[Enter `^Ec?' for help] [spying] € € €  e t XE v2.1.60 PXE 2.1 Build 088 (WfM 2.0)  Press Ctrl+S to enter the Setup Menu.                      Initializing Intel(R) Boot Agent XE v2.1.60 Press Ctrl+S to enter the Setup Menu..    €  t XE v2.1.60 PXE 2.1 Build 088 (WfM 2.0)  Press Ctrl+S to enter the Setup Menu.                      Initializing Intel(R) Boot Agent XE v2.1.60 Press Ctrl+S to enter the Setup Menu..    €  t GE v1.5.13 PXE 2.1 Build 092 (WfM 2.0) Press Ctrl+S to enter the Setup Menu.                       Initializing Intel(R) Boot Agent GE v1.5.13 Press Ctrl+S to enter the Setup Menu..    € € €  Intel(R) Boot Agent XE v2.1.60 Copyright (C) 1997-2009, Intel Corporation  CLIENT MAC ADDR: 0C C4 7A BD 15 60 GUID: 00000000 0000 0000 0000 0CC47A6BFECC DHCP.-                    DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP...| DHCP.../ DHCP...- DHCP...\ DHCP...| DHCP.../ DHCP...- DHCP...\ DHCP...| DHCP.../ DHCP...- DHCP...\ DHCP...| DHCP.../ DHCP...- DHCP...\ DHCP...| DHCP.../ DHCP...- CLIENT IP: 172.21.15.60 MASK: 255.255.240.0 DHCP IP: 172.21.0.10 GATEWAY IP: 172.21.15.254 PXE->EB: !PXE at 96D3:0070, entry point at 96D3:0106  UNDI code segment 96D3:3E70, data segment 8F94:73F0 (574-619kB)  UNDI device is PCI 01:00.0, type DIX+802.3  574kB free base memory after PXE unload iPXE initialising devices... iPXE initialising devices...ok iPXE 1.20.1+ (g4bd0) -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS FTP HTTP HTTPS iSCSI NFS TFTP VLAN AoE ELF MBOOT PXE bzImage Menu PXEXT Configuring (net0 0c:c4:7a:bd:15:60)... Configuring (net0 0c:c4:7a:bd:15:60).... Configuring (net0 0c:c4:7a:bd:15:60)..... Configuring (net0 0c:c4:7a:bd:15:60)...... Configuring (net0 0c:c4:7a:bd:15:60)....... Configuring (net0 0c:c4:7a:bd:15:60)........ Configuring (net0 0c:c4:7a:bd:15:60)........ ok Received DHCP answer on interface net0 http://172.21.15.200/fog/service/ipxe/boot.php... ok bzImage... ok      [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0x3a (or later) Starting syslogd: OK Starting klogd: OK Running sysctl: OK Populating /dev using udev: done Saving random seed: OK Starting haveged: haveged: listening socket at 3 OK Starting enp1s0f0 interface and waiting for the link to come up udhcpc: started, v1.31.1 udhcpc: sending discover udhcpc: sending discover udhcpc: sending select for 172.21.15.60 udhcpc: lease of 172.21.15.60 obtained, lease time 43200 deleting routers adding dns 172.21.0.1 adding dns 172.21.0.2 ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 Starting sshd: OK * Running post init scripts.........................Done ================================== === ==== ===== ==== === ========= == === == === === ======== ==== == ==== === === ======== ==== == ========= === ==== ==== == ========= === ======== ==== == === === === ======== ==== == ==== === === ========= == === == === === ========== ===== ==== ================================== ===== Free Opensource Ghost ====== ================================== ============ Credits ============= = https://fogproject.org/Credits = ================================== == Released under GPL Version 3 == ================================== Version: 1.5.9 Init Version: 20200906 * Verifying network interface configuration.........Done * Checking Operating System.........................Linux * Checking CPU Cores................................8 * Send method.......................................NFS * Attempting to check in............................Done * Mounting File System..............................Done * Checking Mounted File System......................Done * Checking img variable is set......................Done * Attempting to send inventory......................Done * Using Image: smithi_rhel_8.6 * Looking for Hard Disk.............................Done * Using Disk: /dev/sda * Enabling write cache..............................Enabled * Using Hard Disk: /dev/sda * Preparing Partition layout * Erasing current MBR/GPT Tables....................Done * Restoring Partition Tables and GRUB (MBR).........Done * Inserting Extended partitions (Original)..........Done * Attempting to expand/fill partitions..............Done +--------------------------------+ | Attempting to deploy image | +--------------------------------+ | Using Partclone | +--------------------------------+ * Processing Partition: /dev/sda1 (1) * Imaging using Partclone (gzip) (B)0[?7h [?1l>Partclone v0.3.13 http://partclone.org Starting to restore image (-) to device (/dev/sda1) note: Storage Location 172.21.15.200:/images/, Image name smithi_rhel_8.6 Calculating bitmap... Please wait... done! File system: EXTFS Device size: 5.7 GB = 1383027 Blocks Space in use: 4.5 GB = 1086845 Blocks Free Space: 1.2 GB = 296182 Blocks Block size: 4096 Byte Elapsed: 00:00:01, Remaining: 00:01:39, Completed: 1.00%, 0.00byte/min, current block: 0, total block: 1383027, Complete: 0.00% Elapsed: 00:00:01, Remaining: 00:00:12, Completed: 7.21%, 19.25GB/min, current block: 78336, total block: 1383027, Complete: 5.66% Elapsed: 00:00:02, Remaining: 00:00:12, Completed: 13.61%, 18.18GB/min, current block: 147968, total block: 1383027, Complete: 10.70% Elapsed: 00:00:03, Remaining: 00:00:11, Completed: 20.89%, 18.60GB/min, current block: 227072, total block: 1383027, Complete: 16.42% Elapsed: 00:00:04, Remaining: 00:00:10, Completed: 26.85%, 17.93GB/min, current block: 291840, total block: 1383027, Complete: 21.10% Elapsed: 00:00:05, Remaining: 00:00:10, Completed: 32.55%, 17.39GB/min, current block: 353792, total block: 1383027, Complete: 25.58% Elapsed: 00:00:06, Remaining: 00:00:08, Completed: 40.18%, 17.89GB/min, current block: 436736, total block: 1383027, Complete: 31.58% Elapsed: 00:00:07, Remaining: 00:00:07, Completed: 48.15%, 18.37GB/min, current block: 523264, total block: 1383027, Complete: 37.83% Elapsed: 00:00:08, Remaining: 00:00:06, Completed: 56.08%, 18.72GB/min, current block: 609536, total block: 1383027, Complete: 44.07% Elapsed: 00:00:09, Remaining: 00:00:04, Completed: 66.68%, 19.79GB/min, current block: 724736, total block: 1383027, Complete: 52.40% Elapsed: 00:00:10, Remaining: 00:00:02, Completed: 77.00%, 20.57GB/min, current block: 836864, total block: 1383027, Complete: 60.51% Elapsed: 00:00:11, Remaining: 00:00:01, Completed: 84.70%, 20.57GB/min, current block: 920576, total block: 1383027, Complete: 66.56% Elapsed: 00:00:12, Remaining: 00:00:01, Completed: 91.79%, 20.43GB/min, current block: 997632, total block: 1383027, Complete: 72.13% Elapsed: 00:00:13, Remaining: 00:00:00, Completed: 99.02%, 20.35GB/min, current block: 1082452, total block: 1383027, Complete: 78.27% Elapsed: 00:00:14, Remaining: 00:00:00, Completed: 100.00%, Rate: 19.08GB/min, current block: 1344000, total block: 1383027, Complete: 100.00% Total Time: 00:00:14, Ave. Rate: 19.1GB/min, 100.00% completed! Syncing... OK! Partclone successfully restored the image (-) to the device (/dev/sda1) Cloned successfully. * Resizing extfs volume (/dev/sda1).................Done * Resetting UUIDs for /dev/sda * Resetting swap systems * Skipping partition restore (MBR Only) * Stopping FOG Status Reporter......................Done * Task Complete * Updating Database.................................Done * Rebooting system as task is complete reboot: Restarting system € € €  el(R t XE v2.1.60 PXE 2.1 Build 088 (WfM 2.0)  Press Ctrl+S to enter the Setup Menu.                      Initializing Intel(R) Boot Agent XE v2.1.60 Press Ctrl+S to enter the Setup Menu..    €  t XE v2.1.60 PXE 2.1 Build 088 (WfM 2.0)  Press Ctrl+S to enter the Setup Menu.                      Initializing Intel(R) Boot Agent XE v2.1.60 Press Ctrl+S to enter the Setup Menu..    €   PXE 2.1 Build 092 (WfM 2.0) Press Ctrl+S to enter the Setup Menu.                       Initializing Intel(R) Boot Agent GE v1.5.13 Press Ctrl+S to enter the Setup Menu..    € € €  Intel(R) Boot Agent XE v2.1.60 Copyright (C) 1997-2009, Intel Corporation  CLIENT MAC ADDR: 0C C4 7A BD 15 60 GUID: 00000000 0000 0000 0000 0CC47A6BFECC DHCP./                    DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP...\ DHCP...| DHCP.../ DHCP...- DHCP...\ DHCP...| DHCP.../ DHCP...- DHCP...\ DHCP...| DHCP.../ DHCP...- DHCP...\ DHCP...| DHCP.../ DHCP...- DHCP...\ DHCP...|  21.15.60 255.255.240.0 DHCP IP: 172.21.0.10 GATEWAY IP: 172.21.15.254 PXE->EB: !PXE at 96D3:0070, entry point at 96D3:0106  UNDI code segment 96D3:3E70, data segment 8F94:73F0 (574-619kB)  UNDI device is PCI 01:00.0, type DIX+802.3  574kB free base memory after PXE unload iPXE initialising devices... CLIENT IP: 172.21.15.60 MASK: 255.255.240.0 DHCP IP: 172.21.0.10 iPXE initialising devices...ok iPXE 1.20.1+ (g4bd0) -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS FTP HTTP HTTPS iSCSI NFS TFTP VLAN AoE ELF MBOOT PXE bzImage Menu PXEXT Configuring (net0 0c:c4:7a:bd:15:60)... Configuring (net0 0c:c4:7a:bd:15:60).... Configuring (net0 0c:c4:7a:bd:15:60)..... Configuring (net0 0c:c4:7a:bd:15:60)...... Configuring (net0 0c:c4:7a:bd:15:60)....... Configuring (net0 0c:c4:7a:bd:15:60)........ Configuring (net0 0c:c4:7a:bd:15:60)......... ok .   [?25lUse the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt.   Red Hat Enterprise Linux (4.18.0-372.9.1.el8.x86_64) 8.6 (Ootpa)  Red Hat Enterprise Linux (0-rescue-5a84457b7b52416e95d47d02e2e4a60f) 8.6>               Red Hat Enterprise Linux (0-rescue-5a84457b7b52416e95d47d02e2e4a60f) 8.6*  The selected entry will be started automatically in 5s.              Use the * and * keys to change the selection.  Press 'e' to edit the selected item, or 'c' for a command prompt.  The selected entry will be started automatically in 5s.   Red Hat Enterprise Linux (4.18.0-372.9.1.el8.x86_64) 8.6 (Ootpa)   The selected entry will be started automatically in 4s.  