[Enter `^Ec?' for help] [spying] sion 5 of user ubuntu. [ OK ] Started User Manager for UID 1000. [ OK ] Started Network Manager Wait Online. [ OK ] Reached target Network is Online. Starting Crash recovery kernel arming... Starting System Logging Service... [ OK ] Started System Logging Service. + ethtool eno2 + grep -q 'Link detected: yes' + ifconfig eno2 down + for nic in $nics + ifconfig enp3s0f0 up + sleep 5 [* ] (1 of 2) A start job is running for…cal Compatibility (17s / no limit) [** ] (1 of 2) A start job is running for…cal Compatibility (18s / no limit) [*** ] (1 of 2) A start job is running for…cal Compatibility (18s / no limit) [ *** ] (2 of 2) A start job is running for…ery kernel arming (19s / no limit) [ *** ] (2 of 2) A start job is running for…ery kernel arming (19s / no limit) [ ***] (2 of 2) A start job is running for…ery kernel arming (20s / no limit) [ **] (1 of 2) A start job is running for…cal Compatibility (20s / no limit) [ *] (1 of 2) A start job is running for…cal Compatibility (20s / no limit)+ ethtool enp3s0f0 + grep -q 'L[ 28.213070] ixgbe 0000:03:00.0: removed PHC on enp3s0f0 ink detected: yes' + ifconfig enp3s0f0 down + for nic in $nics + ifconfig enp3s0f1 up + sleep 5 [ OK ] Started Crash recovery kernel arming. + ethtool enp3s0f1 + grep -q 'Link detected: yes' + command -v zypper + command -v apt-get + echo -e 'DEVICE=enp3s0f1\nBOOTPROTO=dhcp\nONBOOT=yes' + set +e + ifdown enp3s0f1 [ **] A start job is running for /etc/rc.…cal Compatibility (26s / no limit)  Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. Connection 'System enp3s0f1' successfully deactivated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/1) + ifup enp3s0f1 Connection successfully activated (D-Bus active path: /org/freedesktop/NetworkManager/ActiveConnection/2) + attempts=0 + ping -I enp3s0f1 -nq -c1 172.21.0.11 PING 172.21.0.11 (172.21.0.11) from 172.21.15.146 enp3s0f1: 56(84) bytes of data. --- 172.21.0.11 ping statistics --- 1 packets transmitted, 1 received, 0% packet loss, time 0ms rtt min/avg/max/mdev = 0.276/0.276/0.276/0.000 ms + '[' 0 == 5 ']' + touch /.cephlab_net_configured + break + set +e + attempts=0 + myips= + '[' '' '!=' '' ']' + '[' 0 -ge 10 ']' ++ ip -4 addr ++ grep -oP '(?<=inet\s)\d+(\.\d+){3}' ++ grep -v '127.0.0.1\|127.0.1.1' + myips=172.21.15.146 + attempts=1 + sleep 1 + '[' 172.21.15.146 '!=' '' ']' + set -e + '[' -n 172.21.15.146 ']' + for ip in $myips + timeout 1s ping -I 172.21.15.146 -nq -c1 172.21.0.1 ++ dig +short -x 172.21.15.146 @172.21.0.1 ++ sed 's/\.com.*/\.com/g' + newhostname=smithi146.front.sepia.ceph.com + '[' -n smithi146.front.sepia.ceph.com ']' + hostname smithi146.front.sepia.ceph.com ++ hostname -d + newdomain=front.sepia.ceph.com ++ hostname -s + shorthostname=smithi146 + echo smithi146 + grep -q front.sepia.ceph.com /etc/hosts + sed -i 's/.*front.sepia.ceph.com.*/172.21.15.146 smithi146.front.sepia.ceph.com smithi146/g' /etc/hosts + break + command -v zypper + command -v apt-get + '[' -e /.cephlab_rc_local ']' + exit 0 [ OK ] Started /etc/rc.d/rc.local Compatibility. Starting Terminate Plymouth Boot Screen... Starting Hold until boot process finishes up... CentOS Linux 8 (Core) Kernel 4.18.0-80.11.2.el8_0.x86_64 on an x86_64 Activate the web console with: systemctl enable --now cockpit.socket smithi146 login: [ 68.854037] SGI XFS with ACLs, security attributes, no debug enabled [ 68.905492] fuse init (API version 7.27) [ 69.088828] XFS (dm-5): Mounting V5 Filesystem [ 69.097064] XFS (dm-5): Ending clean mount [ 69.101212] SELinux: Context system_u:object_r:ceph_var_lib_t:s0 is not valid (left unmapped). [ 69.158521] XFS (dm-5): Unmounting Filesystem [ 69.197015] XFS (dm-5): Mounting V5 Filesystem [ 69.205742] XFS (dm-5): Ending clean mount [ 69.256534] XFS (dm-5): Unmounting Filesystem [ 69.298850] XFS (dm-5): Mounting V5 Filesystem [ 69.307031] XFS (dm-5): Ending clean mount [ 69.360526] XFS (dm-5): Unmounting Filesystem [ 69.403277] XFS (dm-5): Mounting V5 Filesystem [ 69.411497] XFS (dm-5): Ending clean mount [ 69.460526] XFS (dm-5): Unmounting Filesystem [ 69.501509] XFS (dm-5): Mounting V5 Filesystem [ 69.514182] XFS (dm-5): Ending clean mount [ 69.566527] XFS (dm-5): Unmounting Filesystem [ OK ] Started Show Plymouth Reboot Screen. [ OK ] Stopped Login Service. [ OK ] Stopped target User and Group Name Lookups. Stopping System Security Services Daemon... [ OK ] Stopped System Security Services Daemon. [ OK ] Stopped Network Manager. Stopping D-Bus System Message Bus... [ OK ] Stopped D-Bus System Message Bus. [ OK ] Stopped VDO volume services. [ OK ] Stopped target Basic System. [ OK ] Stopped target Slices. [ OK ] Removed slice User and Session Slice. [ OK ] Stopped target Sockets. [ OK ] Closed SSSD Kerberos Cache Manager responder socket. [ OK ] Closed D-Bus System Message Bus Socket. [ [ 70.662499] audit: type=1305 audit(1579808941.667:396): audit_pid=0 old=739 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1 OK ] Stopped Forward Password Requests to Plymouth Directory Watch. [ OK ] Stopped target Paths. [ [ 70.686629] audit: type=1131 audit(1579808941.691:397): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=auditd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' OK ] Stopp[ 70.708528] audit: type=1131 audit(1579808941.713:398): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' ed target System[ 70.732217] audit: type=1131 audit(1579808941.736:399): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=import-state comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' Initialization. [ OK ] Stopped t[ 70.757398] audit: type=1131 audit(1579808941.761:400): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-tmpfiles-setup-dev comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' arget Local Encrypted Volumes. [ OK ] Stopped Forward Password Requests to Wall Directory Watch. [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped target Swap.[ 70.783184] audit: type=1131 audit(1579808941.787:401): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-sysusers comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' [ OK ] Stopped Update is Completed. [ OK ] Stopped Rebuild Journal Catalog. [ OK ] Stopped Rebuild Hardware Database. [ OK ] Stopped Rebuild Dynami[ 70.822964] audit: type=1131 audit(1579808941.827:402): pid=1 uid=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:init_t:s0 msg='unit=systemd-remount-fs comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success' c Linker Cache. Stopping Load/Save Random Seed... Stopping Update UTMP about System Boot/Shutdown... [ OK ] Stopped Load/Save Random Seed. [ OK ] Stopped Update UTMP about System Boot/Shutdown. Stopping Security Auditing Service... [ OK ] Stopped Security Auditing Service. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped Import network configuration from initramfs. [ OK ] Stopped target Local File Systems. [ OK ] Stopped target Local File Systems (Pre). Stopping Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create System Users. [ OK ] Stopped Remount Root and Kernel File Systems. [ OK ] Reached target Shutdown. [ OK ] Reached target Final Step. Starting Reboot... [ 70.962291] watchdog: watchdog0: watchdog did not stop! [ 70.968737] systemd-shutdow: 28 output lines suppressed due to ratelimiting [ 70.980234] systemd-shutdown[1]: Syncing filesystems and block devices. [ 71.136834] systemd-shutdown[1]: Sending SIGTERM to remaining processes... [ 71.147279] systemd-journald[578]: Received SIGTERM from PID 1 (systemd-shutdow). [ 71.165790] systemd-shutdown[1]: Sending SIGKILL to remaining processes... [ 71.175230] systemd-shutdown[1]: Hardware watchdog 'iTCO_wdt', version 0 [ 71.182687] systemd-shutdown[1]: Unmounting file systems. [ 71.189151] [18214]: Remounting '/' read-only in with options 'seclabel'. [ 71.276602] EXT4-fs (sda1): re-mounted. Opts: [ 71.282355] systemd-shutdown[1]: All filesystems unmounted. [ 71.288520] systemd-shutdown[1]: Deactivating swaps. [ 71.294082] systemd-shutdown[1]: All swaps deactivated. [ 71.299872] systemd-shutdown[1]: Detaching loop devices. [ 71.305848] systemd-shutdown[1]: All loop devices detached. [ 71.439857] kvm: exiting hardware virtualization [ 71.445480] sd 4:0:0:0: [sda] Synchronizing SCSI cache [ 73.684040] reboot: Restarting system [ 73.688287] reboot: machine restart € € € Initializing Intel(R) Boot Agent XE v2.1.60 PXE 2.1 Build 088 (WfM 2.0)  Press Ctrl+S to enter the Setup Menu.                      