[Enter `^Ec?' for help] [spying] €               CAS Latency : 6 DRAM Timings: Tras:15/Trp:6/Trcd:6/Twr:6/Trfc:44/Twtr:4/Trrd:4/Trtp:3/Tfaw:16 Memory Type : RDIMM(ECC mode)  Initializing USB Controllers .. Done.    (C) American Megatrends, Inc. 66-0100-000001-00101111-022510-LfdHvdImc-10605000-Y2KC  423C    AMIBIOS(C)2009 American Megatrends, Inc. Supermicro X8SIL/X8SIL-F BIOS Date: 02/25/10 Rev: 1.0c CPU : Intel(R) Xeon(R) CPU X3430 @ 2.40GHz  Speed : 2.40 GHz     X3430 @Initializing USB Controllers .. Done. 16376MB OK USB Device(s): 1 Keyboard, 1 Mouse, 2 Hubs(including IPMI KVM) Auto-detecting USB Mass Storage Devices .. 00 USB mass storage devices found and configured.   0078Press DEL to run Setup (F4 on Remote Keyboard) Press F12 if you want to boot from the network Press F11 for BBS POPUP (F3 on Remote Keyboard) The IMC is operating with DDR3 800MHz    CAS Latency : 6                           *** Waiting for F/W to become ready. 002/300 seconds elapsed..  *** Waiting for F/W to become ready. 003/300 seconds elapsed.. *** Waiting for F/W to become ready. 004/300 seconds elapsed.. *** Waiting for F/W to become ready. 005/300 seconds elapsed.. *** Waiting for F/W to become ready. 006/300 seconds elapsed.. *** Waiting for F/W to become ready. 007/300 seconds elapsed.. *** Waiting for F/W to become ready. 008/300 seconds elapsed.. *** Waiting for F/W to become ready. 009/300 seconds elapsed.. *** Waiting for F/W to become ready. 010/300 seconds elapsed.. *** Waiting for F/W to become ready. 011/300 seconds elapsed.. *** Waiting for F/W to become ready. 012/300 seconds elapsed.. *** Waiting for F/W to become ready. 013/300 seconds elapsed.. *** Waiting for F/W to become ready. 014/300 seconds elapsed.. *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ ************************************************************************ * ARC-1222 PCIEx8 RAID Controller - DRAM: 256(MB) / #Channels: 8 * * BIOS: V1.22d / Date: 2010-11-18 - F/W: V1.49 / Date: 2011-08-10 * ************************************************************************ * Bus/Dev/Func=1/0/0, I/O-Port=FB4EE000h, IRQ=10, BIOS=CA00:0h *** ID-LUN=00-0, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-1, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-2, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-3, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-4, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-5, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-6, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-7, Vol="Seagate ST31000528AS R001", Size=931(GB) *** RAID controller BIOS installed! *** Press to enter SETUP menu. 5 second(s) left .. *** Press to enter SETUP menu. 4 second(s) left .. *** Press to enter SETUP menu. 3 second(s) left .. *** Press to enter SETUP menu. 2 second(s) left .. *** Press to enter SETUP menu. 1 second(s) left ..     AMIBIOS(C)2009 American Megatrends, Inc. Supermicro X8SIL/X8SIL-F BIOS Date: 02/25/10 Rev: 1.0c CPU : Intel(R) Xeon(R) CPU X3430 @ 2.40GHz  Speed : 2.40 GHz  Press DEL to run Setup (F4 on Remote Keyboard) Press F12 if you want to boot from the network Press F11 for BBS POPUP (F3 on Remote Keyboard) The IMC is operating with DDR3 800MHz DRAM Timings: Tras:15/Trp:6/Trcd:6/Twr:6/Trfc:44/Twtr:4/Trrd:4/Trtp:3/Tfaw:16 Memory Type : RDIMM(ECC mode)  . Done. USB Device(s): 1 Keyboard, 1 Mouse, 2 Hubs(including IPMI KVM) Auto-detecting USB Mass Storage Devices .. 00 USB mass storage devices found and configured.  BMC Responding 0085          Initializing and establishing link...                     Intel(R) Boot Agent GE v1.3.22 Copyright (C) 1997-2008, Intel Corporation   CLIENT MAC ADDR: 00 25 90 00 58 96 GUID: 534D4349 0002 0090 2500 009025009758 DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ CLIENT MAC ADDR: 00 25 90 00 58 96 GUID: 534D4349 0002 0090 2500 009025009758 CLIENT IP: 172.21.6.118 MASK: 255.255.240.0 DHCP IP: 172.21.0.10 GATEWAY IP: 172.21.15.254 PXE->EB: !PXE at 9A4B:0070, entry point at 9A4B:0106  UNDI code segment 9A4B:44B0, data segment 9412:6390 (592-635kB)  UNDI device is PCI 04:00.0, type DIX+802.3 GATEWAY IP: 172.21.15.254  592kB free base memory after PXE unload iPXE initialising devices... iPXE initialising devices...ok  iPXE 1.0.0+ (1b67a) -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS HTTP HTTPS iSCSI TFTP VLAN AoE ELF MBOOT PXE bzImage Menu PXEXT Configuring (net0 00:25:90:00:58:96)... Configuring (net0 00:25:90:00:58:96).... Configuring (net0 00:25:90:00:58:96)..... Configuring (net0 00:25:90:00:58:96)...... ok Received DHCP answer on interface net0 tftp://172.21.0.72/default.ipxe... ok http://172.21.0.72/fog/service/ipxe/boot.php... ok bzImage... ok init.xz... Configuring (net0 00:25:90:00:58:96)...... ok init.xz... ok  scsi 0:0:16:0: alua: Attach failed (-22) Starting logging: OK Populating /dev using udev: udevd[2584]: error creating epoll fd: Function not implemented done Initializing random number generator... done. Starting eth0 interface and waiting for the link to come up udhcpc: started, v1.26.2 udhcpc: sending discover udhcpc: sending select for 172.21.6.118 udhcpc: lease of 172.21.6.118 obtained, lease time 43200 deleting routers adding dns 172.21.0.1 adding dns 172.21.0.2 ssh-keygen: generating new host keys: RSA DSA ECDSA ED25519 Starting sshd: /etc/ssh/sshd_config line 110: Deprecated option UsePrivilegeSeparation OK * Running post init scripts.........................Done ================================== === ==== ===== ==== === ========= == === == === === ======== ==== == ==== === === ======== ==== == ========= === ==== ==== == ========= === ======== ==== == === === === ======== ==== == ==== === === ========= == === == === === ========== ===== ==== ================================== ===== Free Opensource Ghost ====== ================================== ============ Credits ============= = https://fogproject.org/Credits = ================================== == Released under GPL Version 3 == ================================== Version: 1.5.0-RC-10 * Verifying network interface configuration.........Done * Checking Operating System.........................Linux * Checking CPU Cores................................4 * Send method.......................................NFS * Attempting to check in............................Done * Mounting File System..............................Done * Checking Mounted File System......................Done * Checking img variable is set......................Done * Attempting to send inventory......................Done * Using Image: mira_ubuntu_18.04 * Looking for Hard Disk.............................Done * Using Disk: /dev/sda * Write caching not supported * Using Hard Disk: /dev/sda * Preparing Partition layout * Erasing current MBR/GPT Tables....................Done * Restoring Partition Tables and GRUB (MBR).........Done * Inserting Extended partitions (Original)..........Done * Attempting to expand/fill partitions..............Done +--------------------------------+ | Attempting to deploy image | +--------------------------------+ | Using Partclone | +--------------------------------+ * Processing Partition: /dev/sda1 (1) * Imaging using Partclone (gzip) (B)0[?7h [?1l>Partclone v0.2.89 http://partclone.org Starting to restore image (-) to device (/dev/sda1) note: Storage Location 172.21.0.72:/images/, Image name mira_ubuntu_18.04 Calculating bitmap... Please wait... done! File system: EXTFS Device size: 8.3 GB = 2019544 Blocks Space in use: 7.5 GB = 1838796 Blocks Free Space: 740.3 MB = 180748 Blocks Block size: 4096 Byte Elapsed: 00:00:01, Remaining: 00:01:39, Completed: 1.00%, 0.00byte/min, current block: 0, total block: 2019544, Complete: 0.00% Elapsed: 00:00:01, Remaining: 00:00:28, Completed: 3.40%, 15.35GB/min, current block: 62696, total block: 2019544, Complete: 3.10% Elapsed: 00:00:02, Remaining: 00:00:33, Completed: 5.71%, 12.90GB/min, current block: 105308, total block: 