The selected entry will be started automatically in 4s.  The selected entry will be started automatically in 3s.  The selected entry will be started automatically in 3s.  The selected entry will be started automatically in 2s.  The selected entry will be started automatically in 2s.  The selected entry will be started automatically in 1s.  The selected entry will be started automatically in 1s.  The selected entry will be started automatically in 0s. [?25h     [ 0.000000] microcode: microcode updated early to revision 0x49, date = 2021-08-11 [ 0.000000] Linux version 4.18.0-372.9.1.el8.x86_64 (mockbuild@x86-vm-09.build.eng.bos.redhat.com) (gcc version 8.5.0 20210514 (Red Hat 8.5.0-10) (GCC)) #1 SMP Fri Apr 15 22:12:19 EDT 2022 [ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/boot/vmlinuz-4.18.0-372.9.1.el8.x86_64 root=UUID=78886b72-f581-4b1d-8578-0d8161fd4ca1 ro crashkernel=auto console=ttyS1,115200 console=tty0 console=ttyS1,115200 [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] signal: max sigframe size: 1776 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008bbff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000079208fff] usable [ 0.000000] BIOS-e820: [mem 0x000000007920c000-0x0000000079821fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000079822000-0x000000007996afff] usable [ 0.000000] BIOS-e820: [mem 0x000000007996b000-0x0000000079e00fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079e01000-0x000000007bd4cfff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007bd4d000-0x000000007bd4dfff] usable [ 0.000000] BIOS-e820: [mem 0x000000007bd4e000-0x000000007bdd3fff] reserved [ 0.000000] BIOS-e820: [mem 0x000000007bdd4000-0x000000007bf50fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 1.0c 09/07/2015 [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] tsc: Detected 3500.138 MHz processor [ 0.000000] last_pfn = 0x880000 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0x7bf51 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fd910-0x000fd91f] [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x3484f000-0x3641ffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F0530 000024 (v02 SUPERM) [ 0.000000] ACPI: XSDT 0x0000000079A7F0A0 0000C4 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x0000000079AAC298 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x0000000079A7F200 02D091 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.000000] ACPI: FACS 0x0000000079DFEF80 000040 [ 0.000000] ACPI: APIC 0x0000000079AAC3A8 0000C8 (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x0000000079AAC470 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x0000000079AAC4B8 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: SPMI 0x0000000079AAC558 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.000000] ACPI: MCFG 0x0000000079AAC598 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.000000] ACPI: UEFI 0x0000000079AAC5D8 000042 (v01 SUPERM SMCI--MB 01072009 00000000) [ 0.000000] ACPI: BDAT 0x0000000079AAC620 000030 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.000000] ACPI: HPET 0x0000000079AAC650 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.000000] ACPI: PMCT 0x0000000079AAC688 000064 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.000000] ACPI: WDDT 0x0000000079AAC6F0 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.000000] ACPI: SSDT 0x0000000079AAC730 00EDE7 (v01 SUPERM PmMgt 00000001 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000079ABB518 002117 (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.000000] ACPI: SSDT 0x0000000079ABD630 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.000000] ACPI: PRAD 0x0000000079ABD698 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.000000] ACPI: DMAR 0x0000000079ABD7A0 0000BC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.000000] ACPI: HEST 0x0000000079ABD860 00027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 0x0000000079ABDAE0 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 0x0000000079ABDB10 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 0x0000000079ABDD40 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: Reserving FACP table memory at [mem 0x79aac298-0x79aac3a3] [ 0.000000] ACPI: Reserving DSDT table memory at [mem 0x79a7f200-0x79aac290] [ 0.000000] ACPI: Reserving FACS table memory at [mem 0x79dfef80-0x79dfefbf] [ 0.000000] ACPI: Reserving APIC table memory at [mem 0x79aac3a8-0x79aac46f] [ 0.000000] ACPI: Reserving FPDT table memory at [mem 0x79aac470-0x79aac4b3] [ 0.000000] ACPI: Reserving FIDT table memory at [mem 0x79aac4b8-0x79aac553] [ 0.000000] ACPI: Reserving SPMI table memory at [mem 0x79aac558-0x79aac597] [ 0.000000] ACPI: Reserving MCFG table memory at [mem 0x79aac598-0x79aac5d3] [ 0.000000] ACPI: Reserving UEFI table memory at [mem 0x79aac5d8-0x79aac619] [ 0.000000] ACPI: Reserving BDAT table memory at [mem 0x79aac620-0x79aac64f] [ 0.000000] ACPI: Reserving HPET table memory at [mem 0x79aac650-0x79aac687] [ 0.000000] ACPI: Reserving PMCT table memory at [mem 0x79aac688-0x79aac6eb] [ 0.000000] ACPI: Reserving WDDT table memory at [mem 0x79aac6f0-0x79aac72f] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0x79aac730-0x79abb516] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0x79abb518-0x79abd62e] [ 0.000000] ACPI: Reserving SSDT table memory at [mem 0x79abd630-0x79abd693] [ 0.000000] ACPI: Reserving PRAD table memory at [mem 0x79abd698-0x79abd799] [ 0.000000] ACPI: Reserving DMAR table memory at [mem 0x79abd7a0-0x79abd85b] [ 0.000000] ACPI: Reserving HEST table memory at [mem 0x79abd860-0x79abdadb] [ 0.000000] ACPI: Reserving BERT table memory at [mem 0x79abdae0-0x79abdb0f] [ 0.000000] ACPI: Reserving ERST table memory at [mem 0x79abdb10-0x79abdd3f] [ 0.000000] ACPI: Reserving EINJ table memory at [mem 0x79abdd40-0x79abde6f] [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x87ffd5000-0x87fffffff] [ 0.000000] Using crashkernel=auto, the size chosen is a best effort estimation. [ 0.000000] Reserving 192MB of memory at 1744MB for crashkernel (System RAM: 32660MB) [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000087fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008afff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000079208fff] [ 0.000000] node 0: [mem 0x0000000079822000-0x000000007996afff] [ 0.000000] node 0: [mem 0x000000007bd4d000-0x000000007bd4dfff] [ 0.000000] node 0: [mem 0x000000007bdd4000-0x000000007bf50fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000087fffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 27558 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 9, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008b000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x79209000-0x7920bfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7920c000-0x79821fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7996b000-0x79e00fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79e01000-0x7bd4cfff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bd4e000-0x7bdd3fff] [ 0.000000] PM: Registered nosave memory: [mem 0x7bf51000-0x7fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x80000000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 55 pages/cpu s188416 r8192 d28672 u262144 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8230268 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/boot/vmlinuz-4.18.0-372.9.1.el8.x86_64 root=UUID=78886b72-f581-4b1d-8578-0d8161fd4ca1 ro crashkernel=auto console=ttyS1,115200 console=tty0 console=ttyS1,115200 [ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://catalog.redhat.com. [ 0.000000] Memory: 1826812K/33444200K available (12293K kernel code, 5865K rwdata, 8292K rodata, 2520K init, 14348K bss, 869508K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39999 entries in 157 pages [ 0.000000] ftrace: allocated 157 pages with 5 groups [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 896, preallocated irqs: 16 [ 0.000000] random: crng done (trusting CPU's manufacturer) [ 0.001000] Console: colour VGA+ 80x25 [ 0.001000] printk: console [tty0] enabled [ 0.001000] printk: console [ttyS1] enabled [ 0.001000] ACPI: Core revision 20210604 [ 0.001000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.001000] APIC: Switch to symmetric I/O mode setup [ 0.001004] DMAR: Host address width 46 [ 0.002001] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 0.003004] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de [ 0.004001] DMAR: RMRR base: 0x0000007bac6000 end: 0x0000007bad4fff [ 0.005002] DMAR: ATSR flags: 0x0 [ 0.006001] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 0.007002] DMAR-IR: IOAPIC id 8 under DRHD base 0xfbffc000 IOMMU 0 [ 0.008001] DMAR-IR: IOAPIC id 9 under DRHD base 0xfbffc000 IOMMU 0 [ 0.009001] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 0.010001] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.010002] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.013143] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.014000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.014492] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.019001] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x3273d35abf6, max_idle_ns: 440795222605 ns [ 0.020001] Calibrating delay loop (skipped), value calculated using timer frequency.. 