Press Ctrl+S to enter the Setup Menu..  € € Initializing Intel(R) Boot Agent XE v2.1.60 PXE 2.1 Build 088 (WfM 2.0)  Press Ctrl+S to enter the Setup Menu.                      Press Ctrl+S to enter the Setup Menu..  € €  el(R) Boot Agent GE v1.5.72 PXE 2.1 Build 092 (WfM 2.0) Press Ctrl+S to enter the Setup Menu.                       Initializing Intel(R) Boot Agent GE v1.5.72 Press Ctrl+S to enter the Setup Menu..  € € € €  Intel(R) Boot Agent XE v2.1.60 Copyright (C) 1997-2009, Intel Corporation  CLIENT MAC ADDR: 0C C4 7A 88 76 FD GUID: 00000000 0000 0000 0000 0CC47AD9426E DHCP.\                    DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ GATEWAY IP: 172.21.15.254 PXE->EB: !PXE at 95D3:0070, entry point at 95D3:0106  UNDI code segment 95D3:3E70, data segment 8E94:73F0 (570-615kB)  UNDI device is PCI 03:00.1, type DIX+802.3  570kB free base memory after PXE unload iPXE initialising devices... CLIENT IP: 172.21.15.146 MASK: 255.255.240.0 DHCP IP: 172.21.0.10 iPXE initialising devices...ok iPXE 1.0.0+ (1b67a) -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS HTTP HTTPS iSCSI TFTP VLAN AoE ELF MBOOT PXE bzImage Menu PXEXT Configuring (net0 0c:c4:7a:88:76:fd)... Configuring (net0 0c:c4:7a:88:76:fd).... Configuring (net0 0c:c4:7a:88:76:fd)..... Configuring (net0 0c:c4:7a:88:76:fd)...... ok .   [?25lUse the ^ and v keys to change the selection. Press 'e' to edit the selected item, or 'c' for a command prompt.   CentOS Linux (4.18.0-147.3.1.el8_1.x86_64) 8 (Core)  CentOS Linux (4.18.0-80.11.2.el8_0.x86_64) 8 (Core)  CentOS Linux (4.18.0-80.el8.x86_64) 8 (Core)  CentOS Linux (0-rescue-54a67e81cff842628a1dd8f3c10ef310) 8 (Core)               CentOS Linux (4.18.0-80.11.2.el8_0.x86_64) 8 (Core)  The selected entry will be started automatically in 5s.  CentOS Linux (4.18.0-80.el8.x86_64) 8 (Core)  CentOS Linux (0-rescue-54a67e81cff842628a1dd8f3c10ef310) 8 (Core)           Use the * and * keys to change the selection.  Press 'e' to edit the selected item, or 'c' for a command prompt.  The selected entry will be started automatically in 5s.   CentOS Linux (4.18.0-147.3.1.el8_1.x86_64) 8 (Core)   The selected entry will be started automatically in 4s.  The selected entry will be started automatically in 4s.  The selected The selected entry will be started automatically in 3s.  The selected entry will be started automatically in 3s.  The selected entry will be started automatically in 2s.  The selected entry will be started automatically in 2s.  The selected entry will be started automatically in 1s.  The selected entry will be started automatically in 1s.  The selected entry will be started automatically in 0s. [?25h       [ 0.000000] Linux version 4.18.0-147.3.1.el8_1.x86_64 (mockbuild@kbuilder.bsys.centos.org) (gcc version 8.3.1 20190507 (Red Hat 8.3.1-4) (GCC)) #1 SMP Fri Jan 3 23:55:26 UTC 2020 [ 0.000000] Command line: BOOT_IMAGE=(hd0,msdos1)/boot/vmlinuz-4.18.0-147.3.1.el8_1.x86_64 root=UUID=a77d5bcf-3ed1-4582-880a-275c282b5a58 ro crashkernel=auto console=ttyS1,115200 console=ttyS1,1152086/fpu: Supportix001: 'x87 floating point registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers' [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers' [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256 [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format. [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000008abff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000078ec8fff] usable [ 0.000000] BIOS-e820: [mem 0x0000000078f78000-0x00000000798a7fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000798a8000-0x0000000079d44fff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x0000000079d45000-0x000000008fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 3.0 present. [ 0.000000] DMI: Supermicro SYS-5018R-WR/X10SRW-F, BIOS 2.0a 08/02/2016 [ 0.000000] last_pfn = 0x880000 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] last_pfn = 0x78ec9 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000fcd40-0x000fcd4f] mapped at [(____ptrval____)] [ 0.000000] Using GB pages for direct mapping [ 0.000000] RAMDISK: [mem 0x35588000-0x36abbfff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 SUPERM) [ 0.000000] ACPI: XSDT 0x00000000798A80A0 0000BC (v01 01072009 AMI 00010013) [ 0.000000] ACPI: FACP 0x00000000798DB838 00010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: DSDT 0x00000000798A81F0 033641 (v02 SUPERM SMCI--MB 01072009 INTL 20091013) [ 0.000000] ACPI: FACS 0x0000000079D43F80 000040 [ 0.000000] ACPI: APIC 0x00000000798DB948 0000C8 (v03 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: FPDT 0x00000000798DBA10 000044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: FIDT 0x00000000798DBA58 00009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013) [ 0.000000] ACPI: SPMI 0x00000000798DBAF8 000040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000) [ 0.000000] ACPI: MCFG 0x00000000798DBB38 00003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097) [ 0.000000] ACPI: UEFI 0x00000000798DBB78 000042 (v01 SUPERM SMCI--MB 01072009 00000000) [ 0.000000] ACPI: HPET 0x00000000798DBBC0 000038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.000000] ACPI: WDDT 0x00000000798DBBF8 000040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013) [ 0.000000] ACPI: SSDT 0x00000000798DBC38 01717F (v02 SUPERM PmMgt 00000001 INTL 20120913) [ 0.000000] ACPI: NITR 0x00000000798F2DB8 000071 (v02 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.000000] ACPI: SSDT 0x00000000798F2E30 00264C (v02 SUPERM SpsNm 00000002 INTL 20120913) [ 0.000000] ACPI: SSDT 0x00000000798F5480 000064 (v02 SUPERM SpsNvs 00000002 INTL 20120913) [ 0.000000] ACPI: PRAD 0x00000000798F54E8 000102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913) [ 0.000000] ACPI: DMAR 0x00000000798F55F0 0000BC (v01 SUPERM SMCI--MB 00000001 INTL 20091013) [ 0.000000] ACPI: HEST 0x00000000798F56B0 00027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: BERT 0x00000000798F5930 000030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: ERST 0x00000000798F5960 000230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] ACPI: EINJ 0x00000000798F5B90 000130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000087fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x87ffd6000-0x87fffffff] [ 0.000000] Using crashkernel=auto, the size chosen is a best effort estimation. [ 0.000000] Reserving 160MB of memory at 1760MB for crashkernel (System RAM: 32654MB) [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000087fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000089fff] [ 0.000000] node 0: [mem 0x0000000000100000-0x0000000078ec8fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000087fffffff] [ 0.000000] Zeroed struct page in unavailable ranges: 29102 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb000020 (or later) [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x0008a000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0x78ec9000-0x78f77fff] [ 0.000000] PM: Registered nosave memory: [mem 0x78f78000-0x798a7fff] [ 0.000000] PM: Registered nosave memory: [mem 0x798a8000-0x79d44fff] [ 0.000000] PM: Registered nosave memory: [mem 0x79d45000-0x8fffffff] [ 0.000000] PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff] [ 0.000000] [mem 0x90000000-0xfed1bfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 47 pages/cpu s155648 r8192 d28672 u262144 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 8228865 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=(hd0,msdos1)/boot/vmlinuz-4.18.0-147.3.1.el8_1.x86_64 root=UUID=a77d5bcf-3ed1-4582-880a-275c282b5a58 ro crashkernel=auto console=ttyS1,115200 console=tty0 console=ttyS1,115200 [ 0.000000] Specific versions of hardware are certified with Red Hat Enterprise Linux 8. Please see the list of hardware certified with Red Hat Enterprise Linux 8 at https://access.redhat.com/ecosystem. [ 0.000000] Memory: 1860644K/33438024K available (12292K kernel code, 2117K rwdata, 3780K rodata, 2368K init, 6348K bss, 