2019544, Complete: 5.21% Elapsed: 00:00:03, Remaining: 00:00:35, Completed: 7.89%, 11.89GB/min, current block: 145500, total block: 2019544, Complete: 7.20% Elapsed: 00:00:04, Remaining: 00:00:33, Completed: 10.62%, 12.00GB/min, current block: 195792, total block: 2019544, Complete: 9.69% Elapsed: 00:00:05, Remaining: 00:00:31, Completed: 13.59%, 12.28GB/min, current block: 250436, total block: 2019544, Complete: 12.40% Elapsed: 00:00:06, Remaining: 00:00:32, Completed: 15.72%, 11.84GB/min, current block: 289604, total block: 2019544, Complete: 14.34% Elapsed: 00:00:07, Remaining: 00:00:31, Completed: 18.20%, 11.75GB/min, current block: 335288, total block: 2019544, Complete: 16.60% Elapsed: 00:00:08, Remaining: 00:00:31, Completed: 20.21%, 11.42GB/min, current block: 372408, total block: 2019544, Complete: 18.44% Elapsed: 00:00:09, Remaining: 00:00:31, Completed: 22.32%, 11.21GB/min, current block: 411064, total block: 2019544, Complete: 20.35% Elapsed: 00:00:10, Remaining: 00:00:30, Completed: 24.45%, 11.05GB/min, current block: 450232, total block: 2019544, Complete: 22.29% Elapsed: 00:00:11, Remaining: 00:00:29, Completed: 27.05%, 11.11GB/min, current block: 498104, total block: 2019544, Complete: 24.66% Elapsed: 00:00:12, Remaining: 00:00:27, Completed: 30.06%, 11.32GB/min, current block: 553400, total block: 2019544, Complete: 27.40% Elapsed: 00:00:13, Remaining: 00:00:27, Completed: 32.10%, 11.16GB/min, current block: 591032, total block: 2019544, Complete: 29.27% Elapsed: 00:00:14, Remaining: 00:00:25, Completed: 35.25%, 11.38GB/min, current block: 648888, total block: 2019544, Complete: 32.13% Elapsed: 00:00:15, Remaining: 00:00:24, Completed: 38.20%, 11.51GB/min, current block: 703160, total block: 2019544, Complete: 34.82% Elapsed: 00:00:16, Remaining: 00:00:23, Completed: 40.32%, 11.39GB/min, current block: 742072, total block: 2019544, Complete: 36.74% Elapsed: 00:00:17, Remaining: 00:00:23, Completed: 42.35%, 11.26GB/min, current block: 779448, total block: 2019544, Complete: 38.60% Elapsed: 00:00:18, Remaining: 00:00:22, Completed: 44.80%, 11.25GB/min, current block: 824620, total block: 2019544, Complete: 40.83% Elapsed: 00:00:19, Remaining: 00:00:21, Completed: 47.22%, 11.23GB/min, current block: 869164, total block: 2019544, Complete: 43.04% Elapsed: 00:00:20, Remaining: 00:00:20, Completed: 49.08%, 11.09GB/min, current block: 903328, total block: 2019544, Complete: 44.73% Elapsed: 00:00:21, Remaining: 00:00:19, Completed: 51.61%, 11.11GB/min, current block: 949920, total block: 2019544, Complete: 47.04% Elapsed: 00:00:22, Remaining: 00:00:18, Completed: 54.05%, 11.10GB/min, current block: 994720, total block: 2019544, Complete: 49.25% Elapsed: 00:00:23, Remaining: 00:00:17, Completed: 56.41%, 11.08GB/min, current block: 1038240, total block: 2019544, Complete: 51.41% Elapsed: 00:00:24, Remaining: 00:00:16, Completed: 59.22%, 11.15GB/min, current block: 1089952, total block: 2019544, Complete: 53.97% Elapsed: 00:00:25, Remaining: 00:00:16, Completed: 60.80%, 10.99GB/min, current block: 1118880, total block: 2019544, Complete: 55.40% Elapsed: 00:00:26, Remaining: 00:00:15, Completed: 62.59%, 10.88GB/min, current block: 1151904, total block: 2019544, Complete: 57.04% Elapsed: 00:00:27, Remaining: 00:00:14, Completed: 64.38%, 10.77GB/min, current block: 1184672, total block: 2019544, Complete: 58.66% Elapsed: 00:00:28, Remaining: 00:00:13, Completed: 66.94%, 10.80GB/min, current block: 1231776, total block: 2019544, Complete: 60.99% Elapsed: 00:00:29, Remaining: 00:00:12, Completed: 69.19%, 10.78GB/min, current block: 1273248, total block: 2019544, Complete: 63.05% Elapsed: 00:00:30, Remaining: 00:00:12, Completed: 71.31%, 10.74GB/min, current block: 1312160, total block: 2019544, Complete: 64.97% Elapsed: 00:00:31, Remaining: 00:00:10, Completed: 73.83%, 10.76GB/min, current block: 1358496, total block: 2019544, Complete: 67.27% Elapsed: 00:00:32, Remaining: 00:00:10, Completed: 75.44%, 10.65GB/min, current block: 1388192, total block: 2019544, Complete: 68.74% Elapsed: 00:00:33, Remaining: 00:00:09, Completed: 77.48%, 10.61GB/min, current block: 1425568, total block: 2019544, Complete: 70.59% Elapsed: 00:00:34, Remaining: 00:00:08, Completed: 79.86%, 10.61GB/min, current block: 1469344, total block: 2019544, Complete: 72.76% Elapsed: 00:00:35, Remaining: 00:00:07, Completed: 82.38%, 10.64GB/min, current block: 1515680, total block: 2019544, Complete: 75.05% Elapsed: 00:00:36, Remaining: 00:00:06, Completed: 84.76%, 10.64GB/min, current block: 1559456, total block: 2019544, Complete: 77.22% Elapsed: 00:00:37, Remaining: 00:00:05, Completed: 87.42%, 10.68GB/min, current block: 1609496, total block: 2019544, Complete: 79.70% Elapsed: 00:00:38, Remaining: 00:00:04, Completed: 89.78%, 10.68GB/min, current block: 1653016, total block: 2019544, Complete: 81.85% Elapsed: 00:00:39, Remaining: 00:00:03, Completed: 91.93%, 10.65GB/min, current block: 1692440, total block: 2019544, Complete: 83.80% Elapsed: 00:00:40, Remaining: 00:00:02, Completed: 94.99%, 10.73GB/min, current block: 1748760, total block: 2019544, Complete: 86.59% Elapsed: 00:00:41, Remaining: 00:00:00, Completed: 97.91%, 10.79GB/min, current block: 1802520, total block: 2019544, Complete: 89.25% Elapsed: 00:00:42, Remaining: 00:00:00, Completed: 100.00%, Rate: 10.76GB/min, current block: 1840868, total block: 2019544, Complete: 100.00% Total Time: 00:00:42, Ave. Rate: 10.8GB/min, 100.00% completed! Syncing... OK! Partclone successfully restored the image (-) to the device (/dev/sda1) Cloned successfully. * Resizing extfs volume (/dev/sda1).................Done * Resetting UUIDs for /dev/sda * Resetting swap systems * Stopping FOG Status Reporter......................Done * Task Complete * Updating Database.................................Done * Rebooting system as task is complete reboot: Restarting system €                DRAM Timings: Tras:15/Trp:6/Trcd:6/Twr:6/Trfc:44/Twtr:4/Trrd:4/Trtp:3/Tfaw:16 Memory Type : RDIMM(ECC mode)  Initializing USB Controllers .. Done.    (C) American Megatrends, Inc. 66-0100-000001-00101111-022510-LfdHvdImc-10605000-Y2KC  423C   AMIBIOS(C)2009 American Megatrends, Inc. Supermicro X8SIL/X8SIL-F BIOS Date: 02/25/10 Rev: 1.0c CPU : Intel(R) Xeon(R) CPU X3430 @ 2.40GHz  Speed : 2.40 GHz  Press DEL to run Setup (F4 on Remote Keyboard) Press F12 if you want to boot from the network Press F11 for BBS POPUP (F3 on Remote Keyboa   The IMC is operating with DDR3 800MHz CAS Latency : 6 Initializing USB Controllers .. Done. 16376MB OK USB Device(s): 1 Keyboard, 1 Mouse, 2 Hubs(including IPMI KVM) Auto-detecting USB Mass Storage Devices .. 00 USB mass storage devices found and configured.   0078                              *** Waiting for F/W to become ready. 001/300 seconds elapsed..  *** Waiting for F/W to become ready. 002/300 seconds elapsed.. *** Waiting for F/W to become ready. 003/300 seconds elapsed.. *** Waiting for F/W to become ready. 004/300 seconds elapsed.. *** Waiting for F/W to become ready. 005/300 seconds elapsed.. *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ *** Testing PCI bus functionality.. | *** Testing PCI bus functionality.. / *** Testing PCI bus functionality.. - *** Testing PCI bus functionality.. \ ************************************************************************ * ARC-1222 PCIEx8 RAID Controller - DRAM: 256(MB) / #Channels: 8 * * BIOS: V1.22d / Date: 2010-11-18 - F/W: V1.49 / Date: 2011-08-10 * ************************************************************************ * Bus/Dev/Func=1/0/0, I/O-Port=FB4EE000h, IRQ=10, BIOS=CA00:0h *** ID-LUN=00-0, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-1, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-2, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-3, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-4, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-5, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-6, Vol="Hitachi HUA722010CLA330 R001", Size=931(GB) *** ID-LUN=00-7, Vol="Seagate ST31000528AS R001", Size=931(GB) *** RAID controller BIOS installed! *** Press to enter SETUP menu. 5 second(s) left .. *** Press to enter SETUP menu. 4 second(s) left .. *** Press to enter SETUP menu. 3 second(s) left .. *** Press to enter SETUP menu. 2 second(s) left .. *** Press to enter SETUP menu. 1 second(s) left ..     