7000.27 BogoMIPS (lpj=3500138) [ 0.021000] pid_max: default: 32768 minimum: 301 [ 0.022022] LSM: Security Framework initializing [ 0.023007] Yama: becoming mindful. [ 0.024004] SELinux: Initializing. [ 0.025022] LSM support for eBPF active [ 0.031347] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc) [ 0.034875] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, vmalloc) [ 0.035080] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, vmalloc) [ 0.036073] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, vmalloc) [ 0.037237] CPU0: Thermal monitoring enabled (TM1) [ 0.038055] process: using mwait in idle threads [ 0.039001] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024 [ 0.040000] Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4 [ 0.041000] FEATURE SPEC_CTRL Present [ 0.042000] FEATURE IBPB_SUPPORT Present [ 0.043000] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.044001] Spectre V2 : Mitigation: Retpolines [ 0.045000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.046000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.047002] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.048000] Spectre V2 : User space: Mitigation: STIBP via seccomp and prctl [ 0.049000] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.050002] MDS: Mitigation: Clear CPU buffers [ 0.051203] Freeing SMP alternatives memory: 36K [ 0.053819] smpboot: Estimated ratio of average max frequency by base frequency (times 1024): 1053 [ 0.054007] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1620 v3 @ 3.50GHz (family: 0x6, model: 0x3f, stepping: 0x2) [ 0.055108] Performance Events: PEBS fmt2+, Haswell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.056001] ... version: 3 [ 0.057000] ... bit width: 48 [ 0.058000] ... generic registers: 4 [ 0.059000] ... value mask: 0000ffffffffffff [ 0.060000] ... max period: 00007fffffffffff [ 0.061000] ... fixed-purpose events: 3 [ 0.062000] ... event mask: 000000070000000f [ 0.063030] rcu: Hierarchical SRCU implementation. [ 0.064872] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.065018] smp: Bringing up secondary CPUs ... [ 0.066073] x86: Booting SMP configuration: [ 0.067002] .... node #0, CPUs: #1 #2 #3 #4 [ 0.075372] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.077102] #5 #6 #7 [ 0.079113] smp: Brought up 1 node, 8 CPUs [ 0.081002] smpboot: Max logical packages: 1 [ 0.082000] smpboot: Total of 8 processors activated (56002.20 BogoMIPS) [ 0.122022] node 0 deferred pages initialised in 38ms [ 0.128857] devtmpfs: initialized [ 0.129040] x86/mm: Memory block size: 128MB [ 0.131497] ACPI: PM: Registering ACPI NVS region [mem 0x7996b000-0x79e00fff] (4808704 bytes) [ 0.132100] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.133009] futex hash table entries: 2048 (order: 5, 131072 bytes, vmalloc) [ 0.134067] pinctrl core: initialized pinctrl subsystem [ 0.135129] NET: Registered protocol family 16 [ 0.136079] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations [ 0.137009] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.138011] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.146020] audit: initializing netlink subsys (disabled) [ 0.151010] audit: type=2000 audit(1689785265.151:1): state=initialized audit_enabled=0 res=1 [ 0.160003] cpuidle: using governor menu [ 0.164039] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.171001] ACPI: bus type PCI registered [ 0.176001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.182047] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.191002] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.198011] PCI: Using configuration type 1 for base access [ 0.204023] core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on [ 0.212171] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.219002] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.226024] cryptd: max_cpu_qlen set to 1000 [ 0.230068] ACPI: Added _OSI(Module Device) [ 0.234002] ACPI: Added _OSI(Processor Device) [ 0.239001] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.244000] ACPI: Added _OSI(Processor Aggregator Device) [ 0.249001] ACPI: Added _OSI(Linux-Dell-Video) [ 0.254000] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.259001] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.286955] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.295977] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.305124] ACPI: Dynamic OEM Table Load: [ 0.311550] ACPI: Interpreter enabled [ 0.312013] ACPI: PM: (supports S0 S4 S5) [ 0.313001] ACPI: Using IOAPIC for interrupt routing [ 0.314025] HEST: Enabling Firmware First mode for corrected errors. [ 0.315083] HEST: Table parsing has been initialized. [ 0.316002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.317502] ACPI: Enabled 6 GPEs in block 00 to 3F [ 0.334266] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.335004] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.337514] acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 0.338770] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 0.339001] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.340032] PCI host bridge to bus 0000:ff [ 0.341001] pci_bus 0000:ff: root bus resource [bus ff] [ 0.342010] pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000 [ 0.343067] pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100 [ 0.344055] pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100 [ 0.345055] pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000 [ 0.346053] pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000 [ 0.347054] pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000 [ 0.348054] pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000 [ 0.349055] pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000 [ 0.350054] pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000 [ 0.351053] pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000 [ 0.352052] pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000 [ 0.353052] pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000 [ 0.354053] pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000 [ 0.355053] pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100 [ 0.356052] pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000 [ 0.357051] pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100 [ 0.358051] pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000 [ 0.359051] pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000 [ 0.360056] pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100 [ 0.361058] pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000 [ 0.362056] pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000 [ 0.363057] pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000 [ 0.364056] pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000 [ 0.365056] pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000 [ 0.366056] pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000 [ 0.367056] pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000 [ 0.368056] pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000 [ 0.369056] pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000 [ 0.370058] pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000 [ 0.371057] pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000 [ 0.372056] pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000 [ 0.373056] pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000 [ 0.374054] pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000 [ 0.375054] pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000 [ 0.376054] pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000 [ 0.377054] pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000 [ 0.378056] pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000 [ 0.379058] pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000 [ 0.380056] pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000 [ 0.381058] pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000 [ 0.382056] pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000 [ 0.383054] pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000 [ 0.384053] pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000 [ 0.385056] pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000 [ 0.386054] pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000 [ 0.387055] pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000 [ 0.388053] pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000 [ 0.389056] pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000 [ 0.390054] pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000 [ 0.391054] pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000 [ 0.392054] pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000 [ 0.393025] pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000 [ 0.394054] pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000 [ 0.395054] pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000 [ 0.396146] acpi LNXCPU:08: Entry not well-defined, consider updating BIOS [ 0.397853] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.398003] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3] [ 0.399407] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR DPC] [ 0.400791] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 0.401001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.402455] PCI host bridge to bus 0000:00 [ 0.403001] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window] [ 0.404000] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window] [ 0.405000] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window] [ 0.406000] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.407000] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.408000] pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f window] [ 0.409000] pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f window] [ 0.410000] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.411000] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.412013] pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000 [ 0.413155] pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400 [ 0.414068] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 0.415115] pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400 [ 0.416066] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold [ 0.417112] pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400 [ 0.418066] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 0.419104] pci 0000:00:04.0: [8086:2f20] type 00 class 0x088000 [ 0.420018] pci 0000:00:04.0: reg 0x10: [mem 0xfb42c000-0xfb42ffff 64bit] [ 0.421140] pci 0000:00:04.1: [8086:2f21] type 00 class 0x088000 [ 0.422018] pci 0000:00:04.1: reg 0x10: [mem 0xfb428000-0xfb42bfff 64bit] [ 0.423138] pci 0000:00:04.2: [8086:2f22] type 00 class 0x088000 [ 0.424018] pci 0000:00:04.2: reg 0x10: [mem 0xfb424000-0xfb427fff 64bit] [ 0.425139] pci 0000:00:04.3: [8086:2f23] type 00 class 0x088000 [ 0.426017] pci 0000:00:04.3: reg 0x10: [mem 0xfb420000-0xfb423fff 64bit] [ 0.427138] pci 0000:00:04.4: [8086:2f24] type 00 class 0x088000 [ 0.428018] pci 0000:00:04.4: reg 0x10: [mem 0xfb41c000-0xfb41ffff 64bit] [ 0.429137] pci 0000:00:04.5: [8086:2f25] type 00 class 0x088000 [ 0.430017] pci 0000:00:04.5: reg 0x10: [mem 0xfb418000-0xfb41bfff 64bit] [ 0.431137] pci 0000:00:04.6: [8086:2f26] type 00 class 0x088000 [ 0.432019] pci 0000:00:04.6: reg 0x10: [mem 0xfb414000-0xfb417fff 64bit] [ 0.433142] pci 0000:00:04.7: [8086:2f27] type 00 class 0x088000 [ 0.434017] pci 0000:00:04.7: reg 0x10: [mem 0xfb410000-0xfb413fff 64bit] [ 0.435140] pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000 [ 0.436117] pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000 [ 0.437139] pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000 [ 0.438117] pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020 [ 0.439013] pci 0000:00:05.4: reg 0x10: [mem 0xfb439000-0xfb439fff] [ 0.440140] pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000 [ 0.441231] pci 0000:00:11.4: [8086:8d62] type 00 class 0x010601 [ 0.442020] pci 0000:00:11.4: reg 0x10: [io 0xf110-0xf117] [ 0.443012] pci 0000:00:11.4: reg 0x14: [io 0xf100-0xf103] [ 0.444012] pci 0000:00:11.4: reg 0x18: [io 0xf0f0-0xf0f7] [ 0.445012] pci 0000:00:11.4: reg 0x1c: [io 0xf0e0-0xf0e3] [ 0.446012] pci 0000:00:11.4: reg 0x20: [io 0xf020-0xf03f] [ 0.447012] pci 0000:00:11.4: reg 0x24: [mem 0xfb438000-0xfb4387ff] [ 0.448042] pci 0000:00:11.4: PME# supported from D3hot [ 0.449101] pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330 [ 0.450024] pci 0000:00:14.0: reg 0x10: [mem 0xfb400000-0xfb40ffff 64bit] [ 0.451072] pci 0000:00:14.0: PME# supported from D3hot D3cold [ 0.452094] pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000 [ 0.453024] pci 0000:00:16.0: reg 0x10: [mem 0xfb437000-0xfb43700f 64bit] [ 0.454078] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold [ 0.455092] pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000 [ 0.456024] pci 0000:00:16.1: reg 0x10: [mem 0xfb436000-0xfb43600f 64bit] [ 0.457078] pci 0000:00:16.1: PME# supported from D0 D3hot D3cold [ 0.458102] pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320 [ 0.459021] pci 0000:00:1a.0: reg 0x10: [mem 0xfb434000-0xfb4343ff] [ 0.460104] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold [ 0.461096] pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400 [ 0.462089] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 0.463110] pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400 [ 0.464092] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 0.465107] pci 0000:00:1c.4: [8086:8d18] type 01 class 0x060400 [ 0.466091] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 0.467113] pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320 [ 0.468021] pci 0000:00:1d.0: reg 0x10: [mem 0xfb433000-0xfb4333ff] [ 0.469104] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold [ 0.470098] pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100 [ 0.471215] pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601 [ 0.472018] pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077] [ 0.473010] pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063] [ 0.474010] pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057] [ 0.475012] pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043] [ 0.476010] pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f] [ 0.477010] pci 0000:00:1f.2: reg 0x24: [mem 0xfb432000-0xfb4327ff] [ 0.478036] pci 0000:00:1f.2: PME# supported from D3hot [ 0.479089] pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500 [ 0.480024] pci 0000:00:1f.3: reg 0x10: [mem 0xfb431000-0xfb4310ff 64bit] [ 0.481031] pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f] [ 0.482110] pci 0000:00:1f.6: [8086:8d24] type 00 class 0x118000 [ 0.483025] pci 0000:00:1f.6: reg 0x10: [mem 0xfb430000-0xfb430fff 64bit] [ 0.484272] acpiphp: Slot [1] registered [ 0.485029] pci 0000:01:00.0: [8086:10fb] type 00 class 0x020000 [ 0.486021] pci 0000:01:00.0: reg 0x10: [mem 0xfbd80000-0xfbdfffff 64bit pref] [ 0.487009] pci 0000:01:00.0: reg 0x18: [io 0xe020-0xe03f] [ 0.488023] pci 0000:01:00.0: reg 0x20: [mem 0xfbe04000-0xfbe07fff 64bit pref] [ 0.489009] pci 0000:01:00.0: reg 0x30: [mem 0xfb380000-0xfb3fffff pref] [ 0.490043] pci 0000:01:00.0: PME# supported from D0 D3hot [ 0.491022] pci 0000:01:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.492000] pci 0000:01:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 0.493013] pci 0000:01:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.494000] pci 0000:01:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 0.495155] pci 0000:01:00.1: [8086:10fb] type 00 class 0x020000 [ 0.496021] pci 0000:01:00.1: reg 0x10: [mem 0xfbd00000-0xfbd7ffff 64bit pref] [ 0.497009] pci 0000:01:00.1: reg 0x18: [io 0xe000-0xe01f] [ 0.498023] pci 0000:01:00.1: reg 0x20: [mem 0xfbe00000-0xfbe03fff 64bit pref] [ 0.499009] pci 0000:01:00.1: reg 0x30: [mem 0xfb300000-0xfb37ffff pref] [ 0.500043] pci 0000:01:00.1: PME# supported from D0 D3hot [ 0.501018] pci 0000:01:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.502000] pci 0000:01:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 0.503013] pci 0000:01:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.504000] pci 0000:01:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 0.505142] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.506002] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.507002] pci 0000:00:01.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.508002] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff 64bit pref] [ 0.509130] pci 0000:02:00.0: [8086:2700] type 00 class 0x010802 [ 0.510019] pci 0000:02:00.0: reg 0x10: [mem 0xfb210000-0xfb213fff 64bit] [ 0.511042] pci 0000:02:00.0: reg 0x30: [mem 0xfb200000-0xfb20ffff pref] [ 0.512003] pci 0000:02:00.0: enabling Extended Tags [ 0.513106] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.514002] pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.515119] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.516036] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.517063] pci 0000:05:00.0: [1a03:1150] type 01 class 0x060400 [ 0.518086] pci 0000:05:00.0: enabling Extended Tags [ 0.519073] pci 0000:05:00.0: supports D1 D2 [ 0.520000] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.521092] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 0.522002] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.523002] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.524049] pci_bus 0000:06: extended config space not accessible [ 0.525027] pci 0000:06:00.0: [1a03:2000] type 00 class 0x030000 [ 0.526030] pci 0000:06:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff] [ 0.527017] pci 0000:06:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff] [ 0.528021] pci 0000:06:00.0: reg 0x18: [io 0xd000-0xd07f] [ 0.529117] pci 0000:06:00.0: supports D1 D2 [ 0.530000] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.531110] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.532007] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 0.533003] pci 0000:05:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.534089] pci 0000:07:00.0: [8086:1521] type 00 class 0x020000 [ 0.535024] pci 0000:07:00.0: reg 0x10: [mem 0xfb120000-0xfb13ffff] [ 0.536028] pci 0000:07:00.0: reg 0x18: [io 0xc020-0xc03f] [ 0.537015] pci 0000:07:00.0: reg 0x1c: [mem 0xfb144000-0xfb147fff] [ 0.538136] pci 0000:07:00.0: PME# supported from D0 D3hot D3cold [ 0.539040] pci 0000:07:00.0: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.540000] pci 0000:07:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.541026] pci 0000:07:00.0: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.542000] pci 0000:07:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.543164] pci 0000:07:00.1: [8086:1521] type 00 class 0x020000 [ 0.544025] pci 0000:07:00.1: reg 0x10: [mem 0xfb100000-0xfb11ffff] [ 0.545028] pci 0000:07:00.1: reg 0x18: [io 0xc000-0xc01f] [ 0.546014] pci 0000:07:00.1: reg 0x1c: [mem 0xfb140000-0xfb143fff] [ 0.547131] pci 0000:07:00.1: PME# supported from D0 D3hot D3cold [ 0.548038] pci 0000:07:00.1: reg 0x184: [mem 0x00000000-0x00003fff 64bit pref] [ 0.549000] pci 0000:07:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.550027] pci 0000:07:00.1: reg 0x190: [mem 0x00000000-0x00003fff 64bit pref] [ 0.551000] pci 0000:07:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.552148] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 0.553002] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 0.554002] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 0.555003] pci 0000:00:1c.4: bridge has subordinate 07 but max busn 08 [ 0.556685] ACPI: PCI: Interrupt link LNKA configured for IRQ 11 [ 0.557040] ACPI: PCI: Interrupt link LNKB configured for IRQ 10 [ 0.558038] ACPI: PCI: Interrupt link LNKC configured for IRQ 5 [ 0.559039] ACPI: PCI: Interrupt link LNKD configured for IRQ 11 [ 0.560038] ACPI: PCI: Interrupt link LNKE configured for IRQ 0 [ 0.561001] ACPI: PCI: Interrupt link LNKE disabled [ 0.562037] ACPI: PCI: Interrupt link LNKF configured for IRQ 0 [ 0.563001] ACPI: PCI: Interrupt link LNKF disabled [ 0.564037] ACPI: PCI: Interrupt link LNKG configured for IRQ 0 [ 0.565000] ACPI: PCI: Interrupt link LNKG disabled [ 0.566037] ACPI: PCI: Interrupt link LNKH configured for IRQ 0 [ 0.567000] ACPI: PCI: Interrupt link LNKH disabled [ 0.568200] iommu: Default domain type: Passthrough [ 0.569020] pci 0000:06:00.0: vgaarb: setting as boot VGA device [ 0.570000] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.570001] pci 0000:06:00.0: vgaarb: bridge control possible [ 0.571001] vgaarb: loaded [ 0.572067] SCSI subsystem initialized [ 0.573017] ACPI: bus type USB registered [ 0.574012] usbcore: registered new interface driver usbfs [ 0.575007] usbcore: registered new interface driver hub [ 0.576018] usbcore: registered new device driver usb [ 0.577015] pps_core: LinuxPPS API ver. 1 registered [ 0.578000] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.579001] PTP clock support registered [ 0.580019] EDAC MC: Ver: 3.0.0 [ 0.581113] PCI: Using ACPI for IRQ routing [ 0.587538] NetLabel: Initializing [ 0.588000] NetLabel: domain hash size = 128 [ 0.589000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.590012] NetLabel: unlabeled traffic allowed by default [ 0.591050] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 0.592001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.595027] clocksource: Switched to clocksource tsc-early [ 0.610097] VFS: Disk quotas dquot_6.6.0 [ 0.614116] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.621133] pnp: PnP ACPI init [ 0.624572] system 00:01: [io 0x0500-0x057f] has been reserved [ 0.630577] system 00:01: [io 0x0400-0x047f] has been reserved [ 0.636581] system 00:01: [io 0x0600-0x061f] has been reserved [ 0.642585] system 00:01: [io 0x0880-0x0883] has been reserved [ 0.648582] system 00:01: [io 0x0800-0x081f] has been reserved [ 0.654582] system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved [ 0.661629] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 0.668327] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 0.675025] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 0.681725] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 0.688424] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 0.695125] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 0.702008] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 0.708011] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 0.714014] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 0.720012] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 0.726019] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 0.732797] pnp: PnP ACPI: found 5 devices [ 0.742347] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.751361] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 07] add_size 100000 add_align 100000 [ 0.762949] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 0.770883] pci 0000:01:00.0: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 0.778558] pci 0000:01:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 0.786576] pci 0000:01:00.0: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 0.794330] pci 0000:01:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 0.802437] pci 0000:01:00.1: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 0.810105] pci 0000:01:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 0.818121] pci 0000:01:00.1: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 0.825878] pci 0000:01:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 0.833981] pci 0000:01:00.0: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 0.841649] pci 0000:01:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 0.849666] pci 0000:01:00.0: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 0.857422] pci 0000:01:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 0.865527] pci 0000:01:00.1: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 0.873195] pci 0000:01:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 0.881212] pci 0000:01:00.1: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 0.888969] pci 0000:01:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 0.897072] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.902117] pci 0000:00:01.0: bridge window [io 0xe000-0xefff] [ 0.908294] pci 0000:00:01.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 0.915167] pci 0000:00:01.0: bridge window [mem 0xfbd00000-0xfbefffff 64bit pref] [ 0.923018] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.928070] pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff] [ 0.934951] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.940015] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.945079] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.950132] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 0.956319] pci 0000:05:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.963209] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 0.968521] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 0.974707] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff] [ 0.981589] pci 0000:07:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 0.989433] pci 0000:07:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 0.997373] pci 0000:07:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 1.005223] pci 0000:07:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 1.013163] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 1.018213] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 1.024392] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 1.031264] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 1.039115] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 1.048260] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window] [ 1.054517] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window] [ 1.060776] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window] [ 1.067043] pci_bus 0000:00: resource 7 [io 0x1000-0xffff window] [ 1.073308] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window] [ 1.080267] pci_bus 0000:00: resource 9 [mem 0xfedb0000-0xfedb000f window] [ 1.087226] pci_bus 0000:00: resource 10 [mem 0xfedc0000-0xfedc000f window] [ 1.094274] pci_bus 0000:00: resource 11 [mem 0x90000000-0xfbffbfff window] [ 1.101320] pci_bus 0000:01: resource 0 [io 0xe000-0xefff] [ 1.106975] pci_bus 0000:01: resource 1 [mem 0xfb300000-0xfb3fffff] [ 1.113321] pci_bus 0000:01: resource 2 [mem 0xfbd00000-0xfbefffff 64bit pref] [ 1.120647] pci_bus 0000:02: resource 1 [mem 0xfb200000-0xfb2fffff] [ 1.126998] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff] [ 1.132652] pci_bus 0000:05: resource 1 [mem 0xfa000000-0xfb0fffff] [ 1.138998] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 1.144658] pci_bus 0000:06: resource 1 [mem 0xfa000000-0xfb0fffff] [ 1.151012] pci_bus 0000:07: resource 0 [io 0xc000-0xcfff] [ 1.156669] pci_bus 0000:07: resource 1 [mem 0xfb100000-0xfb1fffff] [ 1.163023] pci_bus 0000:07: resource 2 [mem 0x90000000-0x900fffff 64bit pref] [ 1.170452] NET: Registered protocol family 2 [ 1.175120] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc) [ 1.184513] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, vmalloc) [ 1.193503] TCP established hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc) [ 1.202020] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc) [ 1.209715] TCP: Hash tables configured (established 262144 bind 65536) [ 1.216527] MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, vmalloc) [ 1.224386] UDP hash table entries: 16384 (order: 7, 524288 bytes, vmalloc) [ 1.231494] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, vmalloc) [ 1.239082] NET: Registered protocol family 1 [ 1.243524] NET: Registered protocol family 44 [ 1.248140] pci 0000:00:05.0: disabled boot interrupts on device [8086:2f28] [ 1.263036] pci 0000:00:05.0: quirk_disable_intel_boot_interrupt+0x0/0xf0 took 14547 usecs [ 1.289148] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x61f took 17147 usecs [ 1.313147] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x61f took 16095 usecs [ 1.320666] pci 0000:01:00.0: CLS mismatch (64 != 32), using 64 bytes [ 1.327205] pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.335709] Unpacking initramfs... [ 1.620137] Freeing initrd memory: 28484K [ 1.624309] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.630841] software IO TLB: mapped [mem 0x0000000069000000-0x000000006d000000] (64MB) [ 1.638868] ACPI: bus type thunderbolt registered [ 1.658678] Initialise system trusted keyrings [ 1.663212] Key type blacklist registered [ 1.667335] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.675280] zbud: loaded [ 1.678162] pstore: using deflate compression [ 1.682813] Platform Keyring initialized [ 1.764105] NET: Registered protocol family 38 [ 1.768639] Key type asymmetric registered [ 1.772827] Asymmetric key parser 'x509' registered [ 1.777800] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.785335] io scheduler mq-deadline registered [ 1.789951] io scheduler kyber registered [ 1.794072] io scheduler bfq registered [ 1.798056] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 1.805396] pcieport 0000:00:01.0: PME: Signaling with IRQ 25 [ 1.811421] pcieport 0000:00:02.0: PME: Signaling with IRQ 27 [ 1.817445] pcieport 0000:00:03.0: PME: Signaling with IRQ 29 [ 1.823432] pcieport 0000:00:1c.0: PME: Signaling with IRQ 30 [ 1.829421] pcieport 0000:00:1c.2: PME: Signaling