810600K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 35730 entries in 140 pages [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 896, preallocated irqs: 16 [ 0.000000] random: get_random_bytes called from start_kernel+0x36b/0x55b with crng_init=0 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] console [ttyS1] enabled [ 0.000000] ACPI: Core revision 20180531 [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.001000] DMAR: Host address width 46 [ 0.002000] DMAR: DRHD base: 0x000000fbffc000 flags: 0x1 [ 0.003000] DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de [ 0.004000] DMAR: RMRR base: 0x0000007ba6e000 end: 0x0000007ba7dfff [ 0.005000] DMAR: ATSR flags: 0x0 [ 0.006000] DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0 [ 0.007000] DMAR-IR: IOAPIC id 1 under DRHD base 0xfbffc000 IOMMU 0 [ 0.008000] DMAR-IR: IOAPIC id 2 under DRHD base 0xfbffc000 IOMMU 0 [ 0.009000] DMAR-IR: HPET id 0 under DRHD base 0xfbffc000 [ 0.010000] DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit. [ 0.010000] DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting. [ 0.012000] DMAR-IR: Enabled IRQ remapping in xapic mode [ 0.012000] x2apic: IRQ remapping doesn't support X2APIC mode [ 0.014000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.019000] tsc: Fast TSC calibration using PIT [ 0.020000] tsc: Detected 3499.727 MHz processor [ 0.021000] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x32724efed25, max_idle_ns: 440795209572 ns [ 0.022001] Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.45 BogoMIPS (lpj=3499727) [ 0.023001] pid_max: default: 32768 minimum: 301 [ 0.024018] Security Framework initialized [ 0.025000] Yama: becoming mindful. [ 0.026003] SELinux: Initializing. [ 0.032245] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes) [ 0.035980] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.036081] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.037074] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.038191] CPU0: Thermal monitoring enabled (TM1) [ 0.039035] process: using mwait in idle threads [ 0.040002] Last level iTLB entries: 4KB 64, 2MB 8, 4MB 8 [ 0.041000] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4 [ 0.042001] FEATURE SPEC_CTRL Not Present [ 0.043000] FEATURE IBPB_SUPPORT Not Present [ 0.044001] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.045001] Spectre V2 : Mitigation: Full generic retpoline [ 0.046000] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.047000] Speculative Store Bypass: Vulnerable [ 0.048019] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.049000] TAA: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.053791] Freeing SMP alternatives memory: 32K [ 0.056000] smpboot: CPU0: Intel(R) Xeon(R) CPU E5-1620 v4 @ 3.50GHz (family: 0x6, model: 0x4f, stepping: 0x1) [ 0.056066] Performance Events: PEBS fmt2+, Broadwell events, 16-deep LBR, full-width counters, Intel PMU driver. [ 0.057002] ... version: 3 [ 0.058000] ... bit width: 48 [ 0.059000] ... generic registers: 4 [ 0.060000] ... value mask: 0000ffffffffffff [ 0.061000] ... max period: 00007fffffffffff [ 0.062000] ... fixed-purpose events: 3 [ 0.063000] ... event mask: 000000070000000f [ 0.064027] rcu: Hierarchical SRCU implementation. [ 0.065742] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.066014] smp: Bringing up secondary CPUs ... [ 0.068017] x86: Booting SMP configuration: [ 0.069001] .... node #0, CPUs: #1 #2 #3 #4 [ 0.071644] MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details. [ 0.073001] TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details. [ 0.074073] #5 #6 #7 [ 0.075516] smp: Brought up 1 node, 8 CPUs [ 0.077001] smpboot: Max logical packages: 1 [ 0.078001] smpboot: Total of 8 processors activated (55995.63 BogoMIPS) [ 0.287007] node 0 initialised, 7691695 pages in 207ms [ 0.293646] devtmpfs: initialized [ 0.294041] x86/mm: Memory block size: 128MB [ 0.296429] PM: Registering ACPI NVS region [mem 0x798a8000-0x79d44fff] (4837376 bytes) [ 0.297083] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns [ 0.307013] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.314076] pinctrl core: initialized pinctrl subsystem [ 0.320236] NET: Registered protocol family 16 [ 0.325069] audit: initializing netlink subsys (disabled) [ 0.330010] audit: type=2000 audit(1579809023.330:1): state=initialized audit_enabled=0 res=1 [ 0.340002] cpuidle: using governor menu [ 0.344030] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it [ 0.352001] ACPI: bus type PCI registered [ 0.356001] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.363049] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000) [ 0.373002] PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820 [ 0.380010] PCI: Using configuration type 1 for base access [ 0.387622] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages [ 0.394002] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.401021] cryptd: max_cpu_qlen set to 1000 [ 0.406071] ACPI: Added _OSI(Module Device) [ 0.411001] ACPI: Added _OSI(Processor Device) [ 0.415001] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.420001] ACPI: Added _OSI(Processor Aggregator Device) [ 0.426001] ACPI: Added _OSI(Linux-Dell-Video) [ 0.455109] ACPI: 4 ACPI AML tables successfully acquired and loaded [ 0.465316] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored [ 0.478085] ACPI: Dynamic OEM Table Load: [ 0.495143] ACPI: Interpreter enabled [ 0.499011] ACPI: (supports S0 S4 S5) [ 0.503001] ACPI: Using IOAPIC for interrupt routing [ 0.509018] HEST: Enabling Firmware First mode for corrected errors. [ 0.515063] HEST: Table parsing has been initialized. [ 0.521002] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.531330] ACPI: Enabled 5 GPEs in block 00 to 3F [ 0.556328] ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff]) [ 0.563004] acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.572725] acpi PNP0A03:03: _OSC: platform does not support [SHPCHotplug AER LTR] [ 0.581416] acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 0.590001] acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.599026] PCI host bridge to bus 0000:ff [ 0.603001] pci_bus 0000:ff: root bus resource [bus ff] [ 0.612289] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) [ 0.619003] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.628178] acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug AER LTR] [ 0.636155] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME PCIeCapability] [ 0.645001] acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration [ 0.654199] PCI host bridge to bus 0000:00 [ 0.659002] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.666001] pci_bus 0000:00: root bus resource [io 0x1000-0xffff window] [ 0.673001] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.682001] pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f window] [ 0.690001] pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f window] [ 0.698001] pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window] [ 0.706001] pci_bus 0000:00: root bus resource [bus 00-fe] [ 0.714719] acpiphp: Slot [1] registered [ 0.719015] pci 0000:00:01.0: PCI bridge to [bus 01] [ 0.725135] pci 0000:02:00.0: enabling Extended Tags [ 0.730073] pci 0000:00:02.0: PCI bridge to [bus 02] [ 0.735191] pci 0000:03:00.0: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 0.746009] pci 0000:03:00.0: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 0.757187] pci 0000:03:00.1: VF(n) BAR0 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR0 for 64 VFs) [ 0.768009] pci 0000:03:00.1: VF(n) BAR3 space: [mem 0x00000000-0x000fffff 64bit pref] (contains BAR3 for 64 VFs) [ 0.779079] pci 0000:00:03.0: PCI bridge to [bus 03] [ 0.785033] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 0.790126] pci 0000:05:00.0: enabling Extended Tags [ 0.795156] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 0.801052] pci_bus 0000:06: extended config space not accessible [ 0.808260] pci 0000:05:00.0: PCI bridge to [bus 06] [ 0.813189] pci 0000:07:00.0: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.824022] pci 0000:07:00.0: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.835287] pci 0000:07:00.1: VF(n) BAR0 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR0 for 8 VFs) [ 0.846022] pci 0000:07:00.1: VF(n) BAR3 space: [mem 0x00000000-0x0001ffff 64bit pref] (contains BAR3 for 8 VFs) [ 0.857119] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 0.862008] pci 0000:00:1c.4: bridge has subordinate 07 but max busn 08 [ 0.869449] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 0.877030] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 0.885029] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15) [ 0.892029] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 *11 12 14 15) [ 0.899029] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.908029] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.917029] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.925030] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled. [ 0.934079] pci 0000:06:00.0: vgaarb: setting as boot VGA device [ 0.935000] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.950002] pci 0000:06:00.0: vgaarb: bridge control possible [ 0.956001] vgaarb: loaded [ 0.959055] SCSI subsystem initialized [ 0.963014] ACPI: bus type USB registered [ 0.968011] usbcore: registered new interface driver usbfs [ 0.973005] usbcore: registered new interface driver hub [ 0.979016] usbcore: registered new device driver usb [ 0.984018] pps_core: LinuxPPS API ver. 1 registered [ 0.990001] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.999002] PTP clock support registered [ 1.004015] EDAC MC: Ver: 3.0.0 [ 1.007100] PCI: Using ACPI for IRQ routing [ 1.017509] NetLabel: Initializing [ 1.021001] NetLabel: domain hash size = 128 [ 1.026000] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.032010] NetLabel: unlabeled traffic allowed by default [ 1.038037] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 [ 1.044001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 1.052020] clocksource: Switched to clocksource tsc-early [ 1.066113] VFS: Disk quotas dquot_6.6.0 [ 1.070383] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.077628] pnp: PnP ACPI init [ 1.081311] system 00:01: [io 0x0500-0x057f] has been reserved [ 1.087563] system 00:01: [io 0x0400-0x047f] has been reserved [ 1.093809] system 00:01: [io 0x0580-0x059f] has been reserved [ 1.100060] system 00:01: [io 0x0600-0x061f] has been reserved [ 1.106306] system 00:01: [io 0x0880-0x0883] has been reserved [ 1.112558] system 00:01: [io 0x0800-0x081f] has been reserved [ 1.118806] system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved [ 1.125751] system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved [ 1.132695] system 00:01: [mem 0xff000000-0xffffffff] has been reserved [ 1.147411] system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved [ 1.154354] system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved [ 1.161296] system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved [ 1.168239] system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved [ 1.175312] system 00:02: [io 0x0a00-0x0a0f] has been reserved [ 1.181560] system 00:02: [io 0x0a10-0x0a1f] has been reserved [ 1.187808] system 00:02: [io 0x0a20-0x0a2f] has been reserved [ 1.194057] system 00:02: [io 0x0a30-0x0a3f] has been reserved [ 1.200307] system 00:02: [io 0x0a40-0x0a4f] has been reserved [ 1.207200] pnp: PnP ACPI: found 5 devices [ 1.216921] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.226412] pci 0000:00:1c.4: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref] [ 1.234842] pci 0000:00:01.0: PCI bridge to [bus 01] [ 1.240136] pci 0000:00:02.0: PCI bridge to [bus 02] [ 1.245429] pci 0000:00:02.0: bridge window [mem 0xfb300000-0xfb3fffff] [ 1.252553] pci 0000:03:00.0: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 1.260721] pci 0000:03:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 1.269232] pci 0000:03:00.0: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 1.277482] pci 0000:03:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 1.286083] pci 0000:03:00.1: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 1.294244] pci 0000:03:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 1.302759] pci 0000:03:00.1: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 1.311010] pci 0000:03:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 1.319608] pci 0000:03:00.0: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 1.327773] pci 0000:03:00.0: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 1.336285] pci 0000:03:00.0: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 1.344536] pci 0000:03:00.0: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 1.353135] pci 0000:03:00.1: BAR 7: no space for [mem size 0x00100000 64bit pref] [ 1.361298] pci 0000:03:00.1: BAR 7: failed to assign [mem size 0x00100000 64bit pref] [ 1.369812] pci 0000:03:00.1: BAR 10: no space for [mem size 0x00100000 64bit pref] [ 1.378061] pci 0000:03:00.1: BAR 10: failed to assign [mem size 0x00100000 64bit pref] [ 1.386661] pci 0000:00:03.0: PCI bridge to [bus 03] [ 1.391954] pci 0000:00:03.0: bridge window [io 0xe000-0xefff] [ 1.398378] pci 0000:00:03.0: bridge window [mem 0xfb200000-0xfb2fffff] [ 1.405496] pci 0000:00:03.0: bridge window [mem 0xfbd00000-0xfbefffff 64bit pref] [ 1.413833] pci 0000:00:1c.0: PCI bridge to [bus 04] [ 1.419132] pci 0000:05:00.0: PCI bridge to [bus 06] [ 1.424430] pci 0000:05:00.0: bridge window [io 0xd000-0xdfff] [ 1.430858] pci 0000:05:00.0: bridge window [mem 0xfa000000-0xfb0fffff] [ 1.437988] pci 0000:00:1c.2: PCI bridge to [bus 05-06] [ 1.443543] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.449968] pci 0000:00:1c.2: bridge window [mem 0xfa000000-0xfb0fffff] [ 1.457088] pci 0000:07:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref] [ 1.465435] pci 0000:07:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref] [ 1.473867] pci 0000:07:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref] [ 1.482214] pci 0000:07:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref] [ 1.490646] pci 0000:00:1c.4: PCI bridge to [bus 07] [ 1.495944] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 1.502371] pci 0000:00:1c.4: bridge window [mem 0xfb100000-0xfb1fffff] [ 1.509490] pci 0000:00:1c.4: bridge window [mem 0x90000000-0x900fffff 64bit pref] [ 1.517836] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc [ 1.527587] NET: Registered protocol family 2 [ 1.532433] tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes) [ 1.541123] TCP established hash table entries: 262144 (order: 9, 2097152 bytes) [ 1.549365] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.556508] TCP: Hash tables configured (established 262144 bind 65536) [ 1.563487] UDP hash table entries: 16384 (order: 7, 524288 bytes) [ 1.570069] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes) [ 1.577110] NET: Registered protocol family 1 [ 1.581816] NET: Registered protocol family 44 [ 1.603131] pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x6c5 took 15939 usecs [ 1.627123] pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x6c5 took 15605 usecs [ 1.635141] pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.644112] Unpacking initramfs... [ 1.865925] Freeing initrd memory: 21712K [ 1.880018] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.886792] software IO TLB: mapped [mem 0x6a000000-0x6e000000] (64MB) [ 1.894955] Initialise system trusted keyrings [ 1.899733] Key type blacklist registered [ 1.904089] workingset: timestamp_bits=36 max_order=23 bucket_order=0 [ 1.911799] zbud: loaded [ 1.914890] pstore: using deflate compression [ 1.919821] Platform Keyring initialized [ 1.952673] NET: Registered protocol family 38 [ 1.957446] Key type asymmetric registered [ 1.961872] Asymmetric key parser 'x509' registered [ 1.967088] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 1.975102] io scheduler mq-deadline registered [ 1.979959] io scheduler kyber registered [ 1.984324] io scheduler bfq registered [ 1.988539] atomic64_test: passed for x86-64 platform with CX8 and with SSE [ 1.996089] pcieport 0000:00:01.0: Signaling PME with IRQ 25 [ 2.002217] pcieport 0000:00:02.0: Signaling PME with IRQ 27 [ 2.008338] pcieport 0000:00:03.0: Signaling PME with IRQ 29 [ 2.014441] pcieport 0000:00:1c.0: Signaling PME with IRQ 30 [ 2.020553] pcieport 0000:00:1c.2: Signaling PME with IRQ 31 [ 2.026660] pcieport 0000:00:1c.4: Signaling PME with IRQ 32 [ 2.032726] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 2.040165] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.049123] ACPI: Power Button [PWRB] [ 2.053134] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.061135] ACPI: Power Button [PWRF] [ 2.066146] ERST: Error Record Serialization Table (ERST) support is initialized. [ 2.074257] pstore: Registered erst as persistent store backend [ 2.080659] GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC. [ 2.088741] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 2.115921] 00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.144447] 00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.152655] Non-volatile memory driver v1.3 [ 2.157606] rdac: device handler registered [ 2.162158] hp_sw: device handler registered [ 2.166755] emc: device handler registered [ 2.171231] alua: device handler registered [ 2.175764] libphy: Fixed MDIO Bus: probed [ 2.180246] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.187103] ehci-pci: EHCI PCI platform driver [ 2.191983] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.197574] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.205573] ehci-pci 0000:00:1a.0: debug port 2 [ 2.214332] ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb434000 [ 2.227061] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.233162] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.242022] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.249836] usb usb1: Product: EHCI Host Controller [ 2.255043] usb usb1: Manufacturer: Linux 4.18.0-147.3.1.el8_1.x86_64 ehci_hcd [ 2.262864] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.267878] hub 1-0:1.0: USB hub found [ 2.271965] hub 1-0:1.0: 2 ports detected [ 2.276469] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.282052] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.290054] ehci-pci 0000:00:1d.0: debug port 2 [ 2.298807] ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb433000 [ 2.311038] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.317140] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.326002] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.333825] usb usb2: Product: EHCI Host Controller [ 2.339032] usb usb2: Manufacturer: Linux 4.18.0-147.3.1.el8_1.x86_64 ehci_hcd [ 2.346851] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.351865] hub 2-0:1.0: USB hub found [ 2.355952] hub 2-0:1.0: 2 ports detected [ 2.360394] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.366916] ohci-pci: OHCI PCI platform driver [ 2.371699] uhci_hcd: USB Universal Host Controller Interface driver [ 2.378502] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.384101] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3 [ 2.400919] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x0000000000009810 [ 2.410776] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.18 [ 2.419636] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.427459] usb usb3: Product: xHCI Host Controller [ 2.432666] usb usb3: Manufacturer: Linux 4.18.0-147.3.1.el8_1.x86_64 xhci-hcd [ 2.440489] usb usb3: SerialNumber: 0000:00:14.0 [ 2.445491] hub 3-0:1.0: USB hub found [ 2.449587] hub 3-0:1.0: 15 ports detected [ 2.455110] xhci_hcd 0000:00:14.0: xHCI Host Controller [ 2.460688] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4 [ 2.468686] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed [ 2.475391] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 4.18 [ 2.484252] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.492068] usb usb4: Product: xHCI Host Controller [ 2.497272] usb usb4: Manufacturer: Linux 4.18.0-147.3.1.el8_1.x86_64 xhci-hcd [ 2.505095] usb usb4: SerialNumber: 0000:00:14.0 [ 2.510103] hub 4-0:1.0: USB hub found [ 2.514194] hub 4-0:1.0: 6 ports detected [ 2.519131] usbcore: registered new interface driver usbserial_generic [ 2.526002] usbserial: USB Serial support registered for generic [ 2.532363] i8042: PNP: No PS/2 controller found. [ 2.537442] mousedev: PS/2 mouse device common for all mice [ 2.543424] rtc_cmos 00:00: RTC can wake from S4 [ 2.548510] rtc_cmos 00:00: registered as rtc0 [ 2.553295] rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.561556] intel_pstate: Intel P-state driver initializing [ 2.568150] hidraw: raw HID events driver (C) Jiri Kosina [ 2.573900] usbcore: registered new interface driver usbhid [ 2.579807] usbhid: USB HID core driver [ 2.584037] drop_monitor: Initializing network drop monitor service [ 2.590673] Initializing XFRM netlink socket [ 2.595340] NET: Registered protocol family 10 [ 2.600331] Segment Routing with IPv6 [ 2.604334] NET: Registered protocol family 17 [ 2.609163] mpls_gso: MPLS GSO support [ 2.613633] core: Using 22 MCE banks [ 2.617589] microcode: sig=0x406f1, pf=0x1, revision=0xb00001b [ 2.623834] microcode: Microcode Update Driver: v2.2. [ 2.623921] resctrl: L3 allocation detected [ 2.633031] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.633819] resctrl: L3DATA allocation detected [ 2.645537] resctrl: L3CODE allocation detected [ 2.650403] resctrl: L3 monitoring detected [ 2.654919] AVX2 version of gcm_enc/dec engaged. [ 2.659866] AES CTR mode by8 optimization enaled [ 2.674478] sched_clock: Marking stable (2674472623, 0)->(3115870440, -441397817) [ 2.682776] registered taskstats version 1 [ 2.687233] Loading compiled-in X.509 certificates [ 2.716780] Loaded X.509 cert 'CentOS Linux kernel signing key: d62974f0fbc69e2e8cf4792390e2882ba9897557' [ 2.726993] Loaded X.509 cert 'CentOS Linux Driver update signing key: 29bd4c0d06d2e9911044b5dc973309139b51d6d5' [ 2.737784] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.741050] Loaded X.509 cert 'CentOS Linux kpatch signing key: b49f086205909dc4da2cfa99376fb191d2f09e78' [ 2.754858] zswap: loaded using pool lzo/zbud [ 2.762729] Key type big_key registered [ 2.768405] usb 1-1: New USB device found, idVendor=8087, idProduct=800a, bcdDevice= 0.05 [ 2.768451] Key type encrypted registered [ 2.777195] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.777291] hub 1-1:1.0: USB hub found [ 2.781558] ima: No TPM chip found, activating TPM-bypass! [ 2.789053] usb 3-12: new high-speed USB device number 2 using xhci_hcd [ 2.793149] ima: Allocated hash algorithm: sha1 [ 2.799032] hub 1-1:1.0: 6 ports detected [ 2.805953] evm: Initialising EVM extended attributes: [ 2.820650] evm: security.selinux [ 2.824327] evm: security.ima [ 2.827634] evm: security.capability [ 2.831556] evm: HMAC attrs: 0x1 [ 2.835505] rtc_cmos 00:00: setting system clock to 2020-01-23 19:50:27 UTC (1579809027) [ 2.845473] Freeing unused decrypted memory: 2040K [ 2.877411] usb 2-1: New USB device found, idVendor=8087, idProduct=8002, bcdDevice= 0.05 [ 2.886208] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.893826] hub 2-1:1.0: USB hub found [ 2.898039] hub 2-1:1.0: 8 ports detected [ 2.911037] tsc: Refined TSC clocksource calibration: 3499.996 MHz [ 2.917565] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x32734d20948, max_idle_ns: 440795306379 ns [ 3.176696] Freeing unused kernel memory: 2368K [ 3.181567] clocksource: Switched to clocksource tsc [ 3.188030] Write protecting the kernel read-only data: 18432k [ 3.195016] Freeing unused kernel memory: 2020K [ 3.198198] usb 3-12: New USB device found, idVendor=0557, idProduct=7000, bcdDevice= 0.00 [ 3.208760] usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.216606] Freeing unused kernel memory: 316K [ 3.216848] hub 3-12:1.0: USB hub found [ 3.225658] hub 3-12:1.0: 4 ports detected [ 3.230199] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 3.264136] systemd[1]: Detected architecture x86-64. [ 3.269524] systemd[1]: Running in initial RAM disk. Welcome to CentOS Linux 8 (Core) dracut-049-10.git20190115.el8_0.1 (Initramfs)! [ 3.286041] systemd[1]: Set hostname to . [ 3.321834] random: systemd: uninitialized urandom read (16 bytes read) [ 3.328788] systemd[1]: Reached target Slices. [ OK ] Reached target Slices. [ 3.339149] random: systemd: uninitialized urandom read (16 bytes read) [ 3.346177] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 3.359114] random: systemd: uninitialized urandom read (16 bytes read) [ 3.366074] systemd[1]: Reached target Swap. [ OK ] Reached target Swap. [ 3.376290] systemd[1]: Listening on Journal Socket. [ OK ] Listening on Journal Socket. [ 3.389036] systemd[1]: Starting Apply Kernel Variables... Starting Apply Kernel Variables... [ 3.400616] systemd[1]: Starting Journal Service... Starting Journal Service... [ OK ] Listening on udev Kernel Socket. [ OK ] Reached target Local File Systems. Starting Create Volatile Files and Directories... Starting Create list of required st…ce nodes for the current kernel... Starting S[ OK ] Listening on udev Control Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Timers. [ OK ] Started Journal Service. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create Volatile Files and Directories. [ OK ] Started Create list of required sta…vice nodes for the cur[ 3.523037] usb 3-12.1: new low-speed USB device number 3 using xhci_hcd rent kernel. [[0; OK ] Start Startincut cmdline hook... Starting Create Static Device Nodes in /dev... [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Started dracut cmdline hook. Starting dracut pre-udev hook... [ OK ] Started dracut pre-udev hook. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. Startin. [ 3.634312] usb 3-12.1: New USB device found, idVendor=0557, idProduct=2419, bcdDevice= 1.00 [ 3.643389] usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 Mounting Kernel Configuration File System... [ 3.65 HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/0003:0557:2419.0001/input/input2 [ OK ] Mounted Kernel Configuration File System. [ OK ] Started udev Coldplug all De3] hid-generic 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-12.1/input0 vices. [ 3.734236] input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/0003:0557:2419.0002/input/input3 [ 3.746584] hid-generic 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-12.1/input1 [ 3.746591] dca service started, version 1.12.1 Starting Show Plymouth Boot Screen... [ 3.788026] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k [ 3.789193] nvme nvme0: pci function 0000:02:00.0 [ 3.795330] igb: Copyright (c) 2007-2014 Intel Corporation. [ OK ] Reached targ[ 3.807358] ahci 0000:00:11.4: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0xf impl SATA mode et System Initia[ 3.817455] ahci 0000:00:11.4: flags: 64bit ncq pm led clo pio slum part ems apst lization. [ 3.827210] scsi host0: ahci Starting dr[ 3.827295] scsi host1: ahci acut initqueue h[ 3.827366] scsi host2: ahci ook... [[0;32[ 3.827440] scsi host3: ahci m OK ] Sta[ 3.843931] ata1: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438100 irq 35 rted Show Plymou[ 3.843934] ata2: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438180 irq 35 th Boot Screen. [ 3.843936] ata3: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438200 irq 35 [ OK [ 3.843938] ata4: SATA max UDMA/133 abar m2048@0xfb438000 port 0xfb438280 irq 35 ] Reached ta[ 3.844168] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode rget Paths. [ OK ] Started Forwar[ 3.888839] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst d Password Reque[ 3.900796] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k-rh8.1.0 sts to Plymouth [ 3.900797] ixgbe: Copyright (c) 1999-2016 Intel Corporation. Directory Watch.[ 3.903521] nvme nvme0: 8/0/0 default/read/poll queues [ OK ] Reached target Basic System. [ 3.935316] scsi host4: ahci [ 3.938627] scsi host5: ahci [ 3.941937] scsi host6: ahci [ 3.947828] igb 0000:07:00.0: added PHC on eth0 [ 3.952694] igb 0000:07:00.0: Intel(R) Gigabit Ethernet Network Connection [ 3.959902] igb 0000:07:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:d9:42:6e [ 3.967450] igb 0000:07:00.0: eth0: PBA No: 050B00-000 [ 3.972918] igb 0000:07:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 3.981135] scsi host7: ahci [ 3.981230] scsi host8: ahci [ 3.981861] scsi host9: ahci [ 3.981898] ata5: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432100 irq 45 [ 3.981899] ata6: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432180 irq 45 [ 3.981901] ata7: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432200 irq 45 [ 3.981903] ata8: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432280 irq 45 [ 3.981905] ata9: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432300 irq 45 [ 3.981907] ata10: SATA max UDMA/133 abar m2048@0xfb432000 port 0xfb432380 irq 45 [ 3.981960] [drm] Using P2A bridge for configuration [ 3.981965] [drm] AST 2400 detected [ 3.981988] [drm] Analog VGA only [ 3.982013] [drm] dram MCLK=408 Mhz type=1 bus_width=16 size=01000000 [ 3.982083] [TTM] Zone kernel: Available graphics memory: 16327956 kiB [ 3.982083] [TTM] Zone dma32: Available graphics memory: 2097152 kiB [ 3.982084] [TTM] Initializing pool allocator [ 3.982087] [TTM] Initializing DMA pool allocator [ 4.036373] igb 0000:07:00.1: added PHC on eth1 [ 4.125957] igb 0000:07:00.1: Intel(R) Gigabit Ethernet Network Connection [ 4.125958] igb 0000:07:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:d9:42:6f [ 4.126052] igb 0000:07:00.1: eth1: PBA No: 050B00-000 [ 4.126053] igb 0000:07:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s) [ 4.126063] fbcon: astdrmfb (fb0) is primary device [ 4.149192] ata4: SATA link down (SStatus 0 SControl 300) [ 4.149699] ata2: SATA link down (SStatus 0 SControl 300) [ 4.149730] ata3: SATA link down (SStatus 0 SControl 300) [ 4.151009] igb 0000:07:00.0 eno1: renamed from eth0 [ 4.165160] ata1: SATA link down (SStatus 0 SControl 300) [ 4.171117] Console: switching to colour frame buffer device 128x48 [ 4.253169] ast 0000:06:00.0: fb0: astdrmfb frame buffer device [ 4.261993] [drm] Initialized ast 0.1.0 20120228 for 0000:06:00.0 on minor 0 [ 4.262152] igb 0000:07:00.1 eno2: renamed from eth1 [ 4.297232] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300) [ 4.303446] ata10: SATA link down (SStatus 0 SControl 300) [ 4.308961] ata7: SATA link down (SStatus 0 SControl 300) [ 4.314375] ata6: SATA link down (SStatus 0 SControl 300) [ 4.319803] ata8: SATA link down (SStatus 0 SControl 300) [ 4.325256] ata9: SATA link down (SStatus 0 SControl 300) [ 4.386761] ata5.00: NCQ Send/Recv Log not supported [ 4.391740] ata5.00: ATA-9: ST1000NM0033-9ZM173, SN06, max UDMA/133 [ 4.398016] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA [ 4.406440] ata5.00: NCQ Send/Recv Log not supported [ 4.411807] ata5.00: configured for UDMA/133 [ 4.416607] scsi 4:0:0:0: Direct-Access ATA ST1000NM0033-9ZM SN06 PQ: 0 ANSI: 5 [ 4.431054] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 4.439155] sd 4:0:0:0: [sda] Write Protect is off [ 4.444412] sd 4:0:0:0: [sda]nabled, read cacupport DPO or FU[ 4.472151] sda: sda1 [ 4.475160] sd 4:0:0:0: [sda] Attached SCSI disk [ OK ] Found device ST1000NM0033-9ZM173 1. [ OK ] Reached target Initrd Root Device. [ 5.060269] ixgbe 0000:03:00.0: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 5.070948] ixgbe 0000:03:00.0: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) [ 5.079250] ixgbe 0000:03:00.0: MAC: 2, PHY: 1, PBA No: 0210FF-0FF [ 5.085817] ixgbe 0000:03:00.0: 0c:c4:7a:88:76:fc [ 5.093028] ixgbe 0000:03:00.0: Intel(R) 10 Gigabit Network Connection [ 5.100016] libphy: ixgbe-mdio: probed [ 5.261108] ixgbe 0000:03:00.1: Multiqueue Enabled: Rx Queue count = 8, Tx Queue count = 8 XDP Queue count = 0 [ 5.271788] ixgbe 0000:03:00.1: 32.000 Gb/s available PCIe bandwidth (5 GT/s x8 link) [ 5.280101] ixgbe 0000:03:00.1: MAC: 2, PHY: 14, SFP+: 4, PBA No: 0210FF-0FF [ 5.287549] ixgbe 0000:03:00.1: 0c:c4:7a:88:76:fd [ 5.295584] ixgbe 0000:03:00.1: Intel(R) 10 Gigabit Network Connection [ 5.302532] libphy: ixgbe-mdio: probed [ 5.307629] ixgbe 0000:03:00.0 enp3s0f0: renamed from eth0 [ 5.319070] ixgbe 0000:03:00.1 enp3s0f1: renamed from eth1 [ OK ] Started dracut initqueue hook. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting File System Check on /dev/…bcf-3ed1-4582-880a-275c282b5a58... [ OK ] Started File System Check on /dev/d…d5bcf-3ed1-4582-880a-275c282b5a58. [ 5.462547] random: fast init done Mounting /sysroot... [ 5.530435] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ OK ] Mounted /sysroot. [ OK ] Reached target Initrd Root File System. Starting Reload Configuration from the Real Root... [ OK ] Started Reload Configuration from the Real Root. [ OK ] Reached target Initrd File Systems. [ OK ] Reached target Initrd Default Target. Starting dracut pre-pivot and cleanup hook... [ OK ] Started dracut pre-pivot and cleanup hook. Starting Cleaning Up and Shutting Down Daemons... [ OK ] Stopped target Timers. [ OK ] Stopped dracut pre-pivot and cleanup hook. [ OK ] Stopped target Initrd Default Target. [ OK ] Stopped target Initrd Root Device. [ OK ] Stopped target Basic System. [ OK ] Stopped target Sockets. [ OK ] Stopped target Paths. Starting Plymouth switch root service... [ OK ] Stopped target Slices. [ OK ] Stopped target Remote File Systems. [ OK ] Stopped target Remote File Systems (Pre). [ OK ] Stopped dracut initqueue hook. [ OK ] Stopped target System Initialization. [ OK ] Stopped Create Volatile Files and Directories. [ OK ] Stopped udev Coldplug all Devices. [ OK ] Stopped target Swap. Stopping udev Kernel Device Manager... [ OK ] Stopped Apply Kernel Variables. [ OK ] Stopped target Local File Systems. Starting Setup Virtual Console... [ OK ] Stopped udev Kernel Device Manager. [ OK ] Started Cleaning Up and Shutting Down Daemons. [ OK ] Stopped Create Static Device Nodes in /dev. [ OK ] Stopped Create list of required sta…vice nodes for the current kernel. [ OK ] Stopped dracut pre-udev hook. [ OK ] Stopped dracut cmdline hook. [ OK ] Closed udev Control Socket. [ OK ] Closed udev Kernel Socket. Starting Cleanup udevd DB... [ OK ] Started Plymouth switch root service. [ OK ] Started Cleanu[ 5.975398] systemd-journald[237]: Received SIGTERM from PID 1 (systemd). p udevd DB. [ OK ] Started Setup Virtual Console. [ OK ] Reached target Switch Root. Starting Switch Root... [ 6.106011] systemd: 9 output lines suppressed due to ratelimiting [ 6.240524] random: crng init done [ 6.244295] random: 7 urandom warning(s) missed due to ratelimiting [ 6.975620] SELinux: Class bpf not defined in policy. [ 6.981082] SELinux: Class xdp_socket not defined in policy. [ 6.987134] SELinux: the above unknown classes and permissions will be allowed [ 6.994660] SELinux: policy capability network_peer_controls=1 [ 7.000879] SELinux: policy capability open_perms=1 [ 7.006145] SELinux: policy capability extended_socket_class=1 [ 7.012363] SELinux: policy capability always_check_network=0 [ 7.018494] SELinux: policy capability cgroup_seclabel=1 [ 7.024184] SELinux: policy capability nnp_nosuid_transition=1 [ 7.051785] audit: type=1403 audit(1579809031.715:2): auid=4294967295 ses=4294967295 lsm=selinux res=1 [ 7.053563] systemd[1]: Successfully loaded SELinux policy in 479.994ms. [ 7.225706] systemd[1]: Relabelled /dev, /run and /sys/fs/cgroup in 19.293ms. [ 7.255879] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 7.289146] systemd[1]: Detected architecture x86-64. Welcome to CentOS Linux 8 (Core)! [ 7.301887] systemd[1]: Set hostname to . [ 8.074173] systemd[1]: Stopped Switch Root. [ OK ] Stopped Switch Root. [ 8.079367] systemd[1]: systemd-journald.service: Service has no hold-off time (RestartSec=0), scheduling restart. [ 8.079419] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1. [ 8.079470] systemd[1]: Stopped Journal Service. [ 8.121549] systemd[1]: Starting Journal Service... [ 8.143219] systemd[1]: Created slice system-getty.slice. [ 8.173169] systemd[1]: Mounting POSIX Message Queue File System... [ OK ] Stopped Journal Service. Starting Journal Service... [ OK ] Created slice system-getty.slice. Mounting POSIX Message Queue File System... [ OK ] Listening on LVM2 poll daemon socket. Starting Remount Root and Kernel File Systems... [ OK ] Reached target Remote File Systems. [ OK ] Created slice system-sshd\x2dkeygen.slice. Mounting Kernel Debug File System... [ OK ] Listening on initctl Compatibility Named Pipe. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Reached target Paths. [ OK ] Listening on udev Kernel Socket. [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. Starting Apply Kernel Variables... [ OK ] Listening on Process Core Dump Socket. [ OK ] Stopped target Switch Root. [ OK ] Stopped target Initrd File Systems. [ OK ] Stopped target Initrd Root File System. [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Swap. Starting Setup Virtual Console... [ 8.385425] EXT4-fs (sda1): re-mounted. Opts: (null) Starting Create list of required st…ce nodes for the current kernel... [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Listening on udev Control Socket. Starting udev Coldplug all Devices... Mounting Huge Pages File System... [ OK ] Started Journal Service. [ OK ] Mounted POSIX Message Queue File System. [ OK ] Started Remount Root and Kernel File Systems. [ 8.470352] systemd-journald[573]: Received request to flush runtime journal from PID 1 [ OK ] Mounted Kernel Debug File System. [ OK ] Started Apply Kernel Variables. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Mounted Huge Pages File System. Starting Load/Save Random Seed... Starting Create Static Device Nodes in /dev... Starting Flush Journal to Persistent Storage... [ OK ] Started Load/Save Random Seed. [ OK ] Started Flush Journal to Persistent Storage. [ OK ] Started udev Coldplug all Devices. [ OK ] Started Setup Virtual Console. [ OK ] Started Create Static Device Nodes in /dev. Starting udev Kernel Device Manager... [ OK ] Started udev Kernel Device Manager. [ 8.890749] ioatdma: Intel(R) QuickData Technology Driver 4.00 [ 8.907518] igb 0000:07:00.0: DCA enabled [ 8.912371] igb 0000:07:00.1: DCA enabled [ 8.975201] power_meter ACPI000D:00: Found ACPI power meter. [ 8.981734] power_meter ACPI000D:00: Ignoring unsafe software power cap! [ 8.989219] power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info(). [ 9.003069] IPMI message handler: version 39.2 [ 9.024139] ipmi device interface [ 9.037543] ipmi_si: IPMI System Interface driver [ 9.042872] ipmi_si dmi-ipmi-si.0: probing via SMBIOS [ 9.048678] ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0 [ 9.056652] ipmi_si: Adding SMBIOS-specified kcs state machine [ 9.062941] ipmi_si IPI0001:00: probing via ACPI [ 9.068363] ipmi_si IPI0001:00: [io 0x0ca2] regsize 1 spacing 1 irq 0 [ 9.075442] ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI [ 9.084557] ipmi_si: Adding ACPI-specified kcs state machine [ 9.091068] ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 [ OK ] Created slice system-lvm2\x2dpvscan.slice. [ 9.121434] sd 4:0:0:0: Attached scsi generic sg0 type 0 [ 9.122753] input: PC Speaker as /devices/platform/pcspkr/input/input4 [ 9.124720] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt [ 9.126280] ipmi_si IPI0001:00: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed. [ 9.126424] RAPL PMU: API unit is 2^-32 Joules, 3 fixed counters, 655360 ms ovfl timer [ 9.126425] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules [ 9.126425] RAPL PMU: hw unit of domain package 2^-14 Joules [ 9.126425] RAPL PMU: hw unit of domain dram 2^-16 Joules [ 9.138324] ipmi_si IPI0001:00: Found new BMC (man_id: 0x002a7c, prod_id: 0x0833, dev_id: 0x20) Starting LVM event activation on device 259:0... [ 9.216365] ipmi_si IPI0001:00: IPMI kcs interface initialized [ 9.264461] iTCO_vendor_support: vendor-support=0 [ 9.267119] ipmi_ssif: IPMI SSIF Interface driver [ 9.267137] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 9.267229] iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460) [ 9.267616] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 9.284739] mei_me 0000:00:16.0: Device doesn't have valid ME Interface [ 9.401353] device-mapper: uevent: version 1.0.3 [ 9.419002] device-mapper: ioctl: 4.39.0-ioctl (2018-04-03) initialised: dm-devel@redhat.com [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ 9.492230] EDAC MC0: Giving out device to module sb_edac controller Broadwell SrcID#0_Ha#0: DEV 0000:ff:12.0 (INTERRUPT) [ 9.492231] EDAC sbridge: Ver: 1.1.2 [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Tell Plymouth To Write Out Runtime Data... Starting Restore /run/initramfs on shutdown... Starting Import network configuration from initramfs... [ OK ] Started Restore /run/initramfs on shutdown. [ 9.603467] intel_rapl: Found RAPL domain package [ OK ] Started LVM event activation on device 259:0. [ 9.609383] intel_rapl: Found RAPL domain dram [ 9.609387] intel_rapl: DRAM domain energy unit 15300pj [ OK ] Started Tell Plymouth To Write Out Runtime Data. [ OK ] Started Import network configuration from initramfs. Starting Create Volatile Files and Directories... [ OK ] Started Create Volatile Files and Directories. Starting Security Auditing Service... [ OK ] Started Security Auditing Service. Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Reached target System Initialization. [ OK ] Started Daily Cleanup of Temporary Directories. [ OK ] Listening on SSSD Kerberos Cache Manager responder socket. [ OK ] Started dnf makecache --timer. [ OK ] Started Run system activity accounting tool every 10 minutes. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. Starting System Security Services Daemon... Starting Load CPU microcode update... Starting NTP client/server... [ OK ] Started Hardware RNG Entropy Gatherer Daemon. [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting VDO volume services... [ OK ] Started Machine Check Exception Logging Daemon. [ OK ] Started irqbalance daemon. [ OK ] Started libstoragemgmt plug-in server daemon. Starting Authorization Manager... [ OK ] Started Generate summary of yesterday's process accounting. [ OK ] Started D-Bus System Message Bus. Starting Network Manager... Starting Resets System Activity Logs... [ OK ] Reached target sshd-keygen.target. [ OK ] Started daily update of the root trust anchor for DNSSEC. [ OK ] Reached target Timers. [ OK ] Started Load CPU microcode update. [ OK ] Started Resets System Activity Logs. [ OK ] Started NTP client/server. [ OK ] Started Network Manager. [ OK ] Reached target Network. [ OK ] Started Nagios Remote Plugin Executor. Starting /etc/rc.d/rc.local Compatibility... + '[' '!' -f /.cephlab_net_configured ']' + set +e + attempts=0 + myips= + '[' '' '!=' '' ']' + '[' 0 -ge 10 ']' ++ ip -4 addr ++ grep -oP '(?<=inet\s)\d+(\.\d+){3}' ++ grep -v '127.0.0.1\|127.0.1.1' Starting Dynamic System Tuning Daemon... Starting OpenSSH server daemon... Starting Network Manager Wait Online... Starting Hostname Service... + myips= + attempts=1 + sleep 1 [ OK ] Started Hostname Service. [ OK ] Started OpenSSH server daemon. Starting Network Manager Script Dispatcher Service... [ OK ] Started Network Manager Script Dispatcher Service. [ OK ] Started Authorization Manager. [ 12.344468] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 12.401610] IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready [ 12.409837] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready [ 12.474978] IPv6: ADDRCONF(NETDEV_UP): eno2: link is not ready [ 12.484004] IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready [ OK ] Started System Security Services Daemon. [ OK ] Reached target User and Group Name Lookups. Start[ 12.528354] ixgbe 0000:03:00.0: registered PHC device on enp3s0f0 ing Permit User Sessions... Starting Login Service... [ OK ] Started Permit User Sessions. [ OK ] Started Command Scheduler. [ OK ] Started Job spooling tools. [ OK ] Started Login Service. [ 12.631892] IPv6: ADDRCONF(NETDEV_UP): enp3s0f0: link is not ready [ 12.641197] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready [ OK ] Started VDO volume services. [ 12.685806] ixgbe 0000:03:00.1: registered PHC device on enp3s0f1 [ 12.799902] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready [ 12.915141] ixgbe 0000:03:00.1 enp3s0f1: detected SFP+: 4 + '[' '' '!=' '' ']' + '[' 1 -ge 10 ']' ++ ip -4 addr ++ grep -oP '(?<=inet\s)\d+(\.\d+){3}' ++ grep -v '127.0.0.1\|127.0.1.1' + myips= + attempts=2 + sleep 1 [ OK ] Started Dynamic System Tuning Daemon. [ 13.119114] ixgbe 0000:03:00.1 enp3s0f1: NIC Link is Up 10 Gbps, Flow Control: RX/TX [ 13.127313] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0f1: link becomes ready + '[' '' '!=' '' ']' + '[' 2 -ge 10 ']' ++ ip -4 addr ++ grep -oP '(?<=inet\s)\d+(\.\d+){3}' ++ grep -v '127.0.0.1\|127.0.1.1' + myips= + attempts=3 + sleep 1 + '[' '' '!=' '' ']' + '[' 3 -ge 10 ']' ++ ip -4 addr ++ grep -oP '(?<=inet\s)\d+(\.\d+){3}' ++ grep -v '127.0.0.1\|127.0.1.1' + myips=172.21.15.146 + attempts=4 + sleep 1 + '[' 172.21.15.146 '!=' '' ']' + set -e + '[' -n 172.21.15.146 ']' + for ip in $myips + timeout 1s ping -I 172.21.15.146 -nq -c1 172.21.0.1 ++ dig +short -x 172.21.15.146 @172.21.0.1 ++ sed 's/\.com.*/\.com/g' + newhostname=smithi146.front.sepia.ceph.com + '[' -n smithi146.front.sepia.ceph.com ']' + hostname smithi146.front.sepia.ceph.com ++ hostname -d + newdomain=front.sepia.ceph.com ++ hostname -s + shorthostname=smithi146 + echo smithi146 + grep -q front.sepia.ceph.com /etc/hosts + sed -i 's/.*front.sepia.ceph.com.*/172.21.15.146 smithi146.front.sepia.ceph.com smithi146/g' /etc/hosts + break + command -v zypper + command -v apt-get + '[' -e /.cephlab_rc_local ']' + exit 0 [ OK ] Started /etc/rc.d/rc.local Compatibility. Starting Hold until boot process finishes up... Starting Terminate Plymouth Boot Screen... CentOS Linux 8 (Core) Kernel 4.18.0-147.3.1.el8_1.x86_64 on an x86_64 Activate the web console with: systemctl enable --now cockpit.socket smithi146 login: [ 43.243535] KGDB: Registered I/O driver kgdboc [ 159.094753] systemd: 28 output lines suppressed due to ratelimiting [ 159.108225] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 159.140792] systemd[1]: Detected architecture x86-64. [ 200.230248] SELinux: Converting 2352 SID table entries... [ 200.235821] SELinux: Context system_u:object_r:insmod_var_run_t:s0 became invalid (unmapped). [ 201.636114] SELinux: policy capability network_peer_controls=1 [ 201.642038] SELinux: policy capability open_perms=1 [ 201.647001] SELinux: policy capability extended_socket_class=1 [ 201.652922] SELinux: policy capability always_check_network=0 [ 201.658755] SELinux: policy capability cgroup_seclabel=1 [ 201.664153] SELinux: policy capability nnp_nosuid_transition=1 [ 235.273420] SELinux: Converting 2423 SID table entries... [ 235.413736] SELinux: Context system_u:system_r:ejabberd_t:s0-s0:c0.c1023 became invalid (unmapped). [ 236.124287] SELinux: Context unconfined_u:system_r:ejabberd_t:s0-s0:c0.c1023 became invalid (unmapped). [ 236.717569] SELinux: policy capability network_peer_controls=1 [ 236.723494] SELinux: policy capability open_perms=1 [ 236.728457] SELinux: policy capability extended_socket_class=1 [ 236.734378] SELinux: policy capability always_check_network=0 [ 236.740219] SELinux: policy capability cgroup_seclabel=1 [ 236.745616] SELinux: policy capability nnp_nosuid_transition=1 [ 252.512309] SELinux: Converting 2423 SID table entries... [ 253.911368] SELinux: policy capability network_peer_controls=1 [ 253.917287] SELinux: policy capability open_perms=1 [ 253.922251] SELinux: policy capability extended_socket_class=1 [ 253.928173] SELinux: policy capability always_check_network=0 [ 253.934006] SELinux: policy capability cgroup_seclabel=1 [ 253.939403] SELinux: policy capability nnp_nosuid_transition=1 [ 303.317778] systemd[1]: systemd 239 running in system mode. (+PAM +AUDIT +SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=legacy) [ 303.351128] systemd[1]: Detected architecture x86-64. [ 314.218056] microcode update for Intel Broadwell-EP/EX (BDX-ML B/M/R0; family 6, model 79, [ 314.218056] stepping 1; CPUID 0x406f1) CPUs is disabled as it may cause system instability. [ 314.218056] Please refer to /usr/share/doc/microcode_ctl/caveats/06-4f-01_readme [ 314.218056] and /usr/share/doc/microcode_ctl/README.caveats for details. [ 525.075256] RPC: Registered named UNIX socket transport module. [ 525.081196] RPC: Registered udp transport module. [ 525.085909] RPC: Registered tcp transport module. [ 525.090622] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 606.793682] SGI XFS with ACLs, security attributes, no debug enabled [ 606.804297] XFS (dm-0): Mounting V4 Filesystem [ 606.814414] XFS (dm-0): Ending clean mount [ 652.392950] SELinux: Converting 2506 SID table entries... [ 653.758041] SELinux: policy capability network_peer_controls=1 [ 653.764401] SELinux: policy capability open_perms=1 [ 653.769799] SELinux: policy capability extended_socket_class=1 [ 653.776145] SELinux: policy capability always_check_network=0 [ 653.782396] SELinux: policy capability cgroup_seclabel=1 [ 653.788204] SELinux: policy capability nnp_nosuid_transition=1