AMIBIOS(C)2009 American Megatrends, Inc. Supermicro X8SIL/X8SIL-F BIOS Date: 02/25/10 Rev: 1.0c CPU : Intel(R) Xeon(R) CPU X3430 @ 2.40GHz  Speed : 2.40 GHz  Press DEL to run Setup (F4 on Remote Keyboard) Press F12 if you want to boot from the network Press F11 for BBS POPUP (F3 on Remote Keyboard) The IMC is operating with DDR3 800MHz DRAM Timings: Tras:15/Trp:6/Trcd:6/Twr:6/Trfc:44/Twtr:4/Trrd:4/Trtp:3/Tfaw:16 Memory Type : RDIMM(ECC mode)  . Done. USB Device(s): 1 Keyboard, 1 Mouse, 2 Hubs(including IPMI KVM) Auto-detecting USB Mass Storage Devices .. 00 USB mass storage devices found and configured.  BMC Responding 0085     Intel(R) Boot Agent GE v1.3.22 Copyright (C) 1997-2008, Intel Corporation  Initializing and establishing link...                   CLIENT MAC ADDR: 00 25 90 00 58 96 GUID: 534D4349 0002 0090 2500 009025009758 DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP./ DHCP.- DHCP.\ DHCP.| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ DHCP..| DHCP../ DHCP..- DHCP..\ CLIENT MAC ADDR: 00 25 90 00 58 96 GUID: 534D4349 0002 0090 2500 009025009758 CLIENT IP: 172.21.6.118 MASK: 255.255.240.0 DHCP IP: 172.21.0.10 GATEWAY IP: 172.21.15.254 PXE->EB: !PXE at 9A4B:0070, entry point at 9A4B:0106  UNDI code segment 9A4B:44B0, data segment 9412:6390 (592-635kB)  UNDI device is PCI 04:00.0, type DIX+802.3 GATEWAY IP: 172.21.15.254  592kB free base memory after PXE unload iPXE initialising devices... iPXE initialising devices...ok  iPXE 1.0.0+ (1b67a) -- Open Source Network Boot Firmware -- http://ipxe.org Features: DNS HTTP HTTPS iSCSI TFTP VLAN AoE ELF MBOOT PXE bzImage Menu PXEXT Configuring (net0 00:25:90:00:58:96)... Configuring (net0 00:25:90:00:58:96).... Configuring (net0 00:25:90:00:58:96)..... Configuring (net0 00:25:90:00:58:96)...... ok Received DHCP answer on interface net0                              **Ubuntu *  * Advanced options for Ubuntu *  * *  * *  * *  * *  * *  * *  * *  * *  * *  * *  * *  ******************************************************************************   Use the * and * keys to select which entry is highlighted.  Press enter to boot the selected OS, `e' to edit the commands  before booting or `c' for a command-line.  The highlighted entry will be executed automatically in 4s.    GNU GRUB version 2.02  ******************************************************************************  The highlighted entry will be executed automatically in 3s.  The highlighted entry will be executed automatically in 2s.  The highlighted entry will be executed automatically in 1s.            [ 0.000000] microcode: microcode updated early to revision 0xa, date = 2018-05-08 [ 0.000000] Linux version 4.15.0-101-generic (buildd@lgw01-amd64-003) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #102-Ubuntu SMP Mon May 11 10:07:26 UTC 2020 (Ubuntu 4.15.0-101.102-generic 4.15.18) [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-101-generic root=UUID=449da98e-59a3-418d-ac14-7d20dee554a5 ro pci=realloc=off console=ttyS2,115200n81 [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] Centaur CentaurHauls [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x00000000000903ff] usable [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf6e0fff] usable [ 0.000000] BIOS-e820: [mem 0x00000000bf79e000-0x00000000bf79ffff] type 9 [ 0.000000] BIOS-e820: [mem 0x00000000bf7a0000-0x00000000bf7adfff] ACPI data [ 0.000000] BIOS-e820: [mem 0x00000000bf7ae000-0x00000000bf7cffff] ACPI NVS [ 0.000000] BIOS-e820: [mem 0x00000000bf7d0000-0x00000000bf7dffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000bf7ed000-0x00000000bfffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fed3ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000043fffffff] usable [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] SMBIOS 2.6 present. [ 0.000000] DMI: Supermicro X8SIL/X8SIL, BIOS 1.0c 02/25/2010 [ 0.000000] e820: last_pfn = 0x440000 max_arch_pfn = 0x400000000 [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT [ 0.000000] total RAM covered: 16384M [ 0.000000] Found optimal setting for mtrr clean up [ 0.000000] gran_size: 64K chunk_size: 64K num_reg: 5 lose cover RAM: 0G [ 0.000000] e820: last_pfn = 0xbf6e1 max_arch_pfn = 0x400000000 [ 0.000000] found SMP MP-table at [mem 0x000ff780-0x000ff78f] [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] RAMDISK: [mem 0x32e91000-0x3573ffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000FA110 000024 (v02 ACPIAM) [ 0.000000] ACPI: XSDT 0x00000000BF7A0100 00007C (v01 SMCI 20100225 MSFT 00000097) [ 0.000000] ACPI: FACP 0x00000000BF7A0290 0000F4 (v04 022510 FACP1918 20100225 MSFT 00000097) [ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/64 (20170831/tbfadt-603) [ 0.000000] ACPI: DSDT 0x00000000BF7A05F0 006C55 (v02 10605 10605000 00000000 INTL 20051117) [ 0.000000] ACPI: FACS 0x00000000BF7AE000 000040 [ 0.000000] ACPI: FACS 0x00000000BF7AE000 000040 [ 0.000000] ACPI: APIC 0x00000000BF7A0390 000092 (v02 022510 APIC1918 20100225 MSFT 00000097) [ 0.000000] ACPI: MCFG 0x00000000BF7A0430 00003C (v01 022510 OEMMCFG 20100225 MSFT 00000097) [ 0.000000] ACPI: OEMB 0x00000000BF7AE040 000073 (v01 022510 OEMB1918 20100225 MSFT 00000097) [ 0.000000] ACPI: HPET 0x00000000BF7AA5F0 000038 (v01 022510 OEMHPET 20100225 MSFT 00000097) [ 0.000000] ACPI: GSCI 0x00000000BF7AE0C0 002024 (v01 022510 GMCHSCI 20100225 MSFT 00000097) [ 0.000000] ACPI: SSDT 0x00000000BF7B14F0 000363 (v01 DpgPmm CpuPm 00000012 INTL 20051117) [ 0.000000] ACPI: EINJ 0x00000000BF7AA630 000130 (v01 AMIER AMI_EINJ 20100225 MSFT 00000097) [ 0.000000] ACPI: BERT 0x00000000BF7AA7C0 000030 (v01 AMIER AMI_BERT 20100225 MSFT 00000097) [ 0.000000] ACPI: ERST 0x00000000BF7AA7F0 0001B0 (v01 AMIER AMI_ERST 20100225 MSFT 00000097) [ 0.000000] ACPI: HEST 0x00000000BF7AA9A0 0000A8 (v01 AMIER ABC_HEST 20100225 MSFT 00000097) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000043fffffff] [ 0.000000] NODE_DATA(0) allocated [mem 0x43ffc9000-0x43fff3fff] [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff] [ 0.000000] Normal [mem 0x0000000100000000-0x000000043fffffff] [ 0.000000] Device empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000008ffff] [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf6e0fff] [ 0.000000] node 0: [mem 0x0000000100000000-0x000000043fffffff] [ 0.000000] Reserved but unavailable: 113 pages [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000043fffffff] [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 7, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000 [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs [ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff] [ 0.000000] PM: Registered nosave memory: [mem 0x00090000-0x000dffff] [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf6e1000-0xbf79dfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf79e000-0xbf79ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7a0000-0xbf7adfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7ae000-0xbf7cffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7d0000-0xbf7dffff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7e0000-0xbf7ecfff] [ 0.000000] PM: Registered nosave memory: [mem 0xbf7ed000-0xbfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff] [ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfed1ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfed3ffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfed40000-0xfedfffff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff] [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffffffff] [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on