with IRQ 31 [ 1.835400] pcieport 0000:00:1c.4: PME: Signaling with IRQ 32 [ 1.841363] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 1.848788] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.857274] ACPI: Power Button [PWRB] [ 1.861047] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.868567] ACPI: Power Button [PWRF] [ 1.873442] ERST: Error Record Serialization Table (ERST) support is initialized. [ 1.881085] pstore: Registered erst as persistent store backend [ 1.887250] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 1.894852] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.921799] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 1.949845] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 1.957625] Non-volatile memory driver v1.3 [ 1.962301] rdac: device handler registered [ 1.966638] hp_sw: device handler registered [ 1.970990] emc: device handler registered [ 1.975196] alua: device handler registered [ 1.979535] libphy: Fixed MDIO Bus: probed [ 1.983780] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.990396] ehci-pci: EHCI PCI platform driver [ 1.995028] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.000390] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.007902] ehci-pci 0000:00:1a.0: debug port 2 [ 2.016423] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb434000 [ 2.029077] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.034951] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.043322] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.050651] usb usb1: Product: EHCI Host Controller [ 2.055611] usb usb1: Manufacturer: Linux 4.18.0-372.9.1.el8.x86_64 ehci_hcd [ 2.062749] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.067546] hub 1-0:1.0: USB hub found [ 2.071391] hub 1-0:1.0: 2 ports detected [ 2.075667] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.081036] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.088543] ehci-pci 0000:00:1d.0: debug port 2 [ 2.097056] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb433000 [ 2.109036] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.114895] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.123260] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.130581] usb usb2: Product: EHCI Host Controller [ 2.135541] usb usb2: Manufacturer: Linux 4.18.0-372.9.1.el8.x86_64 ehci_hcd [ 2.142669] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.147483] hub 2-0:1.0: USB hub found [ 2.151328] hub 2-0:1.0: 2 ports detected [ 2.155532] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.161799] ohci-pci: OHCI PCI platform driver [ 2.166337] uhci_hcd: USB Universal Host Controller Interface driver [ 2.172886] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.178249] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.186795] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 2.196151] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.204518] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.211848] usb usb3: Product: xHCI Host Controller [ 2.216805] usb usb3: Manufacturer: Linux 4.18.0-372.9.1.el8.x86_64 xhci-hcd [ 2.223933] usb usb3: SerialNumber: 0000:00:14.0 [ 2.228713] hub 3-0:1.0: USB hub found [ 2.232555] hub 3-0:1.0: 15 ports detected [ 2.238451] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.243795] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.251300] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.257702] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 2.266068] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.273393] usb usb4: Product: xHCI Host Controller [ 2.278353] usb usb4: Manufacturer: Linux 4.18.0-372.9.1.el8.x86_64 xhci-hcd [ 2.285483] usb usb4: SerialNumber: 0000:00:14.0 [ 2.290310] hub 4-0:1.0: USB hub found [ 2.294153] hub 4-0:1.0: 6 ports detected [ 2.299115] usbcore: registered new interface driver usbserial_generic [ 2.305734] usbserial: USB Serial support registered for generic [ 2.311855] i8042: PNP: No PS/2 controller found. [ 2.314027] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.316681] mousedev: PS/2 mouse device common for all mice [ 2.328999] rtc_cmos 00:00: RTC can wake from S4 [ 2.333855] rtc_cmos 00:00: registered as rtc0 [ 2.338398] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.346172] intel_pstate: Intel P-state driver initializing [ 2.352697] hid: raw HID events driver (C) Jiri Kosina [ 2.357954] usbcore: registered new interface driver usbhid [ 2.363610] usbhid: USB HID core driver [ 2.367643] drop_monitor: Initializing network drop monitor service [ 2.374039] Initializing XFRM netlink socket [ 2.378471] NET: Registered protocol family 10 [ 2.383232] Segment Routing with IPv6 [ 2.387019] NET: Registered protocol family 17 [ 2.391622] mpls_gso: MPLS GSO support [ 2.394028] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.402377] microcode: sig=0x306f2, pf=0x1, revision=0x49 [ 2.407957] microcode: Microcode Update Driver: v2.2. [ 2.408016] resctrl: L3 monitoring detected [ 2.417423] AVX2 version of gcm_enc/dec engaged. [ 2.422122] AES CTR mode by8 optimization enabled [ 2.453441] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05 [ 2.455724] sched_clock: Marking stable (2455719929, 0)->(5600152012, -3144432083) [ 2.461722] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.474033] usb 3-12: new high-speed USB device number 2 using xhci_hcd [ 2.476837] hub 1-1:1.0: USB hub found [ 2.4874] registered taskstats version 1 [ 2.487191] hub 1-1:1.0: 6 ports detected [ 2.495597] Loading compiled-in X.509 certificates [ 2.528231] Loaded X.509 cert 'Red Hat Enterprise Linux kernel signing key: fcec8079a12caa6a157125702c0054357b4fc157' [ 2.531435] usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05 [ 2.539247] Loaded X.509 cert 'Red Hat Enterprise Linux Driver Update Program (key 3): bf57f3e87362bc7229d9f465321773dfd1f77a80' [ 2.547239] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.559197] Loaded X.509 cert 'Red Hat Enterprise Linux kpatch signing key: 4d38fd864ebe18c5f0b72e3852e2014c3a676fc8' [ 2.566326] hub 2-1:1.0: USB hub found [ 2.576861] zswap: loaded using pool lzo/zbud [ 2.580827] hub 2-1:1.0: 8 ports detected [ 2.589216] page_owner is disabled [ 2.597805] Key type big_key registered [ 2.604192] Key type encrypted registered [ 2.608287] ima: No TPM chip found, activating TPM-bypass! [ 2.613860] ima: Allocated hash algorithm: sha256 [ 2.618654] ima: No architecture policies found [ 2.623275] evm: Initialising EVM extended attributes: [ 2.628495] evm: security.selinux [ 2.630220] usb 3-12: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 2.631888] evm: security.ima [ 2.631889] evm: security.capability [ 2.640256] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.643301] evm: HMAC attrs: 0x1 [ 2.654938] hub 3-12:1.0: USB hub found [ 2.656029] tsc: Refined TSC clocksource calibration: 3499.996 MHz [ 2.656033] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734d20948, max_idle_ns: 440795306379 ns [ 2.685592] clocksource: Switched to clocksource tsc [ 2.685676] hub 3-12:1.0: 4 ports detected [ 2.690643] rtc_cmos 00:00: setting system clock to 2023-07-19 16:47:51 UTC (1689785271) [ 2.703815] Freeing unused decrypted memory: 2036K [ 2.709031] Freeing unused kernel image (initmem) memory: 2520K [ 2.726041] Write protecting the kernel read-only data: 24576k [ 2.732312] Freeing unused kernel image (text/rodata gap) memory: 2012K [ 2.739283] Freeing unused kernel image (rodata/data gap) memory: 1948K [ 2.756105] systemd[1]: systemd 239 (239-58.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 2.790113] systemd[1]: Detected architecture x86-64. [ 2.795247] systemd[1]: Running in initial RAM disk. Welcome to Red Hat Enterprise Linux 8.6 (Ootpa) dracut-049-201.git20220131.el8 (Initramfs)! [ 2.819123] systemd[1]: Set hostname to . [ 2.857821] systemd[1]: Reached target Local File Systems. [ OK ] Reached target Local File Systems. [ 2.870222] systemd[1]: Listening on udev Control Socket. [ OK ] Listening on udev Control Socket. [ 2.882235] systemd[1]: Listening on udev Kernel Socket. [ OK ] Listening on udev Kernel Socket. [ 2.894095] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 2.904280] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Jou[ 2.917115] sarget Timers. [ OK ] Reached target Timers. [ OK ] Reached target Slices. [ OK ] Listening on Journal Socket. Starting Apply Kernel Variables... Starting Create list of required st…ce nodes for the current kernel... Starting Setup Virtual Console... [ OK ] Reached target Sockets. [ OK ] Started Memstrack Anylazing Service. Starting Create Volatile Files and Directories... Starting Journal Service... [ OK ] Started Appl[ 2.997029] usb 3-12.1: new low-speed USB device number 3 using xhci_hcd y Kernel Va[ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started Setup Virtual Console. [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Journal Service. Starting dracut cmdline hook... Starting Create Static Device Nodes in /dev... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started dracut cmdline hook. Starting dracut pre-udev hook... [ 3.113238] usb 3-12.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 3.121787] usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ OK ] Started dracut pre-udev hook. [ 3.134354] i HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/0003:0557:2419.0001/input/input2 Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Starting udev Coldplug all Devices... Mounting Kernel Configuration File System... [ 3.198157] hneric 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-12.1/input0 [ OK [[ 3.210801] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/0003:0557:2419.0002/input/input3 0m] Mounted Kern[ 3.223606] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-12.1/input1 el Configuration File System. [ OK ] Started udev Coldplug all Devices. [ OK ] Reached target System Initialization. Starting dracut initqueue hook... Starting Show Plymouth Boot Screen... [ OK ] Started Show Plymouth Boot Screen. [ OK ] Started Forward Password Requests to Plymouth Directory Watch. [ OK [ 3.332472] dca service started, version 1.12.1 ] Reached target Paths. [ OK ] Reached target Basic System. [ 3.344653] nvme nvme0: pci function 0000:02:00.0 [ 3.353261] nvme nvme0: 8/0/0 default/read/poll queues [ 3.359517] nvme0n1: detected capacity change from 0 to 480103981056 [ 3.366298] igb: Intel(R) Gigabit Ethernet Network Driver [ 3.371799] igb: Copyright (c) 2007-2014 Intel Corporation. [ 3.381912] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver [ 3.388120] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 3.388316] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode [ 3.402168] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst [ 3.411386] scsi host0: ahci [ 3.414496] scsi host1: ahci [ 3.414598] scsi host2: ahci [ 3.414726] scsi host3: ahci [ 3.414774] ata1: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438100 irq 52 [ 3.414780] ata2: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438180 irq 52 [ 3.414786] ata3: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438200 irq 52 [ 3.414791] ata4: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438280 irq 52 [ 3.415271] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode [ 3.415275] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst [ 3.430386] scsi host4: ahci [ 3.435314] igb 0000:07:00.0: added PHC on eth0 [ 3.441705] scsi host5: ahci [ 3.449031] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 3.456635] scsi host6: ahci [ 3.464823] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:6b:fe:cc [ 3.472650] scsi host7: ahci [ 3.475538] igb 0000:07:00.0: eth0: PBA No: 050B00-000 [ 3.480226] scsi host8: ahci [ 3.483035] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 3.490107] scsi host9: ahci [ 3.511519] ast 0000:06:00.0: [drm] Using P2A bridge for configuration [ 3.519065] ata5: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432100 irq 53 [ 3.521983] ast 0000:06:00.0: [drm] AST 2400 detected [ 3.528632] ata6: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432180 irq 53 [ 3.536143] ast 0000:06:00.0: [drm] Analog VGA only [ 3.541260] ata7: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432200 irq 53 [ 3.546519] igb 0000:07:00.1: added PHC on eth1 [ 3.546521] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection [ 3.546523] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:6b:fe:cd [ 3.546600] igb 0000:07:00.1: eth1: PBA No: 050B00-000 [ 3.546602] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 3.548770] ast 0000:06:00.0: [drm] dram MCLK=408 Mhz type=1 bus_width=16 [ 3.550168] igb 0000:07:00.0 eno1: renamed from eth0 [ 3.552183] ixgbe 0000:01:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 3.552472] ixgbe 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x8 link) [ 3.552555] ixgbe 0000:01:00.0: MAC: 2, PHY: 14, SFP+: 3, PBA No: 400900-000 [ 3.552557] ixgbe 0000:01:00.0: 0c:c4:7a:bd:15:60 [ 3.553722] ata8: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432280 irq 53 [ 3.553724] ata9: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432300 irq 53 [ 3.562116] [drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on minor 0 [ 3.565934] ata10: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432380 irq 53 [ 3.668693] igb 0000:07:00.1 eno2: renamed from eth1 [ 3.673752] fbcon: astdrmfb (fb0) is primary device [ 3.726663] ata4: SATA link down (SStatus 0 SControl 300) [ 3.728237] ata1: SATA link down (SStatus 0 SControl 300) [ 3.731080] ata2: SATA link down (SStatus 0 SControl 300) [ 3.732282] ata3: SATA link down (SStatus 0 SControl 300) [ 3.786294] Console: switching to colour frame buffer device 128x48 [ 3.787478] ixgbe 0000:01:00.0: Intel(R) 10 Gigabit Network Connection [ 3.787678] libphy: ixgbe-mdio: probed [ 3.849299] ast 0000:06:00.0: [drm] fb0: astdrmfb frame buffer device [ 3.877541] ata6: SATA link down (SStatus 0 SControl 300) [ 3.883008] ata7: SATA link down (SStatus 0 SControl 300) [ 3.888486] ata9: SATA link down (SStatus 0 SControl 300) [ 3.893988] ata8: SATA link down (SStatus 0 SControl 300) [ 3.899498] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 3.905815] ata10: SATA link down (SStatus 0 SControl 300) [ 3.911750] ata5.00: ATA-9: ST1000NM0033-9ZM173, SN04, max UDMA/133 [ 3.918028] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 3.926008] ata5.00: configured for UDMA/133 [ 3.930383] scsi 4:0:0:0: Direct-Access ATA ST1000NM0033-9ZM SN04 PQ: 0 ANSI: 5 [ 3.943808] scsi 4:0:0:0: Attached scsi generic sg0 type 0 [ 3.953183] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 3.961103] sd 4:0:0:0: [sda] Write Protect is off [ 3.966105] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3.984209] sda: sda1 [ 3.988750] sd 4:0:0:0: [sda] Attached SCSI disk [ OK ] Found device ST1000NM0033-9ZM173 1. [ OK ] Reached target Initrd Root Device. [ 4.949443] ixgbe 0000:01:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 4.960215] ixgbe 0000:01:00.1: 32.000 Gb/s available PCIe bandwidth (5.0 GT/s PCIe x8 link) [ 4.969208] ixgbe 0000:01:00.1: MAC: 2, PHY: 1, PBA No: 400900-000 [ 4.975865] ixgbe 0000:01:00.1: 0c:c4:7a:bd:15:61 [ 4.989882] ixgbe 0000:01:00.1: Intel(R) 10 Gigabit Network Connection [ 4.997657] libphy: ixgbe-mdio: probed [ 5.005169] ixgbe 0000:01:00.1 ens1f1: renamed from eth1 [ 5.043299] ixgbe 0000:01:00.0 ens1f0: renamed from eth0 [ OK ] Started dracut initqueue hook. Starting File System Check on /dev/…b72-f581-4b1d-8578-0d8161fd4ca1... [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ OK ] Started File System Check on /dev/d…86b72-f581-4b1d-8578-0d8161fd4ca1. Mounting /sysroot... [ 5.248098] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ OK ] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting dracut pre-pivot and cleanup hook... [ OK ] Started dracut pre-pivot and cleanup hook. Starting Cleaning Up and Shutting Down Daemons... [ OK ] Stopped target Timers. Starting Plymouth switch root service... Starting Setup Virtual Console... [ OK ] Stopped dracut pre-pivot and cleanup hook. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped target Initrd Default Target. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Stopped target Sockets. [ OK ] Stopped target System Initialization. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped target Local File Systems. [ OK ] Stopped target Swap. Stopping udev Kernel Device Manager... [ OK ] Stopped target Paths. [ OK ] Stopped target Initrd Root Device. [ OK ] Stopped dracut initqueue hook. [ OK ] Stopped udev Coldplug all Devices. [ OK ] Started Cleaning Up and Shutting Down Daemons. [ OK ] Stopped udev Kernel Device Manager. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create list of required sta…vice nodes for the current kernel. [ OK ] Stopped dracut pre-udev hook. [ OK ] Stopped dracut cmdline hook. [ OK ] Closed udev Control Socket. [ OK ] Closed udev Kernel Socket. Starting Cleanup udevd DB... [ OK ] Started Cleanup u[ 5.621264] printk: systemd: 16 output lines suppressed due to ratelimiting devd DB. [ OK ] Started Setup Virtual Console. [ OK ] Reached target Switch Root. [ OK ] Started Plymouth switch root service. Starting Switch Root... [ 6.277091] SELinux: policy capability network_peer_controls=1 [ 6.283362] SELinux: policy capability open_perms=1 [ 6.288646] SELinux: policy capability extended_socket_class=1 [ 6.294876] SELinux: policy capability always_check_network=0 [ 6.301013] SELinux: policy capability cgroup_seclabel=1 [ 6.306712] SELinux: policy capability nnp_nosuid_transition=1 [ 6.341301] audit: type=1403 audit(1689785275.155:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 6.343361] systemd[1]: Successfully loaded SELinux policy in 241.047ms. [ 6.444934] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 20.505ms. [ 6.473630] systemd[1]: systemd 239 (239-58.el8) running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 6.509575] systemd[1]: Detected architecture x86-64. Welcome to Red Hat Enterprise Linux 8.6 (Ootpa)! [ 6.549337] systemd[1]: Set hostname to . [ 7.430114] systemd[1]: systemd-journald.service: Succeeded. [ 7.438919] systemd[1]: initrd-switch-root.service: Succeeded. [ 7.446512] systemd[1]: Stopped Switch Root. [ OK [[ 7.452802] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart. 0m] Stopped Swit[ 7.452883] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. ch Root. [ 7.452963] systemd[1]: Stopped Journal Service. [ OK ] Stopped Jour[ 7.482744] systemd[1]: Starting Journal Service... nal Service. Starting Journal Service... Starting Remount Root and Kernel File Systems... [ OK ] Reached target Swap. [ OK ] Stopped Plymouth switch root service. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Stopped target Switch Root. [ OK ] Stopped target Initrd File Systems. [ OK ] Created slice system-sshd\x2dkeygen.slice. Mounting Huge Pages File System... [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Created slice User and Session Slice. Starting Setup Virtual Console... [ 7.564637] EXT4-fs (sda1): re-mounted. Opts: (null) Mounting POSIX Message Queue File System... Mounting Kernel Debug File System... [ OK ] Listening on udev Kernel Socket. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Listening on LVM2 poll daemon socket. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. [ OK ] Listening on udev Control Socket. [ OK ] Created slice system-getty.slice. [ OK ] Listening on Process Core Dump Socket. Starting udev Coldplug all Devices... [ OK ] Stopped target Initrd Root File System. Starting Load Kernel Modules... [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Listening on RPCbind Server Activation Socket. [ OK ] Reached target RPC Port Mapper. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Slices. Starting Read and set NIS domainname from /etc/sysconfig/network... [ OK ] Started Journal Service. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Mounted Huge Pages File System. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Read and set NIS domainname from /etc/sysconfig/network. Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ 7.761639] fuse: init (API version 7.33) [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started Load Kernel Modules. Mounting FUSE Control File System... Starting Apply Kernel Variables... [ 7.803204] device-mapper: uevent: version 1.0.3 [ OK ] Mounted FUSE[ 7.810980] device-mapper: ioctl: 4.43.0-ioctl (2020-10-01) initialised: dm-devel@redhat.com Control File System. [ OK ] Started Setup Virtual Console. [ OK ] Started Apply Kernel Variables. [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Import network configuration from initramfs... Starting Restore /run/initramfs on shutdown... Starting Tell Plymouth To Write Out Runtime Data... Starting udev Kernel Device Manager... [ OK ] Started Restore /run/initramfs on shutdown. [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Import network configuration from initramfs. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Create Volatile Files and Directories. Mounting RPC Pipe File System... Starting RPC Bind... Starting Security Auditing Service... [ 8.353802] RPC: Registered named UNIX socket transport module. [ 8.360150] RPC: Registered udp transport module. [ 8.365590] RPC: Registered tcp transport module. [ 8.370957] RPC: Registered tcp NFSv4.1 backchannel transport module. [ OK ] Started RPC [ 8.380099] ioatdma: Intel(R) QuickData Technology Driver 5.00 Bind. [ OK ] Mounted RPC Pipe File System. [ OK ] Reached target rpc_pipefs.target. [ 8.415346] igb 0000:07:00.0: DCA enabled [ 8.421255] igb 0000:07:00.1: DCA enabled [ 8.470372] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Started daily update of the root trust anchor for DNSSEC. [ OK ] Started Updates mlocate database every day. [ OK ] Started Generate summary of yesterday's process accounting. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started CUPS Scheduler. [ OK ] Reached target Paths. [ OK ] Listening on SSSD Kerberos Cache Manager responder socket. [ OK ] Listening on CUPS Scheduler. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started libstoragemgmt plug-in server daemon. Starting NTP client/server... [ OK ] Started irqbalance daemon. Starting VDO volume services... Starting Authorization Manager... Starting System Security Services Daemon... Starting Kernel Samepage Merging... [ OK ] Started D-Bus System Message Bus. Starting Avahi mDNS/DNS-SD Stack... Starting Self Monitoring and Reporting Technology (SMART) Daemon... Starting Load CPU microcode update... Starting Resets System Activity Logs... [ OK ] Started Machine Check Exception Logging Daemon. [ OK ] Reached target sshd-keygen.target. Starting Network Manager... [ OK ] Started Run system activity accounting tool every 10 minutes. [ OK ] Reached target Timers. [ OK ] Started Update a database for mlocate. Starting update of the root trust a…or DNSSEC validation in unbound... [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. [ OK ] Started Kernel Samepage Merging. [ OK ] Started Load CPU microcode update. [ OK ] Started Resets System Activity Logs. Starting Kernel Samepage Merging (KSM) Tuning Daemon... [ OK ] Started Avahi mDNS/DNS-SD Stack. [ OK ] Started NTP client/server. [ OK ] Started Kernel Samepage Merging (KSM) Tuning Daemon. [ OK ] Started Network Manager. [ OK ] Reached target Network. Starting GSSAPI Proxy Daemon... Starting Dynamic System Tuning Daemon... Starting OpenSSH server daemon... Starting Enable periodic update of entitlement certificates.... Starting Network Manager Wait Online... [ OK ] Started update of the root trust an… for DNSSEC validation in unbound. Starting Hostname Service... [ OK ] Started Enable periodic update of entitlement certificates.. [ OK ] Started Hostname Service. [ OK ] Started OpenSSH server daemon. [ 11.183047] IPMI message handler: version 39.2 [ 11.216364] ipmi device interface [ 11.230411] ipmi_si: IPMI System Interface driver [ 11.232992] power_meter ACPI000D:00: Found ACPI power meter. [ 11.236750] ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS [ 11.243459] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 11.251288] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 11.268103] ipmi_si: Adding SMBIOS-specified kcs state machine [ OK ] Started GSSAPI Proxy Daemon.[ 11.275369] ipmi_si IPI0001:00: ipmi_platform: probing via ACPI [ 11.275423] ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ OK ] Reached target NFS client services. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. [ 11.349278] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 11.358465] ipmi_si: Adding ACPI-specified kcs state machine Startin[ 11.365626] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 g Network Manager Script Dispatcher Service... [ 11.382341] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ OK ] Started Network Manager Script Dispatcher Service. [ 11.420985] ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x002a7c, prod_id: 0x0833, dev_id: 0x20) [ OK ] Started Authorization Manager. [ 11.510600] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 11.540587] ipmi_ssif: IPMI SSIF Interface driver [ OK ] Created slice system-lvm2\x2dpvscan.slice. [ 11.804626] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt Starting LVM event activation on device 259:0... [ 11.838799] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready [ 11.898384] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready [ 11.926427] IPv6: ADDRCONF(NETDEV_UP): ens1f1: link is not ready [ 11.932145] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 11.966740] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 655360 ms ovfl timer [ 11.966744] RAPL PMU: hw unit of domain package 2^-14 Joules [ 11.966745] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 12.028438] ixgbe 0000:01:00.1: registered PHC device on ens1f1 [ 12.085505] iTCO_vendor_support: vendor-support=0 [ 12.127876] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 12.135171] iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460) [ 12.143995] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 12.156309] IPv6: ADDRCONF(NETDEV_UP): ens1f1: link is not ready [ 12.164996] IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready [ 12.241977] ixgbe 0000:01:00.0: registered PHC device on ens1f0 [ OK ] Started LVM event activation on device 259:0. [ 12.353942] IPv6: ADDRCONF(NETDEV_UP): ens1f0: link is not ready [ 12.379636] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ OK ] Started System Security Services Daemon. [ OK ] Reached target User and Group Name Lookups. Starting CUPS Scheduler... Starting Login Service... [ 12.440405] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 12.443043] ixgbe 0000:01:00.0 ens1f0: detected SFP+: 3 Starting Permit User Sessions... [ OK ] Started VDO volume services. [ OK ] Started Permit User Sessions. [ OK ] Started Command Scheduler. [ OK ] Started Job spooling tools. [ OK ] Started Login Service. [ 12.549013] EDAC MC0: Giving out device to module sb_edac controller Haswell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT) [ 12.560702] EDAC sbridge: Ver: 1.1.2 [ 12.568354] ixgbe 0000:01:00.0 ens1f0: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 12.578203] IPv6: ADDRCONF(NETDEV_CHANGE): ens1f0: link becomes ready [ 12.658946] intel_rapl_common: Found RAPL domain package [ 12.681402] intel_rapl_common: Found RAPL domain dram [ 12.686943] intel_rapl_common: DRAM domain energy unit 15300pj [ OK ] Started CUPS Scheduler. [ OK ] Started Dynamic System Tuning Daemon. [ OK ] Started Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting /etc/rc.d/rc.local Compatibility... Starting Crash recovery kernel arming... + '[' '!' -f /.cephlab_net_configured ']' + set +e + attempts=0 + myips= + '[' '' '!=' '' ']' + '[' 0 -ge 10 ']' ++ ip -4 addr ++ grep -oP '(?<=inet\s)\d+(\.\d+){3}' ++ grep -v '127.0.0.1\|127.0.1.1' [ OK ] Started Nagios Remote Plugin Executor. Starting Notify NFS peers of a restart... Starting System Logging Service... [ OK ] Started Notify NFS peers of a restart. + myips=172.21.15.60 + attempts=1 + sleep 1 [ OK ] Started System Logging Service. + '[' 172.21.15.60 '!=' '' ']' + set -e + '[' -n 172.21.15.60 ']' + for ip in $myips + timeout 1s ping -I 172.21.15.60 -nq -c1 172.21.0.1 ++ dig +short -x 172.21.15.60 @172.21.0.1 ++ sed 's/\.com.*/\.com/g' [ OK ] Started Crash recovery kernel arming. + newhostname=smithi060.front.sepia.ceph.com + '[' -n smithi060.front.sepia.ceph.com ']' + hostname smithi060.front.sepia.ceph.com ++ hostname -d + newdomain=front.sepia.ceph.com ++ hostname -s + shorthostname=smithi060 + echo smithi060 + grep -q front.sepia.ceph.com /etc/hosts + sed -i 's/.*front.sepia.ceph.com.*/172.21.15.60 smithi060.front.sepia.ceph.com smithi060/g' /etc/hosts + break + command -v zypper + command -v apt-get + '[' -e /.cephlab_rc_local ']' + exit 0 [ OK ] Started /etc/rc.d/rc.local Compatibility. Starting Terminate Plymouth Boot Screen... Starting Hold until boot process finishes up... Red Hat Enterprise Linux 8.6 (Ootpa) Kernel 4.18.0-372.9.1.el8.x86_64 on an x86_64 Activate the web console with: systemctl enable --now cockpit.socket smithi060 login: