systems... Starting Create Static Device Nodes in /dev... Starting Apply Kernel Variables... [ OK ] Started Apply Kernel Variables. [ OK ] Mounted Huge Pages File System. [ 8.835840] EXT4-fs (sda1): re-mounted. Opts: (null) [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Debug File System. [ OK ] Started Read and set NIS domainname from /etc/sysconfig/network. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started LVM2 metadata daemon. Starting udev Kernel Device Manager... Starting Flush Journal to Persistent Storage... Starting udev Coldplug all Devices... Starting Configure read-only root support... [ 8.929153] systemd-journald[4392]: Received request to flush runtime journal from PID 1 [ OK ] Started udev Kernel Device Manager. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Coldplug all Devices. Starting udev Wait for Complete Device Initialization... [ OK ] Started Configure read-only root support. Starting Load/Save Random Seed... [ OK ] Started Load/Save Random Seed. [ 9.307287] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.321406] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 9.328906] igb 0000:07:00.0: DCA enabled [ 9.333891] igb 0000:07:00.1: DCA enabled [ 10.629749] power_meter ACPI000D:00: Found ACPI power meter. [ 10.636368] IPMI message handler: version 39.2 [ 10.636491] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 10.673747] ipmi device interface [ 10.685462] ipmi_si: IPMI System Interface driver [ 10.691149] ipmi_si dmi-ipmi-si.0: probing via SMBIOS [ 10.697050] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 10.705155] ipmi_si: Adding SMBIOS-specified kcs state machine [ 10.712174] ipmi_si IPI0001:00: probing via ACPI [ 10.717303] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 10.724676] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 10.748575] ipmi_si: Adding ACPI-specified kcs state machine [ 10.755169] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ 10.799573] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 10.821239] ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0833, dev_id: 0x20) [ 10.850496] ipmi_si IPI0001:00: IPMI kcs interface initialized [ OK ] Created slice system-lvm2\x2dpvscan.slice. Starting LVM2 PV scan on device 259:0... [ 10.865215] ipmi_ssif: IPMI SSIF Interface driver [ 10.911819] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 10.936433] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ OK ] Found device /dev/ttyS1. [ 11.010595] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 11.048427] cryptd: max_cpu_qlen set to 1000 [ 11.076865] AVX2 version of gcm_enc/dec engaged. [ 11.076866] AES CTR mode by8 optimization enabled [ 11.099065] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni) [ 11.108059] alg: No test for __generic-gcm-aes-aesni (__driver-generic-gcm-aes-aesni) %G%G[ 11.209119] iTCO_vendor_support: vendor-support=0 [ 11.216419] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 11.222648] iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460) [ 11.231578] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 11.362134] intel_rapl: Found RAPL domain package [ 11.367433] intel_rapl: Found RAPL domain dram [ 11.372447] intel_rapl: DRAM domain energy unit 15300pj [ 11.478091] EDAC MC0: Giving out device to 'sb_edac.c' 'Broadwell SrcID#0_Ha#0': DEV 0000:ff:12.0 [ 11.478091] EDAC sbridge: Ver: 1.1.2 [ OK ] Started udev Wait for Complete Device Initialization. Starting Activation of DM RAID sets... [ 11.651096] device-mapper: uevent: version 1.0.3 [ 11.651151] device-mapper: ioctl: 4.37.1-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ OK ] Started Monitoring of LVM2 mirrors,...ng dmeventd or progress polling. [ OK ] Reached target Local File Systems (Pre). [ OK ] Started Activation of DM RAID sets. [ OK ] Reached target Local File Systems. Starting Preprocess NFS configuration... Starting Tell Plymouth To Write Out Runtime Data... Starting Import network configuration from initramfs... [ OK ] Reached target Local Encrypted Volumes. [ OK ] Started Preprocess NFS configuration. [ OK ] Started Import network configuration from initramfs. Starting Create Volatile Files and Directories... [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started LVM2 PV scan on device 259:0. [ OK ] Started Create Volatile Files and Directories. Mounting RPC Pipe File System... Starting Security Auditing Service... [ 12.053873] type=1305 audit(1574018153.492:3): audit_pid=8542 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 [ 12.096435] RPC: Registered named UNIX socket transport module. [ 12.103128] RPC: Registered udp transport module. [ 12.108538] RPC: Registered tcp transport module. [ 12.113912] RPC: Registered tcp NFSv4.1 backchannel transport module. [ OK ] Mounted RPC Pipe File System. [ OK ] Reached target rpc_pipefs.target. [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Reached target Timers. [ OK ] Listening on RPCbind Server Activation Socket. Starting RPC bind service... [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started libstoragemgmt plug-in server daemon. [ OK ] Started D-Bus System Message Bus. Starting Kernel Samepage Merging... Starting Authorization Manager... Starting GSSAPI Proxy Daemon... Starting Dump dmesg to /var/log/dmesg... [ OK ] Started ABRT Automated Bug Reporting Tool. [ OK ] Started ABRT kernel log watcher. Starting NTP client/server... [ OK ] Started Hardware RNG Entropy Gatherer Daemon. Starting Self Monitoring and Reporting Technology (SMART) Daemon... Starting Install ABRT coredump hook... Starting Resets System Activity Logs... Starting VDO volume services... Starting Network Manager... Starting Login Service... [ OK ] Started irqbalance daemon. Starting Load CPU microcode update... [ OK ] Started RPC bind service. [ OK ] Started Kernel Samepage Merging. [ OK ] Started GSSAPI Proxy Daemon. [ OK ] Started Dump dmesg to /var/log/dmesg. [ OK ] Started Install ABRT coredump hook. [ OK ] Started Resets System Activity Logs. [ OK ] Reached target NFS client services. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting Permit User Sessions... Starting Kernel Samepage Merging (KSM) Tuning Daemon... [ OK ] Started Permit User Sessions. [ OK ] Started Kernel Samepage Merging (KSM) Tuning Daemon. [ OK ] Started Login Service. [ OK ] Started Authorization Manager. [ OK ] Started Command Scheduler. [ OK ] Started Job spooling tools. [ OK ] Started Load CPU microcode update. [ OK ] Started VDO volume services. [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. [ OK ] Started NTP client/server. [ OK ] Started Network Manager. Starting Network Manager Wait Online... Starting Hostname Service... [ OK ] Started Hostname Service. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ 13.504948] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 13.564580] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 13.574005] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready [ 13.633369] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready [ 13.641756] IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready [ 13.685686] ixgbe 0000:03:00.0: registered PHC device on enp3s0f0 [ 13.793649] IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready [ 13.803343] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready [ 13.848890] ixgbe 0000:03:00.1: registered PHC device on enp3s0f1 [ 13.956754] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready [ 14.062589] ixgbe 0000:03:00.1 enp3s0f1: detected SFP+: 4 [ 14.262877] ixgbe 0000:03:00.1 enp3s0f1: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 14.271860] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f1: link becomes ready [ OK ] Started Network Manager Wait Online. Starting LSB: Bring up/down networking... [ OK ] Started LSB: Bring up/down networking. [ OK ] Reached target Network. Starting OpenSSH server daemon... [ OK ] Started Nagios Remote Program Executor. Starting Dynamic System Tuning Daemon... Starting /etc/rc.d/rc.local Compatibility... + '[' '!' -f /.cephlab_net_configured ']' + set +e + attempts=0 + myips= + '[' '' '!=' '' ']' + '[' 0 -ge 10 ']' ++ ip -4 addr ++ grep -oP '(?<=inet\s)\d+(\.\d+){3}' ++ grep -v '127.0.0.1\|127.0.1.1' + myips=172.21.15.123 + attempts=1 + sleep 1 Starting Postfix Mail Transport Agent... [ OK ] Reached target Network is Online. Starting Notify NFS peers of a restart... Starting Crash recovery kernel arming... Starting System Logging Service... [ OK ] Started OpenSSH server daemon. [ OK ] Started Notify NFS peers of a restart. [ OK ] Started System Logging Service. [ OK ] Started Dynamic System Tuning Daemon. [ OK ] Started Postfix Mail Transport Agent. + '[' 172.21.15.123 '!=' '' ']' + set -e + '[' -n 172.21.15.123 ']' + for ip in '$myips' + timeout 1s ping -I 172.21.15.123 -nq -c1 172.21.0.1 ++ dig +short -x 172.21.15.123 @172.21.0.1 ++ sed 's/\.com.*/\.com/g' + newhostname=smithi123.front.sepia.ceph.com + '[' -n smithi123.front.sepia.ceph.com ']' + hostname smithi123.front.sepia.ceph.com ++ hostname -d + newdomain=front.sepia.ceph.com ++ hostname -s + shorthostname=smithi123 + echo smithi123 + grep -q front.sepia.ceph.com /etc/hosts + sed -i[ OK ] Started /etc/rc.d/rc.local Compatibility. Starting Terminate Plymouth Boot Screen... Starting Wait for Plymouth Boot Screen to Quit... CentOS Linux 7 (Core) Kernel 3.10.0-1062.4.3.el7.x86_64 on an x86_64 smithi123 login: [ 43.821401] kgdb: Registered I/O driver kgdboc. [ 214.811466] SELinux: Converting 2343 SID table entries... [ 224.891712] SELinux: Converting 2343 SID table entries... [ 273.597932] SELinux: Converting 2357 SID table entries... [ 309.752938] SGI XFS with ACLs, security attributes, no debug enabled [ 309.764763] XFS (dm-0): Mounting V4 Filesystem [ 309.773836] XFS (dm-0): Ending clean mount [ 378.017211] SELinux: Converting 2374 SID table entries... [ 972.374213] XFS (dm-1): Mounting V5 Filesystem [ 972.431396] XFS (dm-1): Ending clean mount [ 973.415745] XFS (dm-4): Mounting V5 Filesystem [ 973.446695] XFS (dm-4): Ending clean mount [ 974.410335] XFS (dm-3): Mounting V5 Filesystem [ 974.464639] XFS (dm-3): Ending clean mount [ 975.434706] XFS (dm-2): Mounting V5 Filesystem [ 975.460253] XFS (dm-2): Ending clean mount [ 7196.171116] perf: interrupt took too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 79000 [ 9702.357792] perf: interrupt took too long (3132 > 3126), lowering kernel.perf_event_max_sample_rate to 63000