bare hardware [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns [ 0.000000] random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0 [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1 [ 0.000000] percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u262144 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 4126335 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.15.0-101-generic root=UUID=449da98e-59a3-418d-ac14-7d20dee554a5 ro pci=realloc=off console=ttyS2,115200n81 [ 0.000000] Memory: 16367592K/16767424K available (12300K kernel code, 2481K rwdata, 4268K rodata, 2432K init, 2712K bss, 399832K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] Kernel/User page tables isolation: enabled [ 0.000000] ftrace: allocating 39364 entries in 154 pages [ 0.000000] Hierarchical RCU implementation. [ 0.000000] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=8. [ 0.000000] Tasks RCU enabled. [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8 [ 0.000000] NR_IRQS: 524544, nr_irqs: 488, preallocated irqs: 16 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [ttyS2] enabled [ 0.000000] ACPI: Core revision 20170831 [ 0.000000] ACPI: 2 ACPI AML tables successfully acquired and loaded [ 0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns [ 0.000000] APIC: Switch to symmetric I/O mode setup [ 0.004000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.024000] tsc: Fast TSC calibration using PIT [ 0.028000] tsc: Detected 2400.095 MHz processor [ 0.032000] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.19 BogoMIPS (lpj=9600380) [ 0.036001] pid_max: default: 32768 minimum: 301 [ 0.040039] Security Framework initialized [ 0.044001] Yama: becoming mindful. [ 0.048028] AppArmor: AppArmor initialized [ 0.058433] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.062098] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.064081] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.068070] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.072265] CPU0: Thermal monitoring enabled (TM1) [ 0.076010] process: using mwait in idle threads [ 0.080003] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7 [ 0.084001] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0 [ 0.088002] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization [ 0.092002] Spectre V2 : Mitigation: Full generic retpoline [ 0.096001] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch [ 0.100000] Spectre V2 : Enabling Restricted Speculation for firmware calls [ 0.104010] Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier [ 0.108001] Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl and seccomp [ 0.112028] MDS: Vulnerable: Clear CPU buffers attempted, no microcode [ 0.116181] Freeing SMP alternatives memory: 36K [ 0.236070] smpboot: CPU0: Intel(R) Xeon(R) CPU X3430 @ 2.40GHz (family: 0x6, model: 0x1e, stepping: 0x5) [ 0.240092] Performance Events: PEBS fmt1+, Nehalem events, 16-deep LBR, Intel PMU driver. [ 0.244002] core: CPU erratum AAJ80 worked around [ 0.248001] core: CPUID marked event: 'bus cycles' unavailable [ 0.252005] ... version: 3 [ 0.256001] ... bit width: 48 [ 0.260001] ... generic registers: 4 [ 0.264001] ... value mask: 0000ffffffffffff [ 0.268001] ... max period: 000000007fffffff [ 0.272001] ... fixed-purpose events: 3 [ 0.276001] ... event mask: 000000070000000f [ 0.280046] Hierarchical SRCU implementation. [ 0.285276] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter. [ 0.288014] smp: Bringing up secondary CPUs ... [ 0.292118] x86: Booting SMP configuration: [ 0.296004] .... node #0, CPUs: #1 #2 #3 [ 0.308028] smp: Brought up 1 node, 4 CPUs [ 0.316001] smpboot: Max logical packages: 2 [ 0.320001] smpboot: Total of 4 processors activated (19200.76 BogoMIPS) [ 0.328041] devtmpfs: initialized [ 0.328070] x86/mm: Memory block size: 128MB [ 0.333479] evm: security.selinux [ 0.340002] evm: security.SMACK64 [ 0.340002] evm: security.SMACK64EXEC [ 0.344001] evm: security.SMACK64TRANSMUTE [ 0.348000] evm: security.SMACK64MMAP [ 0.352001] evm: security.apparmor [ 0.355397] evm: security.ima [ 0.360001] evm: security.capability [ 0.364031] PM: Registering ACPI NVS region [mem 0xbf7ae000-0xbf7cffff] (139264 bytes) [ 0.372059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.380020] futex hash table entries: 2048 (order: 5, 131072 bytes) [ 0.388095] pinctrl core: initialized pinctrl subsystem [ 0.392114] RTC time: 15:30:00, date: 11/05/20 [ 0.396109] NET: Registered protocol family 16 [ 0.400088] audit: initializing netlink subsys (disabled) [ 0.408009] audit: type=2000 audit(1604590199.408:1): state=initialized audit_enabled=0 res=1 [ 0.416003] cpuidle: using governor ladder [ 0.420014] cpuidle: using governor menu [ 0.424047] ACPI: bus type PCI registered [ 0.428002] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5 [ 0.432064] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 0.436003] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 [ 0.440016] PCI: Using configuration type 1 for base access [ 0.445509] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.452113] ACPI: Added _OSI(Module Device) [ 0.456005] ACPI: Added _OSI(Processor Device) [ 0.460001] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.468001] ACPI: Added _OSI(Processor Aggregator Device) [ 0.472001] ACPI: Added _OSI(Linux-Dell-Video) [ 0.476001] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio) [ 0.480001] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics) [ 0.488206] ACPI: Executed 1 blocks of module-level executable AML code [ 0.497131] ACPI: Dynamic OEM Table Load: [ 0.504009] ACPI: SSDT 0xFFFF8BC32D123000 000F20 (v01 DpgPmm P001Ist 00000011 INTL 20051117) [ 0.512529] ACPI: Dynamic OEM Table Load: [ 0.516005] ACPI: SSDT 0xFFFF8BC32D010000 0004D5 (v01 PmRef P001Cst 00003001 INTL 20051117) [ 0.525014] ACPI: Interpreter enabled [ 0.528022] ACPI: (supports S0 S1 S4 S5) [ 0.532001] ACPI: Using IOAPIC for interrupt routing [ 0.536064] HEST: Table parsing has been initialized. [ 0.544004] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.552400] ACPI: GPE 0x1B active on init [ 0.556000] ACPI: Enabled 14 GPEs in block 00 to 3F [ 0.572825] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.580009] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI] [ 0.588331] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug] [ 0.596319] acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability] [ 0.604430] PCI host bridge to bus 0000:00 [ 0.608004] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.612002] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.620002] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.628001] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window] [ 0.636001] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window] [ 0.644001] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfed8ffff window] [ 0.652002] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.656177] pci 0000:00:03.0: enabling Extended Tags [ 0.660168] pci 0000:00:05.0: enabling Extended Tags [ 0.670581] pci 0000:00:03.0: PCI bridge to [bus 01] [ 0.676042] pci 0000:00:05.0: PCI bridge to [bus 02] [ 0.680044] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 0.696029] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 0.716027] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 0.720206] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode) [ 0.729077] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.736034] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 6 7 10 *11 12 14 15) [ 0.744085] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 *10 11 12 14 15) [ 0.752085] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) [ 0.756084] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.764085] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 6 *7 10 11 12 14 15) [ 0.772084] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 7 10 11 12 14 15) *0, disabled. [ 0.780007] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 6 7 10 11 12 14 *15) [ 0.788297] SCSI subsystem initialized [ 0.792030] pci 0000:06:03.0: vgaarb: setting as boot VGA device [ 0.796000] pci 0000:06:03.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.808003] pci 0000:06:03.0: vgaarb: bridge control possible [ 0.812001] vgaarb: loaded [ 0.816018] ACPI: bus type USB registered [ 0.820016] usbcore: registered new interface driver usbfs [ 0.824008] usbcore: registered new interface driver hub [ 0.828017] usbcore: registered new device driver usb [ 0.836036] EDAC MC: Ver: 3.0.0 [ 0.840080] PCI: Using ACPI for IRQ routing [ 0.848294] PCI: Discovered peer bus ff [ 0.852027] PCI host bridge to bus 0000:ff [ 0.856003] pci_bus 0000:ff: root bus resource [io 0x0000-0xffff] [ 0.864002] pci_bus 0000:ff: root bus resource [mem 0x00000000-0xfffffffff] [ 0.868001] pci_bus 0000:ff: No busn resource found for root bus, will use [bus ff-ff] [ 0.876828] NetLabel: Initializing [ 0.880002] NetLabel: domain hash size = 128 [ 0.884001] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.892018] NetLabel: unlabeled traffic allowed by default [ 0.896801] HPET: 8 timers in total, 5 timers will be used for per-cpu timer [ 0.904009] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 24, 25, 26, 27, 28, 0 [ 0.912001] hpet0: 8 comparators, 64-bit 14.318180 MHz counter [ 0.920032] clocksource: Switched to clocksource hpet [ 0.938131] VFS: Disk quotas dquot_6.6.0 [ 0.942091] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.949070] AppArmor: AppArmor Filesystem Enabled [ 0.953815] pnp: PnP ACPI init [ 0.956985] system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved [ 0.963604] system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved [ 0.970221] system 00:00: [mem 0xfe000000-0xfebfffff] has been reserved [ 0.976834] system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved [ 0.984901] system 00:05: [io 0x164e-0x164f] has been reserved [ 0.991065] system 00:06: [io 0x0a00-0x0a0f] has been reserved [ 0.996988] system 00:06: [io 0x0a10-0x0a1f] has been reserved [ 1.003157] system 00:07: [io 0x0ca2-0x0ca3] could not be reserved [ 1.009432] system 00:07: [io 0x0cf8-0x0cff] could not be reserved [ 1.015703] system 00:07: [io 0x04d0-0x04d1] has been reserved [ 1.021624] system 00:07: [io 0x0800-0x087f] has been reserved [ 1.027543] system 00:07: [io 0x0500-0x057f] has been reserved [ 1.033462] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.040076] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.046687] system 00:07: [mem 0xfed40000-0xfed8ffff] has been reserved [ 1.053523] system 00:08: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.060489] system 00:08: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.067227] system 00:09: [mem 0xe0000000-0xefffffff] has been reserved [ 1.074146] system 00:0a: [mem 0x000c0000-0x000cffff] could not be reserved [ 1.081115] system 00:0a: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.088082] system 00:0a: [mem 0xfed90000-0xffffffff] could not be reserved [ 1.095243] pnp: PnP ACPI: found 11 devices [ 1.106069] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 1.114989] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff] [ 1.121864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref] [ 1.129699] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 1.137533] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 1.145367] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff] [ 1.151545] pci 0000:00:03.0: PCI bridge to [bus 01] [ 1.156511] pci 0000:00:03.0: bridge window [mem 0xfb400000-0xfb4fffff] [ 1.163299] pci 0000:00:05.0: PCI bridge to [bus 02] [ 1.168276] pci 0000:00:1c.0: PCI bridge to [bus 03] [ 1.173245] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] [ 1.179341] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff] [ 1.186126] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref] [ 1.193866] pci 0000:00:1c.4: PCI bridge to [bus 04] [ 1.198830] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff] [ 1.204923] pci 0000:00:1c.4: bridge window [mem 0xfb500000-0xfb5fffff] [ 1.211708] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 1.219450] pci 0000:00:1c.5: PCI bridge to [bus 05] [ 1.224422] pci 0000:00:1c.5: bridge window [io 0xe000-0xefff] [ 1.230515] pci 0000:00:1c.5: bridge window [mem 0xfb600000-0xfb6fffff] [ 1.237300] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 1.245042] pci 0000:00:1e.0: PCI bridge to [bus 06] [ 1.250016] pci 0000:00:1e.0: bridge window [mem 0xfb700000-0xfbffffff] [ 1.256802] pci 0000:00:1e.0: bridge window [mem 0xfa000000-0xfaffffff 64bit pref] [ 1.264687] NET: Registered protocol family 2 [ 1.269240] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.277017] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.284036] TCP: Hash tables configured (established 131072 bind 65536) [ 1.290701] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.296921] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.303608] NET: Registered protocol family 1 [ 1.308439] pci 0000:06:03.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 1.316856] Unpacking initramfs... [ 1.840014] random: fast init done [ 1.972091] Freeing initrd memory: 41660K [ 1.976121] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.982563] software IO TLB: mapped [mem 0xbb6e1000-0xbf6e1000] (64MB) [ 1.989273] Scanning for low memory corruption every 60 seconds [ 1.995947] Initialise system trusted keyrings [ 2.000410] Key type blacklist registered [ 2.004458] workingset: timestamp_bits=36 max_order=22 bucket_order=0 [ 2.012166] zbud: loaded [ 2.015248] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.021257] fuse init (API version 7.26) [ 2.026694] Key type asymmetric registered [ 2.030798] Asymmetric key parser 'x509' registered [ 2.035717] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 2.043161] io scheduler noop registered [ 2.047090] io scheduler deadline registered [ 2.051389] io scheduler cfq registered (default) [ 2.056650] pcieport 0000:00:1c.0: enabling device (0104 -> 0107) [ 2.063273] pcieport 0000:00:03.0: AER enabled with IRQ 29 [ 2.068790] pcieport 0000:00:05.0: AER enabled with IRQ 30 [ 2.074289] pcieport 0000:00:03.0: Signaling PME with IRQ 29 [ 2.079969] pcieport 0000:00:05.0: Signaling PME with IRQ 30 [ 2.085651] pcieport 0000:00:1c.0: Signaling PME with IRQ 31 [ 2.091332] pcieport 0000:00:1c.4: Signaling PME with IRQ 32 [ 2.097009] pcieport 0000:00:1c.5: Signaling PME with IRQ 33 [ 2.103006] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 2.111362] ACPI: Power Button [PWRB] [ 2.115063] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 2.122536] ACPI: Power Button [PWRF] [ 2.126498] ERST: Failed to get Error Log Address Range. [ 2.131852] [Firmware Warn]: GHES: Poll interval is 0 for generic hardware error source: 1, disabled. [ 2.141164] GHES: APEI firmware first mode is enabled by WHEA _OSC. [ 2.147638] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled [ 2.174470] 00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 2.202433] 00:03: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 2.230388] 00:04: ttyS2 at I/O 0x3e8 (irq = 5, base_baud = 115200) is a 16550A [ 2.240888] Linux agpgart interface v0.103 [ 2.247452] loop: module loaded [ 2.250779] libphy: Fixed MDIO Bus: probed [ 2.254884] tun: Universal TUN/TAP device driver, 1.6 [ 2.260038] PPP generic driver version 2.4.2 [ 2.264405] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.270931] ehci-pci: EHCI PCI platform driver [ 2.275520] ehci-pci 0000:00:1a.0: EHCI Host Controller [ 2.280755] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 2.288160] ehci-pci 0000:00:1a.0: debug port 2 [ 2.296661] ehci-pci 0000:00:1a.0: irq 21, io mem 0xfb3fc000 [ 2.316031] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00 [ 2.321818] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.328608] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.335825] usb usb1: Product: EHCI Host Controller [ 2.340706] usb usb1: Manufacturer: Linux 4.15.0-101-generic ehci_hcd [ 2.347143] usb usb1: SerialNumber: 0000:00:1a.0 [ 2.351937] hub 1-0:1.0: USB hub found [ 2.355699] hub 1-0:1.0: 2 ports detected [ 2.359955] ehci-pci 0000:00:1d.0: EHCI Host Controller [ 2.365185] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2 [ 2.372591] ehci-pci 0000:00:1d.0: debug port 2 [ 2.381103] ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb3fa000 [ 2.400031] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00 [ 2.405820] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 2.412615] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.419839] usb usb2: Product: EHCI Host Controller [ 2.424719] usb usb2: Manufacturer: Linux 4.15.0-101-generic ehci_hcd [ 2.431157] usb usb2: SerialNumber: 0000:00:1d.0 [ 2.435934] hub 2-0:1.0: USB hub found [ 2.439693] hub 2-0:1.0: 2 ports detected [ 2.443834] ehci-platform: EHCI generic platform driver [ 2.449073] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.455252] ohci-pci: OHCI PCI platform driver [ 2.459707] ohci-platform: OHCI generic platform driver [ 2.464941] uhci_hcd: USB Universal Host Controller Interface driver [ 2.471343] i8042: PNP: No PS/2 controller found. [ 2.476053] i8042: Probing ports directly. [ 2.482778] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.487774] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.493025] mousedev: PS/2 mouse device common for all mice [ 2.498899] rtc_cmos 00:01: RTC can wake from S4 [ 2.503707] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0 [ 2.509869] rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 2.517532] i2c /dev entries driver [ 2.521444] device-mapper: uevent: version 1.0.3 [ 2.526206] device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com [ 2.535031] ledtrig-cpu: registered to indicate activity on CPUs [ 2.542101] NET: Registered protocol family 10 [ 2.552456] Segment Routing with IPv6 [ 2.556165] NET: Registered protocol family 17 [ 2.560872] Key type dns_resolver registered [ 2.566271] mce: Using 9 MCE banks [ 2.569728] RAS: Correctable Errors collector initialized. [ 2.575295] microcode: sig=0x106e5, pf=0x2, revision=0xa [ 2.580910] microcode: Microcode Update Driver: v2.2. [ 2.580931] sched_clock: Marking stable (2580895844, 0)->(2658633622, -77737778) [ 2.593779] registered taskstats version 1 [ 2.597898] Loading compiled-in X.509 certificates [ 2.606168] Loaded X.509 cert 'Build time autogenerated kernel key: 81757e40860ca54b8a45e323b66799c03c91a344' [ 2.616125] zswap: loaded using pool lzo/zbud [ 2.625483] Key type big_key registered [ 2.629340] Key type trusted registered [ 2.635577] Key type encrypted registered [ 2.639609] AppArmor: AppArmor sha1 policy hashing enabled [ 2.645123] ima: No TPM chip found, activating TPM-bypass! (rc=-19) [ 2.651454] ima: Allocated hash algorithm: sha1 [ 2.656005] evm: HMAC attrs: 0x1 [ 2.659618] APEI: Can not request [mem 0xbf7aa760-0xbf7aa7b3] for APEI BERT registers [ 2.667470] Magic number: 12:474:537 [ 2.671290] tty ttyS17: hash matches [ 2.675113] rtc_cmos 00:01: setting system clock to 2020-11-05 15:30:02 UTC (1604590202) [ 2.686500] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.692514] EDD information not available. [ 2.696122] usb 1-1: new high-speed USB device number 2 using ehci-pci [ 2.706152] Freeing unused kernel image memory: 2432K [ 2.728064] Write protecting the kernel read-only data: 20480k [ 2.734927] Freeing unused kernel image memory: 2008K [ 2.740508] Freeing unused kernel image memory: 1876K [ 2.755535] x86/mm: Checked W+X mappings: passed, no W+X pages found. [ 2.762133] x86/mm: Checking user space page tables [ 2.776116] usb 2-1: new high-speed USB device number 2 using ehci-pci [ 2.776813] x86/mm: Checked W+X mappings: passed, no W+X pages found. Loading, please wait... starting version[ 2.806289] random: systemd-udevd: uninitialized urandom read (16 bytes read) 237 [ 2.807143] random: udevadm: uninitialized urandom read (16 bytes read) [ 2.814481] random: systemd-udevd: uninitialized urandom read (16 bytes read) [ 2.860989] usb 1-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.867862] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.875626] hub 1-1:1.0: USB hub found [ 2.879544] hub 1-1:1.0: 6 ports detected [ 2.897400] pps_core: LinuxPPS API ver. 1 registered [ 2.902381] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 2.926197] PTP clock support registered [ 2.928056] Areca RAID Controller0: Model ARC-1222, F/W V1.49 2011-08-10 [ 2.937115] scsi host0: Areca SAS/SATA RAID Controller (RAID6 capable) [ 2.937115] arcmsr version v1.30.00.22-20151126 [ 2.937115] [ 2.950339] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled [ 2.952346] usb 2-1: New USB device found, idVendor=8087, idProduct=0020 [ 2.957015] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x3f impl SATA mode [ 2.963655] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.968382] scsi 0:0:0:0: Direct-Access Hitachi HUA722010CLA330 R001 PQ: 0 ANSI: 5 [ 2.968737] scsi 0:0:0:1: Direct-Access Hitachi HUA722010CLA330 R001 PQ: 0 ANSI: 5 [ 2.968926] scsi 0:0:0:2: Direct-Access Hitachi HUA722010CLA330 R001 PQ: 0 ANSI: 5 [ 2.969105] scsi 0:0:0:3: Direct-Access Hitachi HUA722010CLA330 R001 PQ: 0 ANSI: 5 [ 2.969289] scsi 0:0:0:4: Direct-Access Hitachi HUA722010CLA330 R001 PQ: 0 ANSI: 5 [ 2.969473] scsi 0:0:0:5: Direct-Access Hitachi HUA722010CLA330 R001 PQ: 0 ANSI: 5 [ 2.969654] scsi 0:0:0:6: Direct-Access Hitachi HUA722010CLA330 R001 PQ: 0 ANSI: 5 [ 2.969838] scsi 0:0:0:7: Direct-Access Seagate ST31000528AS R001 PQ: 0 ANSI: 5 [ 2.971382] scsi 0:0:16:0: Processor Areca RAID controller R001 PQ: 0 ANSI: 0 [ 2.971636] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.971765] sd 0:0:0:1: Attached scsi generic sg1 type 0 [ 2.971852] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst [ 2.971890] sd 0:0:0:2: Attached scsi generic sg2 type 0 [ 2.972027] sd 0:0:0:3: Attached scsi generic sg3 type 0 [ 2.972149] sd 0:0:0:4: Attached scsi generic sg4 type 0 [ 2.972270] sd 0:0:0:5: Attached scsi generic sg5 type 0 [ 2.972397] sd 0:0:0:6: Attached scsi generic sg6 type 0 [ 2.972517] sd 0:0:0:7: Attached scsi generic sg7 type 0 [ 2.972624] scsi 0:0:16:0: Attached scsi generic sg8 type 3 [ 2.972733] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.972759] sd 0:0:0:0: [sda] Write Protect is off [ 2.972800] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.973051] sda: sda1 [ 2.973297] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.973373] sd 0:0:0:1: [sdb] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.973395] sd 0:0:0:1: [sdb] Write Protect is off [ 2.973433] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.973928] sd 0:0:0:2: [sdc] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.973951] sd 0:0:0:2: [sdc] Write Protect is off [ 2.973991] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.974383] sd 0:0:0:3: [sdd] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.974414] sd 0:0:0:3: [sdd] Write Protect is off [ 2.974461] sd 0:0:0:4: [sde] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.974578] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.974595] sd 0:0:0:4: [sde] Write Protect is off [ 2.974743] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.974762] sd 0:0:0:1: [sdb] Attached SCSI disk [ 2.974787] sd 0:0:0:5: [sdf] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.974857] sd 0:0:0:5: [sdf] Write Protect is off [ 2.974877] sd 0:0:0:6: [sdg] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.974909] sd 0:0:0:6: [sdg] Write Protect is off [ 2.974921] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.974947] sd 0:0:0:6: [sdg] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.975316] sd 0:0:0:2: [sdc] Attached SCSI disk [ 2.975405] sd 0:0:0:7: [sdh] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB) [ 2.975429] sd 0:0:0:7: [sdh] Write Protect is off [ 2.975474] sd 0:0:0:7: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.975878] sd 0:0:0:3: [sdd] Attached SCSI disk [ 2.976301] sd 0:0:0:6: [sdg] Attached SCSI disk [ 2.976530] sd 0:0:0:5: [sdf] Attached SCSI disk [ 2.977920] sd 0:0:0:4: [sde] Attached SCSI disk [ 2.979163] hub 2-1:1.0: USB hub found [ 3.001659] sd 0:0:0:7: [sdh] Attached SCSI disk [ 3.003627] hub 2-1:1.0: 8 ports detected [ 3.019617] tsc: Refined TSC clocksource calibration: 2399.998 MHz [ 3.019621] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x229835b7123, max_idle_ns: 440795242976 ns [ 3.044355] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 3.061190] scsi host1: ahci [ 3.062788] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 3.072548] scsi host2: ahci [ 3.077170] e1000e 0000:04:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.083113] scsi host3: ahci [ 3.138841] e1000e 0000:04:00.0 0000:04:00.0 (uninitialized): registered PHC clock [ 3.146185] scsi host4: ahci [ 3.200078] e1000e 0000:04:00.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:25:90:00:58:96 [ 3.204643] random: crng init done [ 3.210679] e1000e 0000:04:00.0 eth0: Intel(R) PRO/1000 Network Connection [ 3.210762] e1000e 0000:04:00.0 eth0: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.210778] scsi host5: ahci [ 3.210963] scsi host6: ahci [ 3.211019] ata1: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8100 irq 35 [ 3.211021] ata2: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8180 irq 35 [ 3.211023] ata3: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8200 irq 35 [ 3.211025] ata4: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8280 irq 35 [ 3.211027] ata5: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8300 irq 35 [ 3.211030] ata6: SATA max UDMA/133 abar m2048@0xfb3f8000 port 0xfb3f8380 irq 35 [ 3.215513] random: 7 urandom warning(s) missed due to ratelimiting [ 3.224843] e1000e 0000:05:00.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [ 3.476802] usb 1-1.2: new full-speed USB device number 3 using ehci-pci [ 3.523306] ata1: SATA link down (SStatus 0 SControl 300) [ 3.534965] e1000e 0000:05:00.0 0000:05:00.0 (uninitialized): registered PHC clock [ 3.594037] usb 1-1.2: New USB device found, idVendor=0557, idProduct=2221 [ 3.599783] e1000e 0000:05:00.0 eth1: (PCI Express:2.5GT/s:Width x1) 00:25:90:00:58:97 [ 3.601066] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 3.601068] usb 1-1.2: Product: Hermon USB hidmouse Device [ 3.601069] usb 1-1.2: Manufacturer: Winbond Electronics Corp [ 3.628365] e1000e 0000:05:00.0 eth1: Intel(R) PRO/1000 Network Connection [ 3.635478] e1000e 0000:05:00.0 eth1: MAC: 3, PHY: 8, PBA No: 0101FF-0FF [ 3.635491] hidraw: raw HID events driver (C) Jiri Kosina [ 3.648680] e1000e 0000:05:00.0 enp5s0: renamed from eth1 [ 3.655634] usbcore: registered new interface driver usbhid [ 3.661209] usbhid: USB HID core driver [ 3.667458] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:0557:2221.0001/input/input5 [ 3.682607] hid-generic 0003:0557:2221.0001: input,hidraw0: USB HID v1.00 Mouse [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input0 [ 3.684399] e1000e 0000:04:00.0 enp4s0: renamed from eth0 [ 3.697498] input: Winbond Electronics Corp Hermon USB hidmouse Device as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:0557:2221.0002/input/input6 [ 3.776663] hid-generic 0003:0557:2221.0002: input,hidraw1: USB HID v1.00 Keyboard [Winbond Electronics Corp Hermon USB hidmouse Device] on usb-0000:00:1a.0-1.2/input1 [ 3.844280] ata2: SATA link down (SStatus 0 SControl 300) [ 4.032450] clocksource: Switched to clocksource tsc [ 4.164228] ata3: SATA link down (SStatus 0 SControl 300) [ 4.484237] ata4: SATA link down (SStatus 0 SControl 300) [ 4.804238] ata5: SATA link down (SStatus 0 SControl 300) [ 5.124180] ata6: SATA link down (SStatus 0 SControl 300) Begin: Loading essential drivers ... done. Begin: Running /scripts/init-premount ... done. Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done. Begin: Running /scripts/local-premount ... [ 5.192091] raid6: sse2x1 gen() 6654 MB/s [ 5.244085] raid6: sse2x1 xor() 5048 MB/s [ 5.296096] raid6: sse2x2 gen() 7918 MB/s [ 5.348090] raid6: sse2x2 xor() 5878 MB/s [ 5.400082] raid6: sse2x4 gen() 9129 MB/s [ 5.452085] raid6: sse2x4 xor() 6458 MB/s [ 5.456447] raid6: using algorithm sse2x4 gen() 9129 MB/s [ 5.461924] raid6: .... xor() 6458 MB/s, rmw enabled [ 5.466959] raid6: using ssse3x2 recovery algorithm [ 5.475822] xor: measuring software checksum speed [ 5.520074] prefetch64-sse: 11101.000 MB/sec [ 5.564078] generic_sse: 9812.000 MB/sec [ 5.568351] xor: using function: prefetch64-sse (11101.000 MB/sec) [ 5.595127] Btrfs loaded, crc32c=crc32c-intel Scanning for Btrfs filesystems done. Begin: Will now check root file system ... fsck from util-linux 2.31.1 [/sbin/fsck.ext4 (1) -- /dev/sda1] fsck.ext4 -a -C0 /dev/sda1 /dev/sda1: clean, 114201/61054976 files, 5648030/244190336 blocks done. [ 5.759039] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) done. Begin: Running /scripts/local-bottom ... done. Begin: Running /scripts/init-bottom ... done. [ 6.754003] ip_tables: (C) 2000-2006 Netfilter Core Team [ 6.812732] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 6.852375] systemd[1]: Detected architecture x86-64. Welcome to Ubuntu 18.04.4 LTS! [ 6.887080] systemd[1]: Set hostname to . [ 8.175307] systemd[1]: Created slice System Slice. [ OK ] Created slice System Slice. [ 8.196276] systemd[1]: Listening on LVM2 poll daemon socket. [ OK ] Listening on LVM2 poll daemon socket. [ 8.216260] systemd[1]: Listening on Syslog Socket. [ OK ] Listening on Syslog Socket. [ 8.236248] systemd[1]: Listening on LVM2 metadata daemon socket. [ OK ] Listening on LVM2 metadata daemon socket. [ 8.256263] systemd[1]: Listening on Journal Socket (/dev/log). [ OK ] Listening on Journal Socket (/dev/log). [ 8.276250] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe. [ OK ] Listening on /dev/initctl Compatibility Named Pipe. [ 8.300551] systemd[1]: Created slice system-serial\x2dgetty.slice. [ OK ] Created slice system-serial\x2dgetty.slice. [ OK ] Reached target System Time Synchronized. [ OK ] Started Forward Password Requests to Wall Directory Watch. [ OK ] Listening on Journal Socket. Mounting POSIX Message Queue File System... Mounting Huge Pages File System... Mounting NFSD configuration filesystem... [ OK ] Started Read required files in advance. [ OK ] Listening on Device-mapper event daemon FIFOs. Starting Monitoring of LVM2 mirrors…ng dmeventd or progress polling... [ 8.464015] RPC: Registered named UNIX socket transport module. [ 8.469937] RPC: Registered udp transport module. [ 8.474645] RPC: Registered tcp transport module. [ 8.474645] RPC: Registered tcp NFSv4.1 backchannel transport module. [ OK ] Listening on RPCbind Server Activation Socket. Mounting Kernel Debug File System... Starting Uncomplicated firewall... [ OK ] Listening on fsck to fsckd communication Socket. Starting Remount Root and Kernel File Systems... Starting Set the console keyboard layout... [ OK ] Listening on Journal Audit Socket. Starting Journal Service... Mounting RPC Pipe File System... [ OK ] Listening on udev Control Socket. Starting Create list of required st…ce nodes for the current kernel... [ OK ] Listening on udev Kernel Socket. Starting udev Coldplug all Devices... [ OK ] Created slice system-postfix.slice. [ 8.687313] Installing knfsd (copyright (C) 1996 okir@monad.swb.de). [ OK ] Created slice User and Session Slice. [ OK ] Reached target Slices. [ OK ] Reached target User and Group Name Lookups. [ 8.731044] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro,user_xattr [ OK ] Set up automount Arbitrary Executab…rmats File System Automount Point. Starting Load Kernel Modules... [ OK ] Mounted POSIX Message Queue File System. [ OK ] Mounted Huge Pages File System. [ OK ] Started Journal Service. [ OK ] Mounted NFSD configuration filesystem. [ OK ] Mounted Kernel Debug File System. [ OK ] Started Uncomplicated firewall. [ OK ] Started Remount Root and Kernel File Systems. [ OK ] Mounted RPC Pipe File System. [ OK ] Started Create list of required sta…vice nodes for the current kernel. [ OK ] Started LVM2 metadata daemon. Starting Create Static Device Nodes in /dev... Starting pNFS block layout mapping daemon... Starting Load/Save Random Seed... Activating swap /swapfile... [ 9.206122] lp: driver loaded but no devices found Starting Flush Journal to Persistent Storage... [ OK ] Started Set the console keyboard layout. [ OK ] Started udev Coldplug all Devices. [ 9.320328] Loading iSCSI transport class v2.0-870. [ OK ] Started pNFS block layout mapping daemon. [ OK ] Started Load/Save Random Seed. [ 9.445384] systemd-journald[403]: Received request to flush runtime journal from PID 1 [ OK ] Started Monitoring of LVM2 mirrors,…sing dmeventd or progress polling. [ 9.541989] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:2260988k FS [ OK ] Activated swap /swapfile. [ OK ] Reached target Swap. [ 9.623657] iscsi: registered transport (tcp) [ OK ] Started Create Static Device Nodes in /dev. [ OK ] Reached target Local File Systems (Pre). [ OK ] Reached target Local File Systems. Starting Tell Plymouth To Write Out Runtime Data... [ 9.724693] iscsi: registered transport (iser) Starting QEMU KVM preparation - module, ksm, hugepages... Starting AppArmor initialization... Starting Set console font and keymap... Starting Preprocess NFS configuration... Starting udev Kernel Device Manager... [FAILED] Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details. [ OK ] Started Tell Plymouth To Write Out Runtime Data. Mounting FUSE Control File System... Mounting Kernel Configuration File System... Starting Apply Kernel Variables... [ OK ] Mounted FUSE Control File System. [ OK ] Started Set console font and keymap. [ OK ] Started Preprocess NFS configuration. [ OK ] Mounted Kernel Configuration File System. [ OK ] Reached target NFS client services. Starting NFSv4 ID-name mapping service... [ OK ] Started Apply Kernel Variables. [ OK ] Started NFSv4 ID-name mapping service. [ OK ] Started QEMU KVM preparation - module, ksm, hugepages. [ OK ] Started Flush Journal to Persistent Storage. Starting Create Volatile Files and Directories... [ OK ] Started udev Kernel Device Manager. [ OK ] Started Dispatch Password Requests to Console Directory Watch. [ OK ] Reached target Local Encrypted Volumes. [ OK ] Reached target Paths. Starting Network Service... [ OK ] Started Create Volatile Files and Directories. Starting RPC bind portmap service... Starting Update UTMP about System Boot/Shutdown... [ OK ] Started Update UTMP about System Boot/Shutdown. [ OK ] Started Network Service. Starting Wait for Network to be Configured... Starting Network Name Resolution... [ OK ] Started Network Name Resolution. [ OK ] Reached target Host and Network Name Lookups. [ OK ] Started RPC bind portmap service. [ OK ] Reached target RPC Port Mapper. [ OK ] Started AppArmor initialization. Starting Raise network interfaces... [ OK ] Reached target System Initialization. Starting Docker Socket for the API. [ OK ] Started Discard unused blocks once a week. [ OK ] Listening on D-Bus System Message Bus Socket. [ OK ] Started Message of the Day. [ OK ] Started Daily Cleanup of Temporary Directories. [ 13.508133] ipmi_si dmi-ipmi-si.0: Cannot check clearing the rcv irq: -22 [ OK ] Listening on UUID daemon activation socket. [ OK ] Listening on Open-iSCSI iscsid Socket. [ OK ] Started Daily apt download activities. [ OK ] Started Daily apt upgrade and clean activities. [ OK ] Reached target Timers. [ OK ] Listening on Docker Socket for the API. [ OK ] Found device /dev/ttyS2. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch. [ OK ] Created slice system-lvm2\x2dpvscan.slice. Starting LVM2 PV scan on device 8:64... Starting LVM2 PV scan on device 8:16... Starting LVM2 PV scan on device 8:96... Starting LVM2 PV scan on device 8:32... Starting LVM2 PV scan on device 8:112... Starting LVM2 PV scan on device 8:80... Starting LVM2 PV scan on device 8:48... [ OK ] Started ifup for enp4s0. [ OK ] Reached target Sockets. [ OK ] Reached target Basic System. [ OK ] Started D-Bus System Message Bus. Starting Discard unused blocks... Starting LSB: Record successful boot for GRUB... [ OK ] Started Regular background program processing daemon. [ OK ] Started irqbalance daemon. Starting System Logging Service... [ OK ] Started LTTng session daemon. Starting Resets System Activity Data Collector... [ OK ] Started Set the CPU Frequency Scaling governor. Starting Login Service... Starting Dispatcher daemon for systemd-networkd... [ OK ] Started Self Monitoring and Reporting Technology (SMART) Daemon. Starting Accounts Service... [ OK ] Started System Logging Service. [ OK ] Started Wait for Network to be Configured. [ OK ] Started LVM2 PV scan on device 8:64. [ OK ] Started LVM2 PV scan on device 8:16. [ OK ] Started LVM2 PV scan on device 8:96. [ OK ] Started LVM2 PV scan on device 8:32. [ OK ] Started LVM2 PV scan on device 8:112. [ OK ] Started LVM2 PV scan on device 8:80. [ OK ] Started LVM2 PV scan on device 8:48. [ OK ] Started Discard unused blocks. [ OK ] Started Resets System Activity Data Collector. [ OK ] Started Login Service. [ OK ] Started LSB: Record successful boot for GRUB. Stopping Network Name Resolution... [ OK ] Stopped Network Name Resolution. Starting Network Name Resolution... [ OK ] Started Network Name Resolution. [ OK ] Started Accounts Service. [ OK ] Started Dispatcher daemon for systemd-networkd. [ OK ] Started Raise network interfaces. [ OK ] Reached target Network. [ OK ] Reached target Network is Online. Starting Availability of block devices... Starting Message of the Day... Starting Ubuntu FAN network setup... Starting Postfix Mail Transport Agent (instance -)... Starting Daily apt download activities... Starting OpenBSD Secure Shell server... [ OK ] Started Unattended Upgrades Shutdown. Starting Network Time Service... Starting containerd container runtime... Starting NFS Mount Daemon... Starting (i)SCSI target daemon... Starting /etc/rc.local Compatibility... [ OK ] Started Availability of block devices. [ OK ] Started containerd container runtime. [ OK ] Started NFS Mount Daemon. Starting NFS server and services... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started NFS server and services. [ OK ] Reached target Remote File Systems (Pre). [ OK ] Reached target Remote File Systems. Starting Permit User Sessions... Starting The Apache HTTP Server... [ OK ] Started Nagios Remote Plugin Executor. Starting LSB: Mount debugfs on /sys/kernel/debug... Starting LSB: Collectl monitors system performance.... [ OK ] Started Permit User Sessions. Stopping OpenBSD Secure Shell server... [ OK ] Stopped OpenBSD Secure Shell server. Starting OpenBSD Secure Shell server... [ OK ] Started OpenBSD Secure Shell server. [ OK ] Started /etc/rc.local Compatibility. Starting Hold until boot process finishes up... Starting Terminate Plymouth Boot Screen... [ OK ] Started Hold until boot process finishes up. [ OK ] Started Terminate Plymouth Boot Screen. [ OK ] Started Serial Getty on ttyS2. Starting Set console scheme... [ OK ] Started Set console scheme. [ OK ] Created slice system-getty.slice. [ OK ] Started Getty on tty1. [ OK ] Reached target Login Prompts. [ OK ] Reached target Multi-User System. [ OK ] Reached target Graphical Interface. [ OK ] Started Stop ureadahead data collection 45s after completed startup. Starting Update UTMP about System Runlevel Changes... [ OK ] Started Update UTMP about System Runlevel Changes. Ubuntu 18.04.4 LTS mira065.front.sepia.ceph.com ttyS